Professional Documents
Culture Documents
Ceti Bilingue Ngueuga Electrical Electronic Maintenance Form 7 Second Sequence Test
Ceti Bilingue Ngueuga Electrical Electronic Maintenance Form 7 Second Sequence Test
I.1) what is the function of the lighting system on the mobile vehicle? (1.5mrk)
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
I.2) Draw a simplified circuit of a lighting system showing the side- and headlight bulbs, light
I.3) the figure below represent an ordinary tungsten bulb used on the lighting system.
I.3.1) Enumerate the part of this bulb? (8×0.25mrk)
2 6
3 7
4 8
……………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………...
I.3.4) the disadvantage of the ordinary tungsten bulb, pushed manufacturer to produced the
tungsten halogen bulb. Give the advantage brought about by this halogen bulb? (2×1mrks)
……………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………..
I.3.5) Give the operating principle of the halogen bulb. (3mrks)
……………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………….
I.4) with the help of a sketch explain how the high beam and dip of the head lamps are being
obtained. (4mrks)
ref sketch observation
1.3) the life of a filament bulb when used in a vehicle will depend upon two main factors
(2×0.5mrks)
a)_________________________________
b)________________________________
……………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………..
II.4) refer to the fig3 below which shows an electronic ignition system.
Fig3
II.4.1) name and state the functions of the components listed in the table below (3×0.5mrks)
part function
X……………………………………………..
C………………………………………………….
E……………………………………………………
II.4.2) explain why there are missing teeth on the flywheel reluctor ring (1mrk)
……………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………..
II.4.3) descript in each case, how a test lamp could be used to check the;
………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………..
………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………
II.4.4) describe one electrical test which can be used to check the serviceability of the pulse
generator (1mrk)
……………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………….
EXERCISE III: SIGNALISATION
B
A C
1)…………………………………………………………………………………………………………………………………..
2)…………………………………………………………………………………………………………………………………..
3)……………………………………………………………………………………………………………………………………
I.2) for each of the figures realize the connection of the elements so that the lamp can light.
(3mrks)