This document outlines the job safety analysis for pin brazing. It identifies hazards such as use of hand and power tools during grinding operations. Controls include marking work areas, using safety signs, conducting toolbox talks, requiring permits to work, clearing non-essential personnel, using only competent workers, and wearing appropriate PPE like gloves and grinding helmets. Tools must be checked before use and all ignition sources eliminated from pipes before starting work. The JSA was approved and signed.
This document outlines the job safety analysis for pin brazing. It identifies hazards such as use of hand and power tools during grinding operations. Controls include marking work areas, using safety signs, conducting toolbox talks, requiring permits to work, clearing non-essential personnel, using only competent workers, and wearing appropriate PPE like gloves and grinding helmets. Tools must be checked before use and all ignition sources eliminated from pipes before starting work. The JSA was approved and signed.
This document outlines the job safety analysis for pin brazing. It identifies hazards such as use of hand and power tools during grinding operations. Controls include marking work areas, using safety signs, conducting toolbox talks, requiring permits to work, clearing non-essential personnel, using only competent workers, and wearing appropriate PPE like gloves and grinding helmets. Tools must be checked before use and all ignition sources eliminated from pipes before starting work. The JSA was approved and signed.
This document outlines the job safety analysis for pin brazing. It identifies hazards such as use of hand and power tools during grinding operations. Controls include marking work areas, using safety signs, conducting toolbox talks, requiring permits to work, clearing non-essential personnel, using only competent workers, and wearing appropriate PPE like gloves and grinding helmets. Tools must be checked before use and all ignition sources eliminated from pipes before starting work. The JSA was approved and signed.
Document Control #: FO-JSA-012 Revision Date: 17/07/2017
Task: Pin Brazing Issuer: Ghaith YOUNSI
Description Hazard Control
Marking of the working area at least 1 meter from the edge of the trench , Safety signs will be displayed for this operation, Tool box talk will be given by the HSSE supervisor to the worker at site, Permit to work signed and completed by the HSSE supervisor Persons not involved in this operation will be cleared Only competent persons will be involved in this - Use of hand and power Grinding opération operationSeul le personnel compétent effectue cette tool opération, Wear appropriate PPE, Wear specific gloves for grinding , Wear the grinding helmet , Check the good condition of hand and power tools prior to start the work, Eliminate all sources of ignition on the pipe prior to the start the operation.