Professional Documents
Culture Documents
Curriculum Vitae: Education
Curriculum Vitae: Education
T: 03-8946 4413
F: 03-8656 7125
Education
1. Ph.D in Structural Instability, Loughborough University, UK
2. M.Sc. in Aerospace Engineering, Universiti Putra Malaysia
3. B.Eng. (Hons.) in Mechanical Engineering (Aeronautics), Universiti Teknologi Malaysia
Areas of Interest
1. Structural instability of thin-walled metal structural systems
2. Elastic and elasto-plastic post-buckling characteristics of metal structures
3. Lightweight aerospace and automotive structural components
4. Impact mechanics of metal and composite structures
5. Finite element numerical modeling
Appointments
Position Duration
1. Senior Lecturer of Aerospace Structures Jul 2012 to date
2. Department Development Coordinator Aug 16, 2012 – Aug 16, 2015
3. Technical Manager (Aerospace Structure Laboratory) Mac 15, 2013 – Mac 15, 2016
in an accreditation Committee MS ISO/IEC
17025:2005, Faculty of Engineering
4. Signatory in an accreditation Committee MS ISO/IEC Mac 15, 2013 – Mac 15, 2016
17025:2005, Faculty of Engineering
5. Head of Aerospace Structure Laboratory Aug 16, 2012 – Aug 16, 2015
6. Research Associate in Aerospace Manufacturing 2014 to date
Research Centre
Publications
Journals (30 recent journals)
1. N. Yidris, R. Zahari, D.L. Majid, F. Mustapha, M.T.H. Sultan & A.S.M. Rafie, ‘Crush simulation of
woven C-glass/epoxy unmanned ariel vehicle fuselage sections’, International Journal of
Mechanical and Material Engineering, Vol. 5(2) (2010) 260-267
2. Loughlan, J., Yidris, N. & Cunningham, P.R., ‘The influence of post-local buckling mechanics on
the stress variations, axial stiffness and ultimate failure strength of uniformly compressed thin-
walled I-section struts’, Journal of Physics: Conference Series 2009; 181:012031,
doi:10.1088/1742-6596/181/1/012031
3. Loughlan, J., Yidris, N. & Cunningham P.R., ‘The effects of local buckling and material yielding
on the axial stiffness and failure of uniformly compressed I-section and box-section struts’, Thin-
Walled Strustures 49 (2011) 264 – 279
Updated on 26/3/14
4. Loughlan, J., Yidris, N. & Jones K., ‘The failure of thin-walled lipped channel compression
members due to coupled local-distortional interactions and material yielding’, Thin-Walled
Structures 61 (2012) 14 – 21
5. M.T.H. Sultan, A.S.M. Rafie, N. Yidris, F. Mustapha, and D.L. Majid, ‘Damage classification in
CFRP laminates using PCA approach’, Applied Mechanics and Materials, Vol.225 pp189-194
(2012) (ISI Scopus)
6. M.T.H. Sultan, N. Yidris, F. Mustapha, A.S.M. Rafie and D.L. Majid, ‘Damage identification and
classification in CFRP laminates – A SEM based study’, Applied Mechanics and Materials,
Vol.225 , pp138-144 (2012) (ISI Scopus)
7. M.Z. Zainol, F. Mustapha , M.T.H. Sultan , and N. Yidris, ‘Implementation of extreme low power
micro-controller for a wireless structural health monitoring (SHM) system’, Applied Mechanics
and Materials, Vol.225 pp344-349 (2012) (ISI Scopus)
8. X.H. Cheong, A.S.M. Rafie, F.I. Romli, M.T. Hameed Sultan & N. Yidris, ‘A study on the effect of
upstream square blockage of a rotating cylinder’, Applied Mechanics and Materials, Vol. 225 pp.
13-17 (2012) (ISI Scopus)
9. N. Yidris, J. Loughlan, M.T.H. Sultan & A.S.M. Rafie, ‘Failure mechanics of uniformly
compressed thin-walled box-section struts’, Applied Mechanics and Materials, Vol. 225 pp. 172-
177 (2012) (ISI Scopus)
Updated on 26/3/14
12. N. Yidris, F. Mustapha, R. Zahari, M.T.H. Sultan, ‘The influence of loading conditions on the
carrying capacity of thin-walled plain channel columns’, International Conference on Mechanical,
Automotive and Aerospace Engineering 2013, IIUM, Kuala Lumpur, 2-4 July 2013.
13. N. Yidris, M.T.H. Sultan, M.Y. Harmin & A.S.M. Rafie, ‘Local-overall flexural interaction
behaviour of pinned-ended thin-walled I-section columns’, International Conference on Advances
in Mechanical and Manufacturing Engineering 2013, Kuala Lumpur, 25-28 November 2013.
14. S.N.A. Safri, M.T.H. Sultan, N. Razali, S. Basri, N. Yidris & F. Mustapha, ‘The effect of thickness
and bullet type on impact properties of glass fibre reinforced polymer (GFRP) using a single
stage gas gun (SSGG)’, International Conference on Advances in Mechanical and Manufacturing
Engineering 2013, Kuala Lumpur, 25-28 November 2013.
15. N. Razali, M.T.H. Sultan, S.N.A. Safri, S. Basri, N. Yidris & F. Mustapha, ‘High velocity impact
test on glass fibre reinforced polymer (GFRP) using a single stage gas gun (SSGG) – an
experimental based approach’, International Conference on Advances in Mechanical and
Manufacturing Engineering 2013, Kuala Lumpur, 25-28 November 2013.
16. M.T.H. Sultan, S. Basri, A.S.M. Rafie, N. Yidris, F. Mustapha, R. Zahari & M.R. Ajir, ‘Impact
damage analysis for glass reinforced epoxy laminated plates using single stage gas gun
(SSGG)’, International Conference on Advances in Mechanical and Manufacturing Engineering
2013, Kuala Lumpur, 25-28 November 2013.
Research Grants
Amount Source of
No Project Title Year
(RM) Fund
1. The effects of loading conditions on the 50,000 2013- IPM UPM
local/overall failure mechanics of UAV wing spars – 2015
an experimental approach
2. The post-buckled coupled mode interaction 59,000 2013- FRGS
behavior of aircraft aluminium stiffened panels in 2015
compression
Student Supervision
Updated on 26/3/14