Professional Documents
Culture Documents
Parex PRC 1
Parex PRC 1
Parex PRC 1
COAT
PRC-1
P L A S T E R I N G A N D R E N D E R I N G
CHARACTERISTICS
Ready to use
Good adhesion
Durable
APPLICATION STANDARDS
BS 5262;1991, BS 5492;1990, BS 4551; Part 2; 1998,
ASTM C150, ASTM C926, ASTM C897
Associated finishes
• All kinds of cement-based mortars or plaster, like the
PAREX PLASTER PP-1 and PAREXBRIC.
“The information provided in this document results from our knowledge of the product and our experience. On-site results may vary, in particular according to the product application
methods adopted. Where application methods not covered by this document are used, customers must request additional information and /or carry out a representative test before using
the products. The above- mentioned information in no way constitutes a warranty relative to the use of the products. Our general terms and conditions of sale shall prevail, in any event, on
the information provided in this document. Prior to application, customers and users are requested to check that they have the latest version of this document”
PAREX, PO Box 40508, Street N° 200, Zone 81, New Industrial Area, Doha, Qatar.
Tel: +974 44385111 Fax: +974 44604188 E-mail: infos.qatar@parex-group.com, www.parexgroupqatar.com
manufactured by Parex Doha Qatar