Professional Documents
Culture Documents
3 MM 2 MM: Visit Us At: WWW - Nodia.co - in
3 MM 2 MM: Visit Us At: WWW - Nodia.co - in
com
MCQ 10.115 Gray cast iron blocks 200 # 100 # 10 mm are to be cast in sand moulds.
Shrinkage allowance for pattern making is 1%. The ratio of the volume of
pattern to that of the casting will be
(A) 0.97 (B) 0.99
(C) 1.01 (D) 1.03
MCQ 10.116 In a 2-D CAD package, clockwise circular arc of radius 5, specified from
P1 (15, 10) to P2 (10, 15) will have its centre at
(A) (10, 10) (B) (15, 10)
(C) (15, 15) (D) (10, 15)
MCQ 10.117 In an orthogonal cutting test on mild steel, the following data were obtained
Cutting speed : 40 m/min
Depth of cut : 0.3 mm
Tool rake angle : + 5c
Chip thickness : 1.5 mm
Cutting force : 900 N
Thrust force : 450 N
Using Merchant’s analysis, the friction angle during the machining will be
(A) 26.6c (B) 31.5c
(C) 45c (D) 63.4c