Professional Documents
Culture Documents
Standard Trunking Systems: Section 1
Standard Trunking Systems: Section 1
SECTION 1
STANDARD
TRUNKING SYSTEMS
Unitrunk Cable Trunking is a complete range of trunking and fittings
manufactured to standards as described in BS EN 50085-1:2005 and is
manufactured throughout in best quality hot dipped galvanised sheet steel
to BS EN 10346:2009 giving maximum protection from corrosion. Standard
Cable Trunking is manufactured and stocked in 3 metre lengths (other lengths
available on request please refer to our code guide at the back of this section).
• The lid incorporates a quick action metal locking device operated by a slotted stud. The slot indicates the
position of the locking bar. - (Note lid is secured using turnbuckle type fastener)
• Each length of Standard Trunking is supplied complete with lid, Coupling, Screws and Nuts.
• Fittings are manufactured from galvanised sheet steel to match the Trunking.
• Bends, Elbows, Tees and Intersection Boxes are complete with integral couplings.
• Special fittings such as OffSets, Risers, Unequal Tees and Bends can be made to order.
1815
Standard
Trunking
STANDARD TRUNKING SYSTEMS
Compartment
Trunking
Multi
Standard Trunking
50mm x 50mm
Trunking
Ref.TK22
Lighting
We stock a considerable range of
Ref.TK33 75mm x 75mm sizes, for our full range of
Ref.TK42 100mm x 50mm dimensions refer to page 31.
Cable Tray
Uniklip
Unitrunk standard trunking is manufactured from pre-galvanised steel and is supplied in 3m lengths.
Other sizes and finishes are available on request (See code guide at the end of this section).
Cable Ladder
Speedway
X
Ref.GTB Ref.GIB
Code W H X Code W H X
22 50 50 86 22 50 50 30 W
33 75 75 115 H 33 75 75 30
42 100 50 137 42 100 50 30
44 100 100 137 44 100 100 30
Cable Basket
X
Systems
66 150 150 190 W 66 150 150 30 X
H
Channel &
Support
Ref.GOB H Code W1 H1 W2 H2 X
33-22 75 75 50 50 152
Code W H X
42-22 100 50 50 50 152 H1
22 50 50 30 W 44-33 100 100 75 75 152
33 75 75 30 66-44 150 150 100 100 152
42 100 50 30 H2
44 100 100 30 X
Trunking
66 150 150 30 W2
Floor
Gusset Tee Gusset Tee
Top Lid Y
Inside Lid
Bench Outlet
& Perimeter
Y
Trunking
Ref.GTT Ref.GIT
Code W H X Y Code W H X Y
22 50 50 30 120 22 50 50 50 150 W
H
33 75 75 30 145 33 75 75 50 175
42 100 50 30 165 42 100 50 50 150 H
Steel Conduit
W X X
66 150 150 30 220 66 150 150 50 250
X X
Solutions
Design
X
X
Ref.GOT Ref.SIE
H
Code W H X Y Code W H X Y
22 50 50 50 150 22 50 50 40 100
33 75 75 50 175 W 33 75 75 40 125 W
42 100 50 50 150 42 100 50 40 95
Accessories
& Supports
27
33 75 75 50 130 W 33 75 75 50 125
Y
42 100 50 50 100 42 100 50 50 155
44 100 100 50 155 44 100 100 50 155 W
66 150 150 50 205 H 66 150 150 50 205
X
X
45° Elbow Y
45° Elbow
Y
Top Lid Inside Lid H
Ref.TE Ref.IE
H
Code W H X Y Code W H X Y
22 22 W
50 50 50 70 50 50 50 70
33 75 75 50 80 33 75 75 50 80
42 100 50 50 90 W 42 100 50 50 70
44 100 100 50 90 X 44 100 100 50 90
X
66 150 150 50 110 66 150 150 50 110
Outside Lid Y
H Top Lid
Ref.OE Ref.STT
Code W H X Y Code W H X Y
H
W
22 50 50 70 50 22 50 50 50 150
33 75 75 80 50 33 75 75 50 175
42 100 50 70 50 X 42 100 50 50 200
W
44 100 100 90 50 44 100 100 50 200
66 150 150 110 50 66 150 150 50 250 X
X
Sharp Tee Y
Sharp Tee
X
Inside Lid Outside Lid H
X
Ref.SIT Ref.SOT
Code W H X Y W Code W H X Y W
22 50 50 50 150 22 50 50 50 150
33 75 75 50 175 33 75 75 50 175
42 100 50 50 150 H 42 100 50 50 150
44 100 100 50 200 X X 44 100 100 50 200 Y
66 150 150 50 250 66 150 150 50 250
28
Product Finishing Key (See page 24)
Standard
Trunking
STANDARD TRUNKING SYSTEMS
Compartment
Trunking
Multi
Adjustable Bends (Vertical) 0-35° Angle Adjustable Bends
VAB/SIZE External lid BAB/SIZE Internal lid (Horizontal) 0-35° Angle
Trunking
Lighting
HAB/SIZE
Cable Tray
Uniklip
Can be formed as an internal or external joint.
Code eg: VAB22 (Adjustable Bend 50x50mm)
Cable Ladder
Speedway
Ref. BE33 75mm x 75mm
Ref. BE42 100mm x 50mm
Ref. BE44 100mm x 100mm
Ref. BE66 150mm x 150mm
Cable Basket
Systems
Socket Outlet Socket Outlet
Single Double
Channel &
Support
X
X
Ref.STL1 Ref.STL2
Code X Y Code X Y
4 230 110 4 230 110
6 230 160 6 230 160
Trunking
off centre cutouts
Floor
Cable Support Trunking Coupling
Ref. CS22 50mm x 50mm
Bench Outlet
Ref. TC22 50mm x 50mm
& Perimeter
Trunking
Ref. CS33 75mm x 75mm Ref. TC33 75mm x 75mm
Ref. CS42 100mm x 50mm Ref. TC42 100mm x 50mm
Ref. CS44 100mm x 100mm Ref. TC44 100mm x 100mm
Ref. CS66 150mm x 150mm Ref. TC66 150mm x 150mm
Steel Conduit
(Class 4)
Solutions
Design
29
Sold in Pairs. Refer to the Trunking sidewall when ordering. (Example TK42 use FC22)
Ref.
Ref. CR2/3
CR2 /350mm x 75mm Ref.HBL(x)
Ref.
Ref. CR4/6
CR4 /6100mm x 150mm Code H W X X
22 85 55 10 20
33 135 85 10 20
H
44 165 115 10 20
66 245 165 10 20
30
Product Finishing Key (See page 24)
Standard
Trunking
STANDARD TRUNKING SYSTEMS
CODE GUIDE
Compartment
Trunking
Multi
STEP 1 : CHOOSE PRODUCT FINISH
Trunking
Lighting
PRE-GALVANISED STAINLESS STEEL 304 POWDER COATED
Cable Tray
CODE PRODUCT NAME
Uniklip
WIDTH HEIGHT CODE X1 X2 X3 X4
TK Trunking (3m lengths) 50 50 22
GSL Galvanised Steel Lid (Width Only) 75 50 32
TC Trunking Coupling 75 75 33
Cable Ladder
100 50 42
Speedway
DF Dividing Fillet (loose) (Height Only)
100 75 43
GTB Gusset Bend (Top Lid)
100 100 44
GIB Gusset Bend (Inside Lid)
150 50 62
GOB Gusset Bend (Outside Lid) 150 75 63
Cable Basket
STE Sharp Elbow (Top Lid)
Systems
150 100 64
SIE Sharp Elbow (Inside Lid) 150 150 66
SOE Sharp Elbow (Outside Lid) 200 50 82
GTT Gusset Tee (Top lid) 200 75 83
200 100 84
Channel &
GIT Gusset Tee (Inside Lid)
Support
200 150 86
GOT Gusset Tee (Outside Lid)
200 200 88
STT Sharp Tee (Top Lid)
225 50 92
SIT Sharp Tee (Inside Lid) 225 75 93
SOT Sharp Tee (Outside Lid)
Trunking
225 100 94
Floor
ITB Intersection Box 225 150 96
TE 45° Elbow (Top Lid) 225 225 99
IE 45° Elbow (Inside Lid) 300 50 12X2
Bench Outlet
300 75 12X3
& Perimeter
OE 45° Elbow (Outside Lid)
Trunking
300 100 12X4
RE Reducer
300 150 12X6
FF Flared Flange
300 200 12X8
BE Blank End 300 225 12X9
Steel Conduit