Professional Documents
Culture Documents
504wc2e W6 1PC PDF
504wc2e W6 1PC PDF
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 1 OF 9
Features:
◇ Popular T-1 3/4 diameter package.
◇ Bulk ,Available on tape and reel.
◇ Viewing angle=15°.
◇ High efficiency.
◇ Reliable and robust.
◇ Emission color: X=0.43, y=0.40.
◇ Industrial standard footprint.
◇ The product itself will remain within RoHS compliant version.
Descriptions:
◇ The series is specially designed for applications requiring higher brightness.
◇ The white LED which was fabricated using a blue LED and a phosphor,and the
phosphor is excited by blue light and emits yellow fluorescence.the mixture of blue
light and yellow light results in white emission.
◇ Utilizing advanced InGaN chip technology.
Applications:
◇ QA equipment.
◇ Backlighting of LCD.
◇ Automotive equipment.
◇ Replacement of conventional Light bulbs and fluorescent lamps.
◇ Indoor and out door displays, etc.
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 2 OF 9
Package Dimension:
5.85 [0.230]
5 [0.197]
Polarity
5 [0.197]
R2.45
1 [0.039]
8.65 [0.341]
0.6 [0.024]
26.00[1.024] Min ±1
0.5 [0.020]
1[0.039]Min ±1
CATHODE
0.5 [0.020]
ANODE
2.54 [0.100]
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25mm (.010″) unless otherwise noted.
3. Protruded resin under flange is 1.00mm (.039″) max.
4. Specifications are subject to change without notice.
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 3 OF 9
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max. Unit
Power Dissipation PD 95 mW
Forward Current IF 25 mA
Reverse Voltage VR 5 V
Notes:
1. Luminous Intensity Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. It use many parameters that correspond to the CIE 1931 2°. X, Y, and Z are CIE 1931 2°
values of Red, Green and Blue content of the measurement.
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 4 OF 9
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
100 50
30
50
20
25
10
0
300 400 500 600 700 800 0
2.6 2.8 3.0 3.2 3.4 3.6 3.8
Wavelength λ p (nm) Forward Voltage VF (V)
100 100
10 10
1 1 0 1 2 3
-60 -40 -20 0 20 40 60 80 100 10 10 10 10
Ambient Temperature Ta (℃ ) Forward Current IF (mA)
o
30
40
o
30 40
25 1.0 o
20 50
0.9 o
60
0.8 o
10 70
o
80o
0 0.7 90
0 20 40 60 80 100 0.5 0.3 0.1 0 0.2 0.4 0.6
Ambient Temperature Ta (℃ )
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 5 OF 9
Warm White CIE 1931 Chromaticity Diagram:
0.50
0.49
0.48
0.47
0.46
0.45 2300K
2500K 2400K
2700K 2600K
0.44 2810K
3060K 2930K J1-4
3200K J1-1 J1-2 J1-3
0.43 I1-4
3400K I1-3
0.42 3600K I1-1 I1-2 J2-3 J2-4
3800K H1-4 J2-1 J2-2
I2-4
0.41 4000K H1-3 I2-2 I2-3
I2-1 J3-3 J3-4
4200K H1-2 H2-4 J3-1 J3-2
0.40 H1-1 I3-4
4400K H2-3 I3-3
G1-5 H2-2 I3-1 I3-2 J4-5
0.39 4600K G1-4 H2-1 H3-4 J4-2 J4-3
4800K I4-4 J4-1
0.38 G1-3 G2-5 H3-3 I4-3
5000K H3-2 I4-2
G1-2 G2-4 I4-1
5300K H3-1 H4-4
0.37 G1-1 G2-3 G3-5 H4-3
5600K F1-3 G2-2 H4-2
0.36 F1-2 G2-1 G3-4 H4-1
6000K F2-3 G3-3 G4-5
0.35 G3-2
6500K F1-1 G3-1 G4-4
F2-2 G4-3
0.34 7000K E1-2 F2-1 F3-3 G4-2
F3-2 G4-1
7600K E1-1 E2-2 F4-3
0.33 F3-1
8200K D1-3 E2-1 F4-2
Y 0.32
9000K
D1-2 D2-3
E3-1
E3-2 F4-1
E4-2
0.31 10500K D1-1 D2-2 D3-3
E4-1
0.30 C1-3 D2-1 D3-2 D4-3
12000K
C1-2 C2-3 D3-1 D4-2
0.29 C3-3 D4-1
14000K C1-1 C2-2
0.28
C2-1 C3-2 C4-3
17000K B1-3 C3-1 C4-2
0.27 B2-3 C4-1
0.26 20000K B1-2 B3-3
B2-2 B4-3
0.25 B3-2
25000K B1-1 B4-2
B2-1B3-1
0.24
30000K A1-3 B4-1
A2-3 A3-3
0.23 A4-3
45000K A1-2
A2-2 A3-2
0.22 A4-2
70000K A1-1 A2-1 A3-1
0.21 A4-1
0.20
0.19
0.18
0.17
0.16
0.15
0.18 0.19 0.20 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.50 0.51 0.52 0.53
W6:
0.48
0.47
0.46
0.45
2400K 2300K
2700K 2600K 2500K
0.44 2810K
3060K 2930K
3200K J1-2 J1-3 J1-4
0.43 I1-4 J1-1
3400K I1-3
I1-2
0.42 3600K I1-1 J2-3 J2-4
J2-2
3800K H1-4 J2-1
I2-4
0.41 I2-3
Y 4000K H1-3
I2-1
I2-2 J3-4
H1-2 J3-1 J3-2 J3-3
0.40 H2-4
H1-1
H2-3 I3-3 I3-4
I3-2
0.39 H2-2 I3-1 J4-4
J4-2 J4-3
H3-4 J4-1
H2-1 I4-4
0.38 H3-3 I4-3
I4-2
H3-2 I4-1
0.37 H3-1 H4-4
H4-3
H4-2
0.36 H4-1
0.35
0.34
0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.50 0.51 0.52
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 6 OF 9
Chromaticity Coordinates Specifications for Bin Rank:
Bin Right Right Top Top Left Left Bottom Bottom
Code x y x y x y x y
Notes:
1. Color coordinates measurement allowance is ± 0.01.
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 7 OF 9
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
1) Test Items and Results:
Standard Number of
Test Item Test Conditions Note
Test Method Damaged
Tsld=260±5℃, 10sec 4mm
Resistance to Soldering JEITA ED-4701
from the base of the epoxy 1 time 0/100
Heat 300 302
bulb
JEITA ED-4701 Tsld=235±5℃, 5sec(using 1time
Solder ability 0/100
300 303 flux) over 95%
JEITA ED-4701
Thermal Shock 0℃~100℃ 15sec, 15sec 100 cycles 0/100
300 307
JEITA ED-4701 -40℃~25℃~100℃~25℃
Temperature Cycle 100 cycles 0/100
100 105 30min,5min,30min,5min
Moisture Resistance JEITA ED-4701 25℃~65℃~-10℃ 90%RH
10 cycles 0/100
Cycle 200 203 24hrs/1cycle
High Temperature JEITA ED-4701
Ta=100℃ 1000hrs 0/100
Storage 200 201
Terminal Strength JEITA ED-4701 Load 10N (1kgf) No noticeable
0/100
(Pull test) 400 401 10±1sec damage
Terminal Strength JEITA ED-4701 Load 5N (0.5kgf) No noticeable
0/100
(bending test) 400 401 0°~90°~0° bend 2 times damage
Temperature Humidity JEITA ED-4701
Ta=60℃, RH=90% 1000hrs 0/100
Storage 100 103
Low Temperature JEITA ED-4701
Ta=-40℃ 1000hrs 0/100
Storage 200 202
Steady State Operating
Ta=25℃, IF=30mA 1000hrs 0/100
Life
Steady State Operating
Ta=60℃, RH=90%,
Life of High Humidity 500hrs 0/100
IF=30mA
Heat
Steady State Operating
Ta=-30℃, IF=30mA 1000hrs 0/100
Life of Low Temperature
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 8 OF 9
Please read the following notes before using the product:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current
change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 80%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the
time of the hand solder.
4. Soldering
When soldering, for Lamp without stopper type and must be leave a minimum of 3mm clearance
from the base of the lens to the soldering point.
To avoided the Epoxy climb up on lead frame and was impact to non-soldering problem, dipping
the lens into the solder must be avoided.
Do not apply any external stress to the lead frame during soldering while the LED is at high
temperature.
Recommended soldering conditions:
Soldering Iron Wave Soldering
Temperature 300℃ Max. Pre-heat 100℃ Max.
Soldering Time 3 sec. Max. Pre-heat Time 60 sec. Max.
(one time only) Solder Wave 260℃ Max.
Soldering Time 5 sec. Max.
Note: Excessive soldering temperature and / or time might result in deformation of the LED lens or catastrophic
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used. It should be confirmed beforehand whether the
characteristics of the LEDs will or will not be damaged by repairing.
6. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or
anti-electrostatic glove when handling the LED. All devices equipment and machinery must be
properly grounded.
Spec No.: B508 X335 Rev No.: V.3 Date: May./28/2008 Page: 9 OF 9