Professional Documents
Culture Documents
A New Clutch End Plate and Shaft Assembly Are Now Used For The Reverse Clutch On Certain Motor Graders (3063, 3155, 3170) (M0117883)
A New Clutch End Plate and Shaft Assembly Are Now Used For The Reverse Clutch On Certain Motor Graders (3063, 3155, 3170) (M0117883)
A New Clutch End Plate and Shaft Assembly Are Now Used For The Reverse Clutch On Certain Motor Graders (3063, 3155, 3170) (M0117883)
2020/09/08
Clutch on Certain Motor Graders {3063, 3155, 3170} (M0117883)
Revision History:
Revision Summary of Changes
01 "Note" information added
Table 1
Description Of Change: A new clutch end plate and shaft assembly is now used in
Clutch 3 (Reverse). The end plate was thickened to be more robust and improve clutch
performance, the parts listed below shall be installed together to ensure proper assembly.
Adaptable To:
The following changes are adaptable to the products within the listed serial numbers, and
are effective with all products after the listed serial numbers.
The new 555-1700 Shaft As and 555-1701 End Plate are service replacement for 282-
7842 Shaft As and 165-0367 End Plate.
Note: Proactive replacement of the new shaft assembly and end plate is not required on
machines with no reverse clutch issues.
https://sis2.cat.com/#/detail?tab=3&serialNumber=E9S&infoType=9&serviceMediaNumber=M0117883&serviceIeSystemControlNumber=i08073199
Illustration 1 g06536434
Location of the new clutch and shaft assembly
(1) 555-1700 Shaft As
(2) 555-1701 End Plate
Required Parts
Item Qty New Part Number Part Name Former Part Number
1 1 555-1700 Shaft As 282-7842
2 1 555-1701 End Plate 165-0367
Table 2
PSP-0002C15E
2020/11/26
00:21:22+08:00
i08073199
© 2020 Caterpillar Inc.
Caterpillar:
Confidential Green
https://sis2.cat.com/#/detail?tab=3&serialNumber=E9S&infoType=9&serviceMediaNumber=M0117883&serviceIeSystemControlNumber=i08073199