This document provides a summary of new and revised codes and standards from BSI Updates in July and August 2019. It also provides guidance on choosing the dynamic modulus of concrete for floor vibration analysis. Specifically, it recommends using a dynamic modulus of 22.0 GPa for light weight concrete or 30.0 GPa for normal weight concrete, rather than enhancing the secant modulus Ecm by 10%, as is done in continental Europe. This provides reasonable results for estimating the dynamic response of composite or concrete structures subjected to small amplitude vibrations.
Original Description:
AD 433 - Dynamic modulus of concrete for floor vibration analysis, September 2019
Original Title
AD 433 - Dynamic modulus of concrete for floor vibration analysis, September 2019
This document provides a summary of new and revised codes and standards from BSI Updates in July and August 2019. It also provides guidance on choosing the dynamic modulus of concrete for floor vibration analysis. Specifically, it recommends using a dynamic modulus of 22.0 GPa for light weight concrete or 30.0 GPa for normal weight concrete, rather than enhancing the secant modulus Ecm by 10%, as is done in continental Europe. This provides reasonable results for estimating the dynamic response of composite or concrete structures subjected to small amplitude vibrations.
This document provides a summary of new and revised codes and standards from BSI Updates in July and August 2019. It also provides guidance on choosing the dynamic modulus of concrete for floor vibration analysis. Specifically, it recommends using a dynamic modulus of 22.0 GPa for light weight concrete or 30.0 GPa for normal weight concrete, rather than enhancing the secant modulus Ecm by 10%, as is done in continental Europe. This provides reasonable results for estimating the dynamic response of composite or concrete structures subjected to small amplitude vibrations.
NEW WORK STARTED EN 1993-1-10 BS EN 10219-2:2019 – TC BRITISH STANDARDS
Eurocode 3. Design of steel Tracked Changes. Cold formed WITHDRAWN EN 1993-1-2 structures. Material toughness and welded steel structural hollow Eurocode 3. Design of steel BS 5975:2008+A1:2011 through-thickness properties sections. Tolerances, dimensions and structures. General rules. Structural Code of practice for temporary Will supersede BS EN 1993-1-10:2005 sectional properties fire design works procedures and the No current standard is superseded Will supersede BS EN 1993-1-2:2005 EN 1993-1-11:2006 permissible stress design of Eurocode 3. Design of steel BS EN ISO 14174:2019 falsework EN 1993-1-3 structures. Design of structures with Welding consumables. Fluxes Superseded by BS 5975:2019 Eurocode 3. Design of steel tension components for submerged arc welding and structures. General rules. BS EN ISO 14174:2012 Will supersede BS EN 1993-1-11:2006 electroslag welding. Classification Supplementary rules for cold- Welding consumables. Fluxes Supersedes BS EN ISO 14174:2012 formed members and sheeting EN 1993-2 for submerged arc welding and Will supersede BS EN 1993-1-3:2006 Eurocode 3. Design of steel electroslag welding. Classification structures. Steel Bridges Superseded by BS EN ISO 14174:2019 EN 1993-1-4 BRITISH STANDARDS REVIEWED Will supersede BS EN 1993-2:2006 Eurocode. Design of steel structures. AND CONFIRMED General rules. Supplementary rules BS EN ISO 2560:2009 DRAFT BRITISH STANDARDS FOR for stainless steels BRITISH STANDARDS Welding consumables. Covered PUBLIC COMMENT - ADOPTIONS Will supersede BS EN 1993-1- electrodes for manual metal arc 4:2006+A1:2015 BS 5975:2019 19/30396713 DC welding of non-alloy and fine grain Code of practice for temporary BS EN 10340-2 Steel castings for EN 1993-1-5 steels. Classification works procedures and the structural uses. Technical delivery Eurocode 3. Design of steel permissible stress design of BS EN 10111:2008 conditions structures. Plated structural falsework Continuously hot rolled low Comments for the above document elements Supersedes BS 5975:2008+A1:2011 carbon steel sheet and strip for were required by 9 July, 2019 Will supersede BS EN 1993-1- cold forming. Technical delivery 5:2006+A1:2017 19/30382759 DC conditions BS EN 17412 Building Information EN 1993-1-9 BS EN PUBLICATIONS Modelling. Level of Information Eurocode 3. Design of steel BS EN 10210-2:2019 – TC Need. Concepts and principles structures. Fatigue Tracked Changes. Hot finished Comments on the above document Will supersede BS EN 1993-1-9:2005 steel structural hollow sections. were required by 19 August, 2019 Tolerances, dimensions and sectional properties No current standard is superseded
AD 433: Dynamic modulus of
concrete for floor vibration analysis The purpose of this AD note is to provide advice from which the natural frequency of the beam When using references 2 and 3, the stated on the choice of elastic modulus of concrete is to be determined. The dynamic behaviour values for dynamic modulus should not be when undertaking the vibration analysis of a generally involves small amplitude vibrations to enhanced by 10%. composite floor. which the secant modulus at 28 days Ecm is not The elastic modulus of concrete depends on relevant. Instead, given the uncertainty regarding the constituent materials of the concrete mix and the parameters which affect the actual properties Contact: Callum Heavens on the age of the concrete. It also depends on the of concrete (type of aggregate, age of concrete, Tel: 01344 636555 duration of loading and whether the concrete is compressive strength etc.), an approximate Email: advisory@steel-sci.com assumed to be cracked or un-cracked. Table 3.1 in dynamic modulus should be used which (from BS EN 1992-1-1 gives strength and deformation practice) gives reasonable results. characteristics for concrete by strength class. The SCI publication P354 Design of floors for References values are tabulated for normal weight concrete vibration: a new approach2 and Concrete Centre 1. European Commission – Technical Steel Research: with quartzite aggregates and are based on the publication: A design guide for footfall induced Generalisation of criteria for floor vibrations for cylinder strength fck at 28 days. The formula for vibration of structures3, both recommend the industrial, office, residential and public building and the secant modulus Ecm is: Ecm = 22[(fck+8)/10]0.3. same values for the dynamic modulus of concrete gymnastic halls, RFCS; Report EUR 21972 EN, ISBN The value is in GPa when the cylinder strength which is appropriate for the estimation of the 92-79-01705-5, 2006. is in MPa. Adjustments to the values for quartzite dynamic response of composite or concrete 2. Smith, A L, Hicks, S J, Devine P J, Design of floors aggregates are given for limestone, sandstone structures. Values are given for normal weight and for vibration: a new approach, Revised edition, and basalt aggregates. Practice in continental light weight concrete as follows: February 2009, SCI publication P354 Europe is to use a dynamic modulus based on Ecm 3. Willford, M R, Young, P, A design guide for footfall enhanced by 10%1. Uncracked concrete Dynamic modulus (GPa) induced vibration of structures, Concrete Centre, In UK practice, values for elastic modulus November 2006 Light weight 22.0 determined from the code are not considered suitable for the calculation of beam deflections Normal weight 38.0