Professional Documents
Culture Documents
A. 0.89 B. 0.23 C. 0.16 D. None of These
A. 0.89 B. 0.23 C. 0.16 D. None of These
Rate of heat transfer in case of forced convection when compared with natural convection is
A.higher
B.lower
C.equal
D.independent
Q2. Temperature distribution in case of heat flow by conduction for a cylindrical body with
internal heat source is
A.Asymptotic in nature
B.parabolic in nature
C.hyperbolic in nature
D.linear in nature
Q3. Lumped Heat-transfer analysis of a solid object suddenly exposed to a fluid medium at a
different temperature is valid when
A.Boit Number <0.1
B.Boit Number >0.1
C.Fourier Number >0.1
D.Boit Number <0.01
Q4. For a glass plate transmissivity and reflectivity are specified as 0.76 and 0.08 respectively,
the absorptivity of the glass plate is
A. 0.89
B. 0.23
C. 0.16
D. None of these
Q5. The emissive power of a blackbody is P. If its absolute temperature is doubled, the emissive
power becomes.
A. 2P
B. 4P
C. 8P
D. 16P
Q8. What is the purpose of using fins in a particular heat transfer system?
A. to decrease rate of heat transfer
B. to increase rate of heat transfer
C. to maintain rate of heat transfer at a constant rate
D. cannot say
Q9. Temperature at the end tip of the fin having uniform cross-sectional area is
A. maximum
B. minimum
C. similar to the heat generation temperature
D. unpredictable
Q10.In the process of heat transfer through extended surfaces or fins, the entire surface area is at
A. the same constant temperature
B. different temperatures
C. maximum base temperature
D. minimum temperature
BT18CME062
SIDDHANT SINHA