This document summarizes the analysis of one-way slab conditions with triangular loading for internal and external walls. For the internal wall, the bending moment at the fixed end is negative and at midspan is positive. The required steel reinforcement is 719 sq mm and 839 sq mm. For the external wall, the bending moment at the fixed end is negative and at midspan is positive. The required steel reinforcement is 620 sq mm and 723 sq mm.
This document summarizes the analysis of one-way slab conditions with triangular loading for internal and external walls. For the internal wall, the bending moment at the fixed end is negative and at midspan is positive. The required steel reinforcement is 719 sq mm and 839 sq mm. For the external wall, the bending moment at the fixed end is negative and at midspan is positive. The required steel reinforcement is 620 sq mm and 723 sq mm.
This document summarizes the analysis of one-way slab conditions with triangular loading for internal and external walls. For the internal wall, the bending moment at the fixed end is negative and at midspan is positive. The required steel reinforcement is 719 sq mm and 839 sq mm. For the external wall, the bending moment at the fixed end is negative and at midspan is positive. The required steel reinforcement is 620 sq mm and 723 sq mm.
This document summarizes the analysis of one-way slab conditions with triangular loading for internal and external walls. For the internal wall, the bending moment at the fixed end is negative and at midspan is positive. The required steel reinforcement is 719 sq mm and 839 sq mm. For the external wall, the bending moment at the fixed end is negative and at midspan is positive. The required steel reinforcement is 620 sq mm and 723 sq mm.
One way slab condition was done with proped cantilever with concentric load (CG of triangle load)
and found BM at fixed (negitive) end and mid span (Positive)
ONE WAY SLAB LOAD WITH TRIANGULAR LOADING Internal Wall Internal_LongWalls-X Direction Geomentry: Height of wall 2.55 m Lenght of wall Ly 7.5 m Width of wall Lx 2.55 m Aspect Ratio Ly/Lx 2.94 Condition Oneway Water_Pressure 25.5 kN/Sq.m Force @CG from Base 2/3.H 43.35 kN per 1m runnig length Analysis: Assume_D 275 intenal wall From_fixed_side a 1.7 m P Away_fixed_side b 0.85 m Total_height Lx 2.55 m Force_kN P 43.35 kN a b vertical near end 16.38 kN-m Negitive vertical Point end 19.1 kN-m Positive Nocrack 22.69 kN-m Ast.+x 719.22 Sq.mm #12_dia_spacing 157 Ast.-x 839.09 Sq.mm #12_dia_ spacing 135 Min Ast 330 Sq.mm #10_dia_spacing 238
ONE WAY SLAB LOAD WITH TRIANGULAR LOADING
External wall External_LongWalls-X Direction Geomentry: Height of wall 2.55 m Lenght of wall Ly 7.5 m Width of wall Lx 2.55 m Aspect Ratio Ly/Lx 2.94 Condition Oneway Earth_Pressure 17 kN/Sq.m Force @CG from Base 2/3.H 28.9 kN per 1m running lenght Analysis: D 225 external wall From_fixed_side a 1.7 m p Away_fixed_side b 0.85 m Total_height Lx 2.55 m Force_kN P 28.9 kN a b vertical near end 10.92 kN-m Negitive vertical Point end 12.7 kN-m Positive Nocrack 15.19 kN-m SAFE Ast.+x 620.50 Sq.mm #12_dia_spacing 182 Ast.-x 723.92 Sq.mm #12_dia_spacing 156 Min Ast 330 #10_dia_spacing 238