Professional Documents
Culture Documents
g0621x PL
g0621x PL
We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown
are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability.
Main
2 1
3 46 47 48 49 50
6
7
4
9 5V2
51
11 8
10
13 26 29 52
12 53 54 58
15 27
14 55
57 49 56 59
17
16 28
19
18 75 77 60
61 63
21 78
20 34 30
22 32 76
31 64
79 33
24 81
23 65
66 62
45 62
44
64-1
61 67
43 16 64-2
60
41 42
25 68
69 64-4 64-3
80 73 70 35
71
39 70 72 33
16
19 17
74 38
4
37
36
165
140
141-1
137
141 141-2
157
147 141-3
159
164 141-4
163 156
155 141-5
202
203
204
205
215
214
202
206
207
206
210
202
212 211 208
213 209
301
302 309
303
310
303
304
311
305 312
313
314
402
VARIABLE SPEED
G0621X
WOOD & METAL CUTTING BANDSAW
Specifications
Power Supply: 220V, 1-Phase, 15A To reduce risk of serious injury when using this machine:
Motor: 1-1/4 HP, 220V, 3-Phase, 4.8A 1. Read & understand owner’s manual before operating.
Full Load Current (w/VFD): 13A 2. Never touch moving blade & keep hands out of blade path.
Table Size: 16" x 20" 3. Always wear approved eye protection and respirator.
Blade Speeds: 150–3000 FPM 4. Only remove jammed cutoff pieces when blade is stopped.
Blade Length: 108" 5. Use push stick or holding jig to cut small or narrow pieces.
Blade Width Range: 1/8" – 1" 6. Turn motor OFF and disconnect power before changing
Max. Cutting Width Left of Blade: 13-1/2" blades, making adjustments, or servicing.
Max. Cutting Height: 10" 7. Maintain adjustment of blade tension, tracking, & guides.
Table Tilt: 5˚L ⁄ 45˚R 8. Keep upper guide adjusted to just clear the workpiece.
9. Hold workpiece firmly against table to maintain control.
404
Weight: 261 lbs.
10. Only run saw with wheel covers closed & all guards in place.
11. Never reach under table while blade is in motion.
Date
12. Secure/remove loose clothing and long hair.
13. DO NOT expose to rain, moisture or wet locations.
SN
14. Prevent unauthorized use by children or untrained users;
Mfd. for Grizzly in Taiwan restrict access or disable machine when unattended. BLADE TENSION
SCALE
405 1"
11⁄4"
3
⁄4"
1
⁄2" 1 3
⁄8"
⁄4"
0" 0"
413
installed blade width.
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
READ and UNDERSTAND
408
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
ON
403
to www.grizzly.com or
call (800) 523-4777.
WARNING!
INJURY HAZARD
OFF Keep door closed
while blade is in
motion. Disconnect
power before
DO NOT remove this plate. opening door.
407
410 MATERIAL
Wood
Aluminum
TPI
6 – 10
6 – 14
SPEED (FPM)
2200 +
220 – 534
414
Copper Pipe 14 – 22 390 – 990
Copper Plate 12 – 22 390 – 590
Copper Cast 6 – 12 195 – 390
Steel 18 – 24 150 – 200
Cast Iron 16 – 24 150 – 200
NOTICE
411
Thick workpieces cut best with a
412
slower speed and fewer TPI.
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.