Professional Documents
Culture Documents
Steps Involved in Tablet Formulation/ Procedure For Manufacturing Tablets
Steps Involved in Tablet Formulation/ Procedure For Manufacturing Tablets
Steps Involved in Tablet Formulation/ Procedure For Manufacturing Tablets
Dispensing useful also as an adjunct in the treatment of tonic-clonic, myoclonic, and atonic seizures
There are many ways to design a weighing area; however, it must be designed SO as to Sampling
minimize the generation of dust. By having adequate dust-collection equipment placed
Twenty tablets were weighed accurately and powdered . the powder equivalent to 20 mg of Cidamex
strategically, material may be prevented from becoming airborne and from unnecessarily
settling on table and floor surfaces. This will greatly reduce the time required to clean each (ACM) and transferred into a small conical flask, extracted three successive times each with 30 ml of
area after the specific weighing is accomplished. methanol
-The weighing must be performed on calibrated weighing devices that are sufficiently
sensitive to the quantity of materials being weighed. Procedure for its method of analysis
-Each raw material must be weighed by one operator and checked by a second operator. - Spectrophotometric
A weigh ticket must be generated for each material weighed
A simple and sensitive spectrophotometric method was developed for the
-At the end of each raw material lot, reconciliation must be performed and any determination of acetazolamide (ACM) in pure form and pharmaceutical
significant discrepancies thoroughly investigated.
preparations.