Professional Documents
Culture Documents
D342 Vehicular Engine 76V00001-00504 (Machine)
D342 Vehicular Engine 76V00001-00504 (Machine)
D342 Vehicular Engine 76V00001-00504 (Machine)
Cerrar SIS
Pantalla anterior
Desarmado y Armado
D342 VEHICULAR ENGINE FOR D8K TRACTOR
Número de medio -SENR7010-01 Fecha de publicación -01/09/1977 Fecha de actualización -12/10/2001
start by:
a) remove flywheel
3. Install tooling (A) on thrower (4). Heat the outer diameter of the thrower with an open flame to a maximum
https://127.0.0.1/...isweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp[30/11/2020 08:56:46]
D342 VEHICULAR ENGINE 76V00001-00504 (MACHINE)(UEG0890S - 00) - Sistemas y componentes
temperature of 400°F (205°C). Put a force on the thrower immediately with tooling (A) and remove the thrower.
NOTICE
Do not use an old oil thrower that has been removed from the
crankshaft.
1. Heat the thrower to a maximum temperature of 500°F (260°C). Install the thrower on the crankshaft with tooling
(A). Make sure the thrower is against the flange on the crankshaft.
2. Put a light amount of clean engine oil on the rear seal ring and the surface that its inside diameter makes contact
with.
3. Install the rear seal ring (1) with the opening at the top and the face of the seal with the word "out" toward the
flywheel.
4. Put the baffle in position on the crankshaft. Install the locks and bolts that hold it.
end by:
a) install flywheel
Copyright 1993 - 2020 Caterpillar Inc. Mon Nov 30 08:56:33 EST 2020
https://127.0.0.1/...isweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp[30/11/2020 08:56:46]
D342 VEHICULAR ENGINE 76V00001-00504 (MACHINE)(UEG0890S - 00) - Sistemas y componentes
https://127.0.0.1/...isweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp[30/11/2020 08:56:46]