Professional Documents
Culture Documents
MOC3010M, MOC3011M, MOC3012M, MOC3020M, MOC3021M, MOC3022M, MOC3023M 6-Pin DIP Random-Phase Optoisolators Triac Driver Output (250/400 Volt Peak)
MOC3010M, MOC3011M, MOC3012M, MOC3020M, MOC3021M, MOC3022M, MOC3023M 6-Pin DIP Random-Phase Optoisolators Triac Driver Output (250/400 Volt Peak)
March 2014
Applications
■ Industrial Controls
■ Solenoid/Valve Controls
■ Traffic Lights
■ Static AC Power Switch
■ Vending Machines
■ Incandescent Lamp Dimmers
■ Solid State Relay
■ Motor Control
■ Lamp Ballasts
CATHODE 2 5 NC*
Transfer Characteristics
Symbol DC Characteristics Test Conditions Device Min. Typ. Max. Units
IFT LED Trigger Current Voltage = 3 V(3) MOC3020M 30 mA
MOC3010M 15
MOC3021M
MOC3011M 10
MOC3022M
MOC3012M 5
MOC3023M
IH Holding Current, Either All 100 µA
Direction
Notes:
2. Test voltage must be applied within dv/dt rating.
3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating
IF lies between max IFT (30 mA for MOC3020M, 15 mA for MOC3010M and MOC3021M, 10 mA for MOC3011M and
MOC3022M, 5 mA for MOC3012M and MOC3023M) and absolute maximum IF (60 mA).
1.7
600
1.6
V F - FORWARD VOLTAGE (V)
1.5
200
1.4
TA = -55oC 0
1.3
TA = 25oC -200
1.2
TA = 100oC -400
1.1 -600
1.0 -800
1 10 100 -3 -2 -1 0 1 2 3
IF - LED FORWARD CURRENT (mA) VTM - ON-STATE VOLTAGE (V)
Figure 3. LED Forward Voltage vs. Forward Current Figure 4. On-State Characteristics
1.4 25
IFT - TRIGGER CURRENT (NORMALIZED)
1.3
ITM - TRIGGER CURRENT (NORMALIZED)
20 NORMALIZED TO:
PWin ≥ 100 μs
1.2
15
1.1
1.0 10
0.9
5
0.8
0
0.7 1 2 5 10 20 50 100
NORMALIZED TO TA = 25°C
PWin - LED TRIGGER WIDTH (μs)
0.6
-40 -20 0 20 40 60 80 100
Figure 6. LED Current Required to Trigger vs. LED Pulse Width
AMBIENT TEMPERATURE - TA (oC)
12 10000
STATIC dv/dt
IDRM - LEAKAGE CURRENT (nA)
10
CIRCUIT IN FIGURE 9
1000
STATIC dv/dt (V/μs)
100
6
4
10
1
0
25 30 40 50 60 70 80 90 100
Note:
This optoisolator should not be used to drive a load directly. It is intended to be a trigger device only.
RL
Rin 1 6 180 Ω
VCC 120 V
60 Hz
2 MOC3010M 5
MOC3011M
MOC3012M
3 4
ZL
Figure 11. Inductive Load with Sensitive Gate Triac (IGT ≤ 15 mA)
Figure 12. Inductive Load with sensitive Gate Triact (IGT ≤ 15 mA)
LOAD GROUND
In this circuit the “hot” side of the line is switched and the load connected to the cold or ground side.
The 39 Ω resistor and 0.01 µF capacitor are for snubbing of the triac, and the 470 Ω resistor and 0.05 µF
capacitor are for snubbing the coupler. These components may or may not be necessary depending upon
the particular and load used.
0
0 60 120 180 270 360
Time (s)
Marking Information
MOC3010 2
6
V X YY Q
3 4 5
Definitions
1 Fairchild logo
2 Device number
VDE mark (Note: Only appears on parts ordered with VDE
3
option – See order entry table)
4 One-digit year code, e.g., ‘3’
5 Two-digit work week, ranging from ‘01’ to ‘53’
6 Assembly package code
*Note – Parts that do not have the ‘V’ option (see definition 3 above) that are
marked with date code ‘325’ or earlier are marked in portrait format.
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/N0/N06B.pdf.
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/N0/N06C.pdf.
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/N0/N06D.pdf.
12.0 ± 0.1
4.5 ± 0.20
2.0 ± 0.05 Ø1.5 MIN
0.30 ± 0.05 4.0 ± 0.1
1.75 ± 0.10
11.5 ± 1.0
21.0 ± 0.1 24.0 ± 0.3
9.1 ± 0.20
www.fairchildsemi.com
14
©2005 Fairchild Semiconductor Corporation
MOC301XM, MOC302XM Rev. 1.0.3