Professional Documents
Culture Documents
Ansys Training
Ansys Training
Ansys Training
G is +9.81m/s2
ANSYS Training
Exercise 5: Plate (2D)
Ansys Training
1. Main menu/Prep/ Material props/ Material Library/ Select Units
2. Main menu/Prep/ Element type/Add, edit, Delete/Add/solid- 8 node 183
* go to option and select plan stress
3. Main menu/Prep/Material Properties/Material Models/Structural/
Linear/Elastic/Isotropic>Ex =?, PRXY=?
* One material properties should be used.
4. Main Prep/Modeling/operate/Booleans/subtract/Area/1 apply and 2
apply
5. Main Prep/Modeling/Mesh tool > Free mesh>shape tri> use refine
6. Main /Prep/Loads/Define Loads/Apply/Structural/ Displacement/ On left
line
7. Main/Prep/Loads/Define Loads/Apply/ Structural/ Force /On key point
* Force in horizontal direction should be possitive.
8. Main/ Solution/Solve/Current L.S
9. Main/General Postproc/Result Viewer
Ansys Training
ANSYS Training
Exercise 6: Modeling plate with curve
1. Main Prep/Modeling/Create/Area/rectangular
2. Main Prep/Modeling/Create/Area/circle (Diameter=20cm)
3. Main Prep/Modeling/operate/ Booleans/Add/ area1 and area 2
4. Main Prep/Modeling/Create/Area/circle (Diameter=8cm)
5. Main Prep/Modeling/operate/ Booleans/Subtract/ Add area(1+2) and area3
ANSYS Training
ANSYS Training
Exercise 7: Annulus and solid circle