Professional Documents
Culture Documents
Max8867 Max8868 PDF
Max8867 Max8868 PDF
Max8867 Max8868 PDF
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
_______________General Description ____________________________Features
MAX8867/MAX8868
The MAX8867/MAX8868 low-noise, low-dropout linear ♦ Low Output Noise: 30µVRMS
regulators operate from a 2.5V to 6.5V input and deliver
up to 150mA. Typical output noise for these devices is ♦ Low 55mV Dropout at 50mA Output
just 30µVRMS, and typical dropout is only 165mV at (165mV at 150mA output)
150mA. The output voltage is preset to voltages in the ♦ Low 85µA No-Load Supply Current
range of 2.5V to 5.0V, in 100mV increments. The
MAX8867 and MAX8868 are pin-compatible with the ♦ Low 100µA Operating Supply Current
MAX8863 and MAX8864, except for the BP pin. (Even In Dropout)
Designed with an internal P-channel MOSFET pass tran- ♦ Thermal-Overload and Short-Circuit Protection
sistor, the MAX8867/MAX8868 maintain a low 100µA
supply current, independent of the load current and ♦ Reverse Battery Protection
dropout voltage. Other features include a 10nA logic- ♦ Output Current Limit
controlled shutdown mode, short-circuit and thermal-
shutdown protection, and reverse battery protection. ♦ Preset Output Voltages (±1.4% Accuracy)
The MAX8868 also includes an auto-discharge function, ♦ 10nA Logic-Controlled Shutdown
which actively discharges the output voltage to ground
when the device is placed in shutdown. Both devices
come in regular and thin 5-pin SOT23 packages.
INPUT
TOP VIEW
OUTPUT
2.5V TO 6.5V PRESET
IN OUT SHDN 1 5 BP
2.5V TO 5.0V
CIN COUT 150mA
1µF MAX8867 1µF MAX8867
MAX8868 GND 2 MAX8868
ON SHDN
OFF
BP IN 3 4 OUT
CBP GND
0.01µF
SOT23-5
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
ABSOLUTE MAXIMUM RATINGS
MAX8867/MAX8868
IN to GND ....................................................................-7V to +7V SOT23-5 Thin (derate 9.1mW/°C above +70°C) ..........727mW
Output Short-Circuit Duration ............................................Infinite Operating Temperature Range ...........................-40°C to +85°C
SHDN to GND..............................................................-7V to +7V Junction Temperature ......................................................+150°C
SHDN to IN ...............................................................-7V to +0.3V θJB (Regular)..................................................................140°C/W
OUT, BP to GND ..........................................-0.3V to (VIN + 0.3V) θJB (Thin)........................................................................110°C/W
Continuous Power Dissipation (TA = +70°C) Storage Temperature.........................................-65°C to +150°C
SOT23-5 Regular (derate 7.1mW/°C above +70°C) ....571mW Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VIN = VOUT(NOMINAL) + 0.5V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Voltage (Note 2) VIN 2.5 6.5 V
IOUT = 0mA, TA = +25°C -1.4 1.4
Output Voltage Accuracy %
IOUT = 0mA to 120mA -3 2
Maximum Output Current 150 mA
Current Limit ILIM 160 390 mA
No load 85 180
Ground-Pin Current IQ µA
IOUT = 150mA 100
IOUT = 1mA 1.1
Dropout Voltage (Note 2) IOUT = 50mA 55 120 mV
IOUT = 150mA 165
Line Regulation ∆VLNR VIN = (VOUT + 0.1V) to 6.5V, IOUT = 1mA -0.15 0 0.15 %/V
Load Regulation ∆VLDR IOUT = 0mA to 120mA, COUT = 1µF 0.01 0.04 %/mA
f = 10Hz to 100kHz, COUT = 10µF 30
Output Voltage Noise en µVRMS
CBP = 0.01µF COUT = 100µF 20
SHUTDOWN
VIH VIN = 2.5V to 5.5V 2.0
SHDN Input Threshold V
VIL VIN = 2.5V to 5.5V 0.4
TA = +25°C 0.01 100
SHDN Input Bias Current ISHDN VSHDN = VIN nA
TA = +85°C 0.5
TA = +25°C 0.01 1
Shutdown Supply Current IQ, SHDN VOUT = 0V µA
TA = +85°C 0.2
Shutdown Exit Delay CBP = 0.1µF, TA = +25°C 30 150
µs
(Note 3) COUT = 1µF, no load TA = -40°C to +85°C 300
Shutdown Discharge
MAX8868 only 300 Ω
Resistance
2 _______________________________________________________________________________________
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
ELECTRICAL CHARACTERISTICS (continued)
MAX8867/MAX8868
(VIN = VOUT(NOMINAL) + 0.5V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
THERMAL PROTECTION
Thermal-Shutdown
TSHDN 155 °C
Temperature
Thermal-Shutdown
∆TSHDN 15 °C
Hysteresis
Note 1: Limits are 100% production tested at TA = +25°C. Limits over the operating temperature range are guaranteed through
correlation using Statistical Quality Control (SQC) Methods.
Note 2: The dropout voltage is defined as VIN - VOUT, when VOUT is 100mV below the value of VOUT for VIN = VOUT + 0.5V.
Note 3: Time needed for VOUT to reach 95% of final value.
MAX8867/8-03
MAX8867/8-01
2.55 5.1
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
95
MAX886 E_K25
90
2.50 5.0 85
80
75
2.45 4.9
70
65
2.40 4.8 60
0 50 100 150 0 50 100 150 0 50 100 150
LOAD CURRENT (mA) LOAD CURRENT (mA) LOAD CURRENT (mA)
MAX8867/8-05
80 80 4
NO LOAD
NO LOAD
60 60 3
40 40 2
MAX886 E_K25
20 20 1
0 0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6 0 1 2 3 4 5 6
INPUT VOLTAGE (V) INPUT VOLTAGE (V) INPUT VOLTAGE (V)
_______________________________________________________________________________________ 3
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
MAX8867/MAX8868
MAX8867/8-08
MAX8867/8-07
MAX8867/8-09
ILOAD = 50mA
ILOAD = 50mA ILOAD = 50mA 180
160
140
MAX886 E_K50
120
2.50 5.00 100
80
MAX886 E_K25
60
2.45 4.90
40
20
2.40 4.80 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
TEMPERATURE (°C) TEMPERATURE (°C) TEMPERATURE (°C)
MAX8867/8-11
MAX8867/8-12
TA = +85°C
60
200 COUT = 10µF
TA = +85°C 150
DROPOUT VOLTAGE (mV)
TA = +25°C 50
150
PSRR (dB)
40 COUT = 1µF
100
TA = +25°C
100 TA = -40°C 30
TA = -40°C
50 20
50 ILOAD = 50mA
10 CBP = 0.1µF
0 0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 0.01 0.1 1 10 100 1000
LOAD CURRENT (mA) LOAD CURRENT (mA) FREQUENCY (kHz)
MAX8867/8-15
MAX8867/8-13
COUT = 10µF
OUTPUT NOISE SPECTRAL DENSITY (µV/√Hz)
1 40
50
MAX886 E_K50
40 30 MAX886 E_K30
30 MAX886 E_K30
0.1 COUT = 1µF 20
MAX886 E_K25
20
MAX886 E_K25
COUT = 10µF 10
10
0.01 0 0
0.1 1 10 100 1000 0.001 0.01 0.1 1 10 100
FREQUENCY (kHz) BP CAPACITANCE (µF) LOAD CURRENT (mA)
4 _______________________________________________________________________________________
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
____________________________Typical Operating Characteristics (continued)
MAX8867/MAX8868
(VIN = VOUT(NOMINAL) + 0.5V, CIN = 1µF, COUT = 1µF, CBP = 0.01µF, TA = +25°C, unless otherwise noted.)
LOAD-TRANSIENT RESPONSE
LOAD-TRANSIENT RESPONSE NEAR DROPOUT LINE-TRANSIENT RESPONSE
MAX8867/8-19 MAX8867/8-20 MAX8867/8-18
3.01V 3.01V 4V
VIN
3.00V 3.00V VOUT 3V
VOUT
2.99V 2.99V
3.001V
VOUT
50mA 50mA 2.999V
ILOAD ILOAD
0mA 0mA
2V VSHDN VSHDN
VSHDN 2V 2V
CBP = 0.01µF CBP = 0.01µF
0V 0V 0V
2V VOUT 4V VOUT
CBP = 0.1µF
VOUT
CBP = 0.1µF
1V 2V
0V 0V 0V
10
COUT ESR (Ω)
COUT = 1µF
VOUT 1
50µV/div COUT = 10µF
STABLE REGION
0.1
0.01
1ms/div 0 20 40 60 80 100 120 140
COUT = 10µF, CBP = 0.1µF, ILOAD = 10mA LOAD CURRENT (mA)
_______________________________________________________________________________________ 5
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
______________________________________________________________Pin Description
MAX8867/MAX8868
Active-Low Shutdown Input. A logic low reduces the supply current to 10nA. On the MAX8868, a logic low
1 SHDN
also causes the output voltage to discharge to GND. Connect to IN for normal operation.
Ground. This pin also functions as a heatsink. Solder to a large pad or the circuit-board ground plane to
2 GND
maximize power dissipation.
Regulator Input. Supply voltage can range from 2.5V to 6.5V. Bypass with a 1µF capacitor to GND (see
3 IN
Capacitor Selection and Regulator Stability section).
4 OUT Regulator Output. Sources up to 150mA. Bypass with a 1µF (<0.2Ω typical ESR) capacitor to GND.
Reference-Noise Bypass. Bypass with a low-leakage, 0.01µF ceramic capacitor for reduced noise at the
5 BP
output.
IN REVERSE
BATTERY
SHDN PROTECTION
*
THERMAL 1.25V
SENSOR REF
GND
BP
* AUTO-DISCHARGE, MAX8868 ONLY
6 _______________________________________________________________________________________
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
An external bypass capacitor connected to the BP pin Operating Region and Power Dissipation
MAX8867/MAX8868
reduces noise at the output. Additional blocks include a The MAX8867/MAX8868’s maximum power dissipation
current limiter, reverse battery protection, thermal sen- depends on the thermal resistance of the case and cir-
sor, and shutdown logic. The MAX8868 also includes cuit board, the temperature difference between the die
an auto-discharge function, which actively discharges junction and ambient air, and the rate of air flow. The
the output voltage to ground when the device is placed power dissipation across the device is P = IOUT (VIN -
in shutdown mode. VOUT). The maximum power dissipation is:
Output Voltage PMAX = (TJ - TA) / (θJB + θBA)
The MAX8867/MAX8868 are supplied with factory-set where TJ - TA is the temperature difference between the
output voltages from 2.5V to 5V, in 100mV increments. MAX8867/MAX8868 die junction and the surrounding
Except for the MAX886 E_K29 and the MAX886 E_K32 air, θJB (or θJC) is the thermal resistance of the pack-
(which have an output voltage preset at 2.84V and age, and θBA is the thermal resistance through the
3.15V, respectively), the two-digit suffix allows the cus- printed circuit board, copper traces, and other materi-
tomer to choose the output voltage in 100mV increments. als to the surrounding air.
For example, the MAX8867EUK33 has a preset output The GND pin of the MAX8867/MAX8868 performs the
voltage of 3.3V. (see Expanded Ordering Information). dual function of providing an electrical connection to
Internal P-Channel Pass Transistor ground and channeling heat away. Connect the GND
The MAX8867/MAX8868 feature a 1.1Ω typical P-chan- pin to ground using a large pad or ground plane.
nel MOSFET pass transistor. This provides several Reverse Battery Protection
advantages over similar designs using PNP pass tran- The MAX8867/MAX8868 have a unique protection
sistors, including longer battery life. The P-channel scheme that limits the reverse supply current to 1mA
MOSFET requires no base drive, which reduces quies- when either VIN or V SHDN falls below ground. Their cir-
cent current considerably. PNP-based regulators waste cuitry monitors the polarity of these two pins and dis-
considerable current in dropout when the pass transis- connects the internal circuitry and parasitic diodes
tor saturates. They also use high base-drive currents when the battery is reversed. This feature prevents
under large loads. The MAX8867/MAX8868 do not suf- device damage.
fer from these problems and consume only 100µA of
quiescent current whether in dropout, light-load, or Noise Reduction
heavy-load applications (see the Typical Operating An external 0.01µF bypass capacitor at BP, in conjunction
Characteristics). with an internal 200kΩ resistor, creates an 80Hz lowpass
filter for noise reduction. The MAX8867/MAX8868 exhibit
Current Limit 30µVRMS of output voltage noise with CBP = 0.01µF
The MAX8867/MAX8868 include a current limiter, which and C OUT = 10µF. Start-up time is minimized by a
monitors and controls the pass transistor’s gate voltage, power-on circuit that pre-charges the bypass capacitor.
limiting the output current to 390mA. For design purposes, The Typical Operating Characteristics show graphs of
consider the current limit to be 160mA minimum to 500mA Noise vs. BP Capacitance, Noise vs. Load Current, and
maximum. The output can be shorted to ground for an Output Noise Spectral Density.
indefinite amount of time without damaging the part.
__________Applications Information
Thermal-Overload Protection
Thermal-overload protection limits total power dissipa- Capacitor Selection and Regulator Stability
tion in the MAX8867/MAX8868. When the junction tem- Normally, use a 1µF capacitor on the MAX8867/
perature exceeds T J = +170°C, the thermal sensor MAX8868’s input and a 1µF to 10µF capacitor on the
signals the shutdown logic, turning off the pass transis- output. Larger input capacitor values and lower ESRs
tor and allowing the IC to cool. The thermal sensor will provide better supply-noise rejection and line-transient
turn the pass transistor on again after the IC’s junction response. Reduce noise and improve load-transient
temperature cools by 20°C, resulting in a pulsed output response, stability, and power-supply rejection by
during continuous thermal-overload conditions. using large output capacitors. For stable operation over
Thermal-overload protection is designed to protect the the full temperature range and with load currents up to
MAX8867/MAX8868 in the event of fault conditions. For 150mA, a minimum of 1µF is recommended. Note that
continual operation, do not exceed the absolute maxi- some ceramic dielectrics exhibit large capacitance and
mum junction-temperature rating of TJ = +150°C. ESR variation with temperature. With dielectrics such as
_______________________________________________________________________________________ 7
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
Z5U and Y5V, it may be necessary to use 2.2µF or show the MAX8867/MAX8868’s line- and load-transient
MAX8867/MAX8868
8 _______________________________________________________________________________________
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
Package Information
MAX8867/MAX8868
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
SOT5L.EPS
_______________________________________________________________________________________ 9
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
MAX8867/MAX8868
THIN SOT23.EPS
10 ______________________________________________________________________________________
Low-Noise, Low-Dropout,
150mA Linear Regulators in SOT23
Package Information (continued)
MAX8867/MAX8868
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11
© 2002 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.