Professional Documents
Culture Documents
Hilti Anchor Check
Hilti Anchor Check
5
Company: Page: 1
Specifier: Project: 20-1412-B01 App. C
Address: Fastening Point:
Phone I Fax: | Date: 17-12-2020
E-Mail:
Specifier's comments:
1 Input data
Anchor type and size: HIT-HY 200-A + HIT-V-R M24
Effective embedment depth: hef,act = 140 mm (hef,limit = - mm)
Material: A4
Approval No.: ETA 11/0493
Issued I Valid: 28-7-2017 | -
Proof: Design method ETAG BOND (EOTA TR 029)
Stand-off installation: without clamping (anchor); restraint level (baseplate): 2,00; eb = 50 mm; t = 15 mm
Hilti Grout: , multipurpose, fc,Grout = 30,00 N/mm2
Baseplate: lx x ly x t = 260 mm x 260 mm x 15 mm; (Recommended plate thickness: not calculated
Profile: IPB/HEB; (L x W x T x FT) = 120 mm x 120 mm x 7 mm x 11 mm
Base material: cracked concrete, C35/45, fc,cube = 45,00 N/mm2; h = 200 mm, Temp. short/long: 40/24 °C
Installation: hammer drilled hole, Installation condition: Dry
Reinforcement: No reinforcement or Reinforcement spacing >= 150 mm (any Ø) or >= 100 mm (Ø <= 10 mm)
no longitudinal edge reinforcement
Reinforcement to control splitting according to EOTA TR 029, 5.2.2.6 present.
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
www.hilti.nl Profis Anchor 2.7.5
Company: Page: 2
Specifier: Project: 20-1412-B01 App. C
Address: Fastening Point:
Phone I Fax: | Date: 17-12-2020
E-Mail:
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
www.hilti.nl Profis Anchor 2.7.5
Company: Page: 3
Specifier: Project: 20-1412-B01 App. C
Address: Fastening Point:
Phone I Fax: | Date: 17-12-2020
E-Mail:
3 Warnings
• Please consider all details and hints/warnings given in the detailed report!
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan