Professional Documents
Culture Documents
R&R Throttle Valve Body PDF
R&R Throttle Valve Body PDF
20-P-1262E Page 1 of 3
AR30.20-P-1262E Removing and installing electronic accelerator actuator with throttle valve body 15.8.94
ENGINE 119.97
P30.20-0202-06
Removing, installing
2 Loosen hose clamp (32) and remove Note installation position (arrows). WH58.30-Z-1002-
connecting hose (31). 06A
3 Undo plug-in connection on throttle
When replacing the throttle actuator
actuator (M16/1x1) to release wire.
ensure that the wiring is routed
correctly.
4 Detach linkage rod (41) and return Note installation position of return
spring (42). spring (42).
5 Unscrew vacuum line (24, 24a) from 000 589 70 03 00
brake booster.
6 Pull off vent hose (29) for positive
crankcase ventilation at separation point
(arrow).
7 Unscrew bolts (38). Replace microencapsulated bolts.
BA30.20-P-1001-
01A
8 Tilt electronic accelerator pedal throttle Clean joint surface and replace BR00.45-Z-1010-
actuator (M16/1) with control-side gasket (36) . Place gasket with Hylomar 01A
throttle-body opening upward, then on the actuator.
rotate 1/4 turn counterclockwise to
remove.
9 Install in the reverse order
10 Adjust throttle control With ASR Code 471a AR30.10-P-1010EA
Without ASR Code 471a AR30.10-P-1010EB
000 589 70 03 00
Repair materials
Number Designation Order number
BR00.45-Z-1010-01A Sealant A 001 989 25 20