Professional Documents
Culture Documents
Final Exam. Mdbn03e
Final Exam. Mdbn03e
Final Exam. Mdbn03e
General Instruction: In any type of bond paper(recycled paper will do), answer the following problems with correct
proper solutions. Submit your answer as much as possible on or before June 3, 2020 11:59PM. Asking me a question
that is related to the concept of the problem is strictly prohibited.
Situation 2. Consider the bolted joint shown in the figure. The force P is 30 kN and the diameter of the bolt is 10 mm.
1.) Determine the average value of the shearing stress existing across either of the planes a-a or b-b
2.) If the maximum allowable working stress in shear is 93 MPa, determine the required diameter of the bolt.
Situation 3. The cross section shown in the figure is 50 x 200 mm and point A is 50 mm above the center of the beam.
Assume the 100 kN load acts at the centroid of the cross section. Hint: Be sure to include the shearing stresses caused by
the applied load.