Professional Documents
Culture Documents
Given: 3. Purlins Design
Given: 3. Purlins Design
3. PURLINS DESIGN
Given
Height of truss 1.50 m. Using section 150x50x2
Length of truss 20.00 m. Weight = 4.2 kg/m
Spacing of truss 7.10 m. H= 150 mm.
Slope of roofing 0.15 m. B= 50 mm.
Spacing of purlins 0.60 m. Tf = 2 mm.
ht. of roof 7.00 m. Ix = 203 Cm4
Iy = 23 Cm4
Exposure category B Sx = 27 Cm3
Importance factor. Iw 1.00 Sy = 7 Cm3
Wind Velocity 260.00
Kzt 1.00 Roof Angle Θ = 8.5307656 Degrees
Kz 0.71
Kd 0.85
Modulus of elasticity of steel 200.00 Gpa
Yield strength of steel 170.00 Mpa
Sag rods: mid point
Enter no. 2.00
Loads Normal loads, Wn:
Dead loads:
G.I. Roofing: 77.00 Pa DL = 86.43501511 N/m
LL = 356.017087 N/m
77.00 Pa WL = (1,753.79) N/m
Live loads: 600.00 Pa
Wind loads -
Tangential loads, Wt
Design wind pressure, P qz = 47.3x10^-6 * kz * kzt * kd * V^2 * Iw
1,929.68 Pa DL = 12.96525227 N/m
Wind Pressure for Roof, P (2,922.98) Pa LL = 53.40256305 N/m
Yn = 5Wn L4
= 36.06 mm SAFE
384EIx
STRUCTURAL CALCULATION
Poject: Design of Steel Trusss
Location: Romblon
4. TRUSS DESIGN
Dead Load
Live Load
Wind Load
STRUCTURAL CALCULATION
Poject: Design of Steel Trusss
Location: Romblon