Professional Documents
Culture Documents
Delta Waterproofing - Method Statement
Delta Waterproofing - Method Statement
1. Inspect the installed gutter and ensure the surface is free of grease and
contaminants
2. Use electrical grinder to sand the metal surface and wipe with Methyl
Ethyl Ketone (MEK, a mild solvent) for better adhesion of materials.
5. After surface curing (approx. 2 hours) of primer, spray apply one coat
(dry film, approx. 1mm thick) of DELTAShield HP 400 Pure Polyurea.
(Approx. 1min tack free time).
6. After surface curing (approx. 1min), hand apply one coat of DELTAShield
F 100 Top Coat and Tecnoplastic C (dry film, 50-150um thickness) on
the wet topcoat of DELTAShield HP 400 to enhance anti-skid function.
TECNOPLASTIC C is a kind of plastic (polyamide) micronized specially
selected for texturing finishing resins
The mixing ratio of DELTAShield F 100 Top Coat is 4 parts of Comp A.
to 1 part of Comp.B. The curing time of dry-to-over-coat is 3 hours.
7. After the curing of the mixture of DELTAShield F 100 Top Coat and
Tecnoplastic C, hand apply the finish coat of DELTAShield F 100 Top
Coat. Colour to be selected and approved by CLP Representative.