Professional Documents
Culture Documents
STD 5081,15 (VSC 5081,159) PDF
STD 5081,15 (VSC 5081,159) PDF
Dept / Issued by 6857 Torbjörn Holmqvist Issue 1 Established 2005-06 UM Page 1(40)
The English language version is the original and the Den engelska språkversionen är originalversion och
reference in case of dispute. skall åberopas i händelse av tvist.
Orientation Orientering
There is no corresponding Swedish or international Standarden saknar motsvarighet i svensk och inter-
standard available but the corresponding way of listing nationell standard, men i DIN 13 finns motsvarande
the values can be found in DIN 13. sätt att lista värdena.
This VCS standard is identical to the previously issued Denna VCS-standard är identisk med tidigare utgiven
STD 5081,15 issue 5, which it replaces for Volvo STD 5081,15, utgåva 5, och ersätter denna för Volvo
Cars. Personvagnar.
Scope Omfattning
This standard contains calculated limits of sizes for ISO Denna standard upptar framräknade gränsmått för
metric screw threads with normal length of engagement. metriska ISO-gängor med normal ingreppslängd.
The values have been calculated with the help of Värdena är framräknade med hjälp av SS-ISO
ISO 965/1-3. 965/1-3.
General Allmänt
For the minor diameter of external threads and for the För utvändig gängas innerdiameter och för invändig
major diameter of internal threads the table values refer gängas ytterdiameter avser tabellvärdena läget för
to the position of the point on the profile where the den punkt på profilen där kravet på rak flank upphör.
requirement for a straight flank ceases.