Agco Gearbox ST10F269 Xrom Fendt PDF

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

NT_AGCO_GEARBOX_ST10F269_XROM_FENDT VER 02.

00

PLUGIN 366: NEW TRASDATA

Dimensione Sport s.r.l - 15020 Gabiano (AL) - ITALY - Tel. +39 0142 955 201 – WEB : www.dimsport.com -1-
NT_AGCO_GEARBOX_ST10F269_XROM_FENDT VER 02.00

Dimensione Sport s.r.l - 15020 Gabiano (AL) - ITALY - Tel. +39 0142 955 201 – WEB : www.dimsport.com -2-
NT_AGCO_GEARBOX_ST10F269_XROM_FENDT VER 02.00

ECU CONNECTOR
In order to connect to the ECU use the CABLE F32GN037C.
Make sure that the POWER led (red) on NEW TRASDATA is ON.

To power the ECU it is possible to use the VKEY wirings too, both red and orange wires are 12V.

Dimensione Sport s.r.l - 15020 Gabiano (AL) - ITALY - Tel. +39 0142 955 201 – WEB : www.dimsport.com -3-
NT_AGCO_GEARBOX_ST10F269_XROM_FENDT VER 02.00

BOOT CONNECTION

Connect the GREY wire of the F32GN037C cable as shown here below:

RX & TX CONNECTION

To connect the RX & TX communication lines use the F34NTF53 FLAT wiring

Dimensione Sport s.r.l - 15020 Gabiano (AL) - ITALY - Tel. +39 0142 955 201 – WEB : www.dimsport.com -4-
NT_AGCO_GEARBOX_ST10F269_XROM_FENDT VER 02.00

Dimensione Sport s.r.l - 15020 Gabiano (AL) - ITALY - Tel. +39 0142 955 201 – WEB : www.dimsport.com -5-

You might also like