Professional Documents
Culture Documents
19ASC303A Assignment 8 PDF
19ASC303A Assignment 8 PDF
19ASC303A Assignment 8 PDF
Assignment # 8
Course Leader:
1
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences
Course Code: 19ASC303A
Course Title: Aerodynamics – 2
(Fundamentals of Compressible Flow)
Course Leader:
Dr. Jayahar Sivasubramanian
JayaharS.MSRUAS@gmail.com
2
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences
Assignment # 8
1. Consider air entering a heated duct at p1 = 1 atm and T1 = 288
K. Ignore the effect of friction. Calculate the amount of heat
per unit mass (in joules per kilogram) necessary to choke the
flow at the exit of the duct, as well as the pressure and
temperature at the duct exit, for an inlet Mach number of (a)
M1 = 2.0 (b) M1 = 0.2
3
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences
Assignment # 8
3. Air is flowing through a pipe of 0.02 m inside diameter and 40
m length. The conditions at the exit of the pipe are M2 = 0.5, p2 =
1 atm, and T2 = 270 K. Assuming adiabatic, one dimensional flow,
with a local friction coefficient of 0.005, calculate M1, p1 and T1 at
the entrance to the pipe.
4
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences
Assignment # 8
5. Consider an oblique shock wave with a wave angle equal to
35o. Upstream of the wave, p1 = 2000 lb/ft2, T1 = 520oR, and V1 =
3355 ft/s. Calculate p2, T2, V2, and the flow deflection angle.
5
Faculty of Engineering & Technology © Ramaiah University of Applied Sciences