Professional Documents
Culture Documents
2019wireless Egg Node 2 User Guide March2019 1.1
2019wireless Egg Node 2 User Guide March2019 1.1
2019wireless Egg Node 2 User Guide March2019 1.1
com
WIRELESS
EGG NODE II
MULTI NODE
VERSION
QUICK START
GUIDE
Section A
IN THIS GUIDE Connect the Gateway
Section C
Follow this guide to learn
Operate and Discover Nodes
how to perform wireless node
sampling in just a few steps. Section D
Run Real Time Sampling
Section E
Edit and Control Sampling charts
Section F
Stop Real Time Sampling
Section G
View Stored Data
Connect the Gateway
A 1. Insert the gateway dongle into the
USB port of your tablet.
If your tablet comes with a USB-C port
only, use the small adapter (included in
the kit) to convert from USB-3 to USB-C.
If your gateway is a dongle version,
connect directly to the computer.
Learn More
Additional resources are available:
• Wireless Egg Node II Multi Node Version User Manual
• Orka’s website www.eggtester.com
• User guides and software (contact us for user name and password)
Operate and Discover Nodes
C 1. Open the node by twisting the upper cover
counterclockwise, then pull the top section up.
2. From the Home screen click on Discover
Wireless Node.
3. Select nodes to be discovered — one or more.
4. While software searches for nodes, turn on the
node to ON by pressing the ON/OFF button
once.
5. The software automatically detects the node
and displays data in the status section.
6. The system is now ready to for sampling.
www.eggtester.com info@orkatech.com