Professional Documents
Culture Documents
Moyaproof WS2 Datasheet PDF
Moyaproof WS2 Datasheet PDF
MoyaProof WS2
TWO COMPONENT POLYMER MODIFIED SEMI FLEXIBLE CEMENTITIOUS
WATERPROOFING MEMBRANE
DESCRIPTION MoyaProof WS2 is a two component acrylic co-polymer based flexible
cementitious waterproofing slurry coat. It is supplied in ready to use kit.
MoyaProof WS2 provides excellent adhesion, flexibility, and durability.
SURFACE PREPARATION Surface should be clean and sound, free of dust, loose particles, grease, oil,
primers from previous membrane systems or bitumen. Bitumen or primers
should be removed by shotblasting or mechanical means. Spalled concrete
should be repaired by cutting to sound concrete and patching with ReCon GP.
1/2
MIXING MoyaProof WS2 is supplied in premeasured units. Slowly add powder to the
liquid and mix to a lump free smooth consistency. Do not add water or rework
a stiffened mix by adding water. Mix sufficient material to use within 30-40
minutes.
APPLICATION Saturate the concrete surface with clean water. Apply the first coat while the
surface is still damp with no free standing water. Apply using a short stiff
bristle brush or roller at a minimum thickness of 1.0 mm per coat. Leave for
2-6 hours, apply second coat in perpendicular direction to the first coat. The
second coat can be finished by rubbing down with a soft sponge. Spray or
trowel application is acceptable provided the mixing ratio is adjusted to achieve
the right consistency. It is recommended that the application over hollow
blocks or highly porous areas to be coated with minimum 3 coats at total
thickness of 3mm.
CURING MoyaProof WS2 should be protected from high wind & intense sunshine.
Keep moist for 3 - 4 days after application. Protect from wind, heat and rain
until fully cured.
GENERAL INFORMATION Shelf Life 12 months from date of production, if stored properly in
original unopened packing in dry conditions and away from
sunlight and scorching heat.
Packaging Part A + B = 25 kg Set.
Cleaning Clean all equipments and tools with water.
Note Stir Well Before Use.
HEALTH & SAFETY PPE’s Gloves, goggles & mask must be worn
Precautions Contact with skin, eyes, etc. must be avoided, if not
may cause irritation
Hazardous It is regarded as non-hazardous for transportation
Disposal Do not re-use bags & containers. To be disposed off
as per local rules and regulations.
Detail Information Refer MSDS for detailed information.
TECHNICAL SERVICE Conmix Technical services are available on request for on site support to
assist the correct use of it’s products.
Conmix Ltd.
P.O. Box 5936 Sharjah,
United Arab Emirates Sales Office
Tel: +971 (06) 5314155 Tel: +971 (06) 5682422
Fax: +971 (06) 5314332 Fax: +971 (06) 5681442
www.conmix.com Email: conmix@conmix.com
2/2