Professional Documents
Culture Documents
Indirect Control of Double Acting Cylinder
Indirect Control of Double Acting Cylinder
Indirect Control of Double Acting Cylinder
Exercise 1B
Objectives:
The problem:
A double acting cylinder is to extend when a pushbutton is operated. Upon release of the
pushbutton the cylinder is to retract. The cylinder is of small bore (25 mm diameter)
requiring a small flow rate to operate at the correct speed.
Set-up diagram
Draw the pneumatic circuit diagram for the problem. Designate the components and
indicate the numbering system for the valve ports.
PNEUMATICS CIRCUIT DIAGRAM:
Indirect Control Circuit:
Pressing the button on the valve A actuates valve B and causes the cylindrical shaft to extend
indirectly. (Fig. 1)
The cylindrical shaft then retracts upon releasing the button from valve A. (Fig. 2)