Professional Documents
Culture Documents
Engineering Graphics Labs
Engineering Graphics Labs
Course Objectives: This course will provide students concepts on the drawings of different curves like straight line, parabola, ellipse etc. After
completion of this course, students will be able read and interpret engineering drawings and will be capable of using various instruments involved in
drawings
Course Contents/Syllabus:
Weightage (%)
Module I: LETTERING, DIMENSIONING & GEOMETRICAL CONSTRUCTION
Descriptors/Topics
Introduction to engineering drawing; Importance of Engineering drawing; Instruments used in drawing; 15
Standards for letter writing; What is dimensioning, types of dimensioning; Basics terms used for dimensioning;
Construction of basic geometrical figures like pentagon, hexagon, conic sections by different methods
[Type text]
Department of Mechanical Engineering, Amity School of Engineering Technology
Amity University Uttar Pradesh
Module II: SCALES
Descriptors/Topics
What is scale; Importance of Scale; Basic Requirements for scale: Representative fraction, Length of scale; Types of 15
Scales; Construction of plain scale, diagonal scale and scale of chord.
Development of Surfaces : Drawing developments of different solids by parallel line and radial line development
method.
Module VI: ISOMETRIC PROJECTION & AUTO-CAD
15
Descriptors/Topics
Isometric scale; Isometric axes; Isometric views and projections of plane figures and solids by box method.
Computer Aided Drafting (CAD): Introduction, benefit, software's basic commands of drafting entities like line, circle,
polygon, polyhedron, cylinders. Transformations and editing commands like move, rotate, mirror, array. Solution of
[Type text]
Department of Mechanical Engineering, Amity School of Engineering Technology
Amity University Uttar Pradesh
[Type text]
Department of Mechanical Engineering, Amity School of Engineering Technology
Amity University Uttar Pradesh
The course pedagogy will include E- tutorial, E- content, E- discussion and E- assessment, lectures, concept quizzes, tutorials, lectures, problem solving
on drawing sheets in classroom and drawing assignments. It also includes application of software knowledge to understand the concept of drawings in
projection.
Sheet 1 - Lettering
Single stroke, vertical and inclined capital letters, numerals, types of conventional lines, types of dimensioning
Construction of basic geometrical figures like pentagon, hexagon, ellipse by different methods.
Sheet 5- Scales
Orthographic projection of lines in 1st angle. Problems based on finding true length and short length when line is inclined to both planes.
Orthographic projection of planes like pentagon, hexagon, circle, rectangle etc. in 1st angle.
Orthographic projection of polyhedra and solids of revolution in 1st angle for simple cases (resting on HP & VP)
Orthographic projection of polyhedra and solids of revolution in 1st angle when inclined to one or both reference planes
Drawing sectional views and true shape of section for different solids
Drawing developments of different solids by parallel line and radial line development method.
[Type text]
Department of Mechanical Engineering, Amity School of Engineering Technology
Amity University Uttar Pradesh
Drawing orthographic projection problems on AUTO-CAD
[Type text]
Department of Mechanical Engineering, Amity School of Engineering Technology
Amity University Uttar Pradesh
Bloom’s Level > Knowledge Comprehension Application Analysis Analysis Synthesis Evaluation
Course Learning CLO1 (State CLO2 CLO3(Demonstrat CLO4 CLO5 CLO6 (Design the CLO7 (Evaluate
Outcomes knowledge on (Describe e the proper use of (Experiment (Experiment projections in standards in
the drawing to draw in AUTO-CAD
proficiency to develop engineering
fundamentals of equipment. both First and )
with a metric and/or Third angle drawing practice
engineering
and engineer comprehend orthographic and engineering
drawing and )
scales) a simple projections graphics.)
Assessment units. )
engineering
type/PSDA
drawing)
Assignment
Quiz
Class Test
[Type text]
Department of Mechanical Engineering, Amity School of Engineering Technology
Amity University Uttar Pradesh
Reference Books:
M.B. Shah & B.C. Rana, Engineering Drawing, Pearson Education, 2007, ISBN: 108131710564
N Sidheshwar, Engineering Drawing, Tata McGraw Hill, ISBN : 9780074603376
[Type text]