Professional Documents
Culture Documents
Working Principle: Contact Free Conveyor Belt Skirting
Working Principle: Contact Free Conveyor Belt Skirting
flowing any dust and fine particles back in to the ScrapeTec Trading GmbH
Rheinberger Str. 157
product flow. 47475 Kamp-Lintfort, Germany
airflow airflow
INSTALLATION • Continuous skirting with no gaps
running belt
direction AirScrape is installed, using spacers, floating the blades several
right
left
mm free above the belt and is attached to the outside of the chute
airflow airflow
by utilising existing skirt clamps or a simple bolt and nut system.
It is longitudinally and laterally adjustable to follow the contours of
conveyor belt rollers and belt trough angle.
DUST EMISSION PREVENTION SYSTEM
FILTER CLOTH
ARMS
AIRSCRAPE
SUPPORT SKIRT
STAINLESS STEEL
ARCHES CURTAIN
Installed above the conveyor belt, the filtering cloth retains dust par-
ticles created by conveyed material, while remaining permeable to
circulating air. The filter cloth is specifically designed to retain dust
particles and is durable, maintenance-, contact- and energy-free. It
DUST EMISSION PREVENTION is easy to install and can be manufactured to any size.
SYSTEM The special self-cleaning and dust releasing properties of the filter
cloth enables it to continuously operate for a long time. DustScrape
retains the dust on the conveyor belt and effectively prevents it from
being blown into the surrounding environment. Depending on the
application, the filter cloth can be supplied in different quality i.e.
antistatic properties. Installed at regular intervals, rubber dust cur-
tains contribute to eliminating further dust development.
The combination of this unique dust filter system and AirScrape re- ScrapeTec Trading GmbH
sults in „DustScrape“, a highly effective compact, light-weight, low Rheinberger Str. 157
cost and energy-free dust emission prevention system. 47475 Kamp-Lintfort, Germany
DustScrape is a combination of AirScrape (contact free skirting sys- DustScrape consist of a unique filter cloth, two support skirts, three • Long lasting dust retention due to its self-cleaning
tem) and a unique filter cloth which is manufactured in 2-meter-long arches to support the filter cloth, six arms to hold the system above and dust releasing properties
sections. It is available for any conveyor belt width and can be exten- the belt and a rubber curtain, all sized to requirement. Using bolts
ded to any length. Selecting the correct AirScrape size depends on and nuts, AirScrape is fitted to the lateral support skirts and arms. • Effectively prevents material from being blown
the loading width of the conveyor belt and the required load-free zone The arches are then inserted while the assemble rest on the conveyor away
of the belt edges. Above this load-free zone, the AirScrape system is belt. The construction is now attached to the conveyor using the arms
installed and generates the air intake from outside into the system. and custom build legs. The whole assemble can then be lifted up • Product loss prevention
The generated airflow above the conveyed material then gets filtrated using the slotted holes on the arms, to such a height as the AirScrape
through filter cloth, retaining any dust particles and redepositing this hovers freely above the conveyor belt. The final step is to attach the • Works best with AirScrape
back into the material flow. filter cloth to the system.
MODULAR - 2 m + + + + +