Professional Documents
Culture Documents
Universal Laser Cutter Quick Users Guide
Universal Laser Cutter Quick Users Guide
Universal Laser Cutter Quick Users Guide
Step 2. Insert plastic sheet to the machine . Check the user interface . Unclick the toggle clamp
then insert the “wrench” to remove the sheet clamp.
Step 3. Pull the handle bar to raise and the plastic sheet and place the 3D model at the bottom
platen
Step 4. Start the machine . Set the required time countdown and heat standard to soften the
plastic
Step 5. Pull down the handle bar when the vacuum on and hold until the vacuum turned off.
Step 2. Make sure that the size of the canvass is the same size of the art board.
Step 4. Make sure that the color is red is for cutting and black is for engraving
Step 5. Click CTRL + P on adobe illustrator. Then select VL56.60 as printer.
Step 6. Before printing make sure that the capable is connected to the laser printer.
Step 7: Open UCP ( Universal Laser System Control Panel ) Software Press POWER BUTTON.
Step 8. Identify the type of the materials. Use callipers for measuring the thickness
Step 10. Input the materials thickness afterwards. And then click OKAY
Step 11. Select Manual Control and adjust parameters of CUT (red) and ENGRAVE( black) as
desired
Step 12. You can change the speed /power of the laser cutting
Step 14. Set the origin x and y by using focus view tool. Select desired point or origin
Step 17. Close ULS Cover then click Star / Play button to start the operation.