TeknPlus is a solvent-free polyurethane hybrid material that provides corrosion protection and waterproofing for concrete, steel, and other substrates. It can be applied in thicknesses of 1-5 mm in a single application by spray machine. It is not affected by high humidity or low temperatures. TeknPlus is recommended for use in water retaining structures, tanks, sewerage tanks, marine environments, culverts, tunnels, and industrial structures due to its chemical and abrasion resistance.
TeknPlus is a solvent-free polyurethane hybrid material that provides corrosion protection and waterproofing for concrete, steel, and other substrates. It can be applied in thicknesses of 1-5 mm in a single application by spray machine. It is not affected by high humidity or low temperatures. TeknPlus is recommended for use in water retaining structures, tanks, sewerage tanks, marine environments, culverts, tunnels, and industrial structures due to its chemical and abrasion resistance.
TeknPlus is a solvent-free polyurethane hybrid material that provides corrosion protection and waterproofing for concrete, steel, and other substrates. It can be applied in thicknesses of 1-5 mm in a single application by spray machine. It is not affected by high humidity or low temperatures. TeknPlus is recommended for use in water retaining structures, tanks, sewerage tanks, marine environments, culverts, tunnels, and industrial structures due to its chemical and abrasion resistance.
TEKNPLUS Solvent Free Polyurethane Hybrid material
Description:
TeknPlus is a Solvent free Polyurethane Polyurea hybrid material with excellent
protective properties used for corrosion protection and water proofing of concrete, steel and other substrates.
Features and Benefits :
o Rapid application by spray machines.
o Not affected by high Humidity. o Not affected by low temperature. o It can be applied from 1 mm to 5 mm thick in single application depending on skill of applicators.
Uses and Application:
o Protection where chemical and abrasion resistance is required.
o Suitable for water retaining structures and tanks. o Protection on concrete and steel in sewerage tanks and aggressive environments. o Recommended for structures in marine area subject to chloride and sulphate attack. o For culverts and tunnels. o For light and heavy industrial structure. o Ideal for effluent and water tanks.
Packing and Coverage:
o Available in 200 Kg Drums.
Thickness build up normally 1mm per kg per square meter up to 5 mm thickness can be built up with single spray.
Technical data:
Colors : Grey, blue
Solid Content : 100 % Specific Gravity : Part A 1.10, Part B 1.02 Viscosity A Component @25 0C (cps) : 1800 Viscosity B Component @25 0C (cps) : 185 Mix Ratio : Part A: Part B 1:1 Gel time : 7 to 10 secs. Tack free time : 20 to 30 secs. Full cure : 1 hour Elongation (DIN 53504) : 250 - 520 % Shore hardness (DIN 53505) : 80 - 88 A