Professional Documents
Culture Documents
Black II 8 07d738 PDF
Black II 8 07d738 PDF
BLACK II 8 - P. 1
1. OVERVIEW
P. 2 - BLACK II 8
2. CAUNTIONS ON INSTALLATION
BLACK II 8 - P. 3
3. SCHEMATIC DIAGRAM OF EQUIPMENT CONNECTION
P. 4 - BLACK II 8
4. FRONT PANEL FUNCTION
BLACK II 8 - P. 5
1. Mike/line/guitar input jacks of MIC Channel: frequency of 12KHz and the sound below
The jacks are used to connect microphones or 80Hz.
other audio devices in support of cannon plugs 5. FX send knob: Adjust the size of the signal
and 6.5 plugs. sent to the digital effect processor. The signal
2. +48V phantom switch/LED: When this switch transmitting point is located after the volume
is turned on, the +48V LED lights and DC +48 knob of the channel.
V phantom power is supplied to theXLR plug 6. Pan knob: Positions the channel signal
in Mic input jack. NOTICE: Be sure to leave this between L/R in the stereo mix.
switch off if you do not need phantom power. 7. MIC input volume knob/peak LED: Adjust
Follow the important precautions below, in the volume of the sound input from the
order to prevent noise and possible damage to microphone or other source connected
external devices as well as the mixer if you turn to channel. When the peak light flashes,
this switch on. Be sure to leave this switch off indicating that the input signal is too high,
when you connect a device that does not support please turn the volume knob to the left to
phantom power to channel. Make sure to turn reduce the volume. In normal use, please
this switch off when connecting/disconnecting a avoid the peak light for a long time.
cable to/from channel. Slide the knob on channel 8. Th digital effect processo adjust the knob:
to minimum before turning this switch on/off. REP adjust how many time the echo repeats;
3. Guitar/Line input shifter: The switch is used to DEL adjust the time interval between each
shift the connections to different sound sources echo; LEVEL adjust the volume of the effect
of the input channels. Switched up, the input processor.
channel can be connected directly with a high. 9. MP3 audio signal volume knob: Adjust the
impedance audio device such as an electric audio signal level from the MP3 player.
guitar o a bass. Switched down, it can be 10. MAIN output volume knob.
connected to a low-impedance sound device. 11. Phones output volume knob.
WARNING! In operation of the switch, all level 12. The MP3 Player/Recorder controlled
output control (such as channel volume knobs, keyboard.
monitor output knobs and earphone knobs) 13. The MP3 Player/Recorder LCD display.
should be set up to the minimum position. 14. The MP3 Player/Recorder USB port.
Because this operation will cause a sudden 15. Main output level meter.
impact sound, which can damage the external 16. The stereo input channel volume knob.
devices, and the hearing of the personnel on site. 17. The setereo input channel balance knob.
4. Mic input CH2 band EQ: This is a high quality, 18. 6.35mm specification for stereo headphone
sensitive, 2 segment equalizer that adjusts the output inerrupts.
overall tone of the channel. The adjustment 19. Main output jacks: XLR balanced output
wavefrom of the high and low bass equalizer interrupt for the connection of active speakers,
is the shape of the broom, which affects the power amplifiers or other audio devices.
P. 6 - BLACK II 8
20. 6.35mm-spec stereo line input jack. start to play the music automatically. Under the
21. The steeo line input signal sensitivity interface of playing music, shortly press “menu”
slection button, bounce to +4dB, press 10dB. key, a couple of setups under the music mode will
22. DC power supply 5V socket. pop up.
23. Power switch. a. Circulation mode: There are multiple modes
24. BT/MP3 player/recorder operation such as all circulation, single circullation, and
instructions: random play to be chosen.
1. Definition of keys: b. EQ mode: There are a couple of balance modes
a. Shortly press: the previous one/choose upward such as nature, rock, pop and classic modes to be
or left. Long press: reduce the volume. chosen.
b. Shortly press: the next one/choose downwards c. Master disc directory: Do the reading of audio
or right. Long press: increase the volume. files in the file folder, you can choose the music
c. Menu Key. promptly.
d. Play/Pause/Confirm Key. d. Delete the file: Delete the audio file currently
played.
2. System setup: When there is no USB disk
inserted, shortly press any key and enter the main 5. Record Mode: Under the interface of playing
menu items, shortly press the choose key, select music, long press the “menu” key, and enter the
the “system setup” key, press “play confirm key” to recording work mode:
do the system setup. The list is as follows: a. Shortly press “play” key, start the recording or
a. Backlight time: After there is not any operation, the pause the recording.
backlight will turn off automatically after some certain b. Long press “play” key, finish the recording and
time. This slection item is for you to choose the time save the recording file, automatically quit and
you need to turn off. The default is not turn-off. return to the play interface.
b. Language selection: display of two menus with c. Recording file format: MP3/48Khz
Chinese and English. sampling/128Kbs bit rate.
c. Contrast: Adjust the contrast degree of the
display screen, and suit different light environment. 6. Connect the computer: In the main menu,
select and confirm the “Connecting computer”
3. Start the BT connection: When there is no USB item. Use the USB cord to connect with the USB
disk inserted, shortly press any key, and enter the port of the computer. It can be used as the USB
main menu item. Shortly press the selectio key, sound card to play the music.
and select the “BT mode” item. Press the “Play
confirm key” to connect. The bluetooth name of 7. Any setup changes will be stored and
this module is “BT_SPEAKER”. memorized at the time of switch-off.
BLACK II 8 - P. 7
5. SYSTEM BLOCK DIAGRAM
P. 8 - BLACK II 8
tecshow.amproweb.com
BLACK II 8 - P. 9