Professional Documents
Culture Documents
MAXWAY Amphibious Pontoon Introduction
MAXWAY Amphibious Pontoon Introduction
MAXWAY Amphibious Pontoon Introduction
Good designed pontoon shape for working on different terrains. Easier to climb and move in soft mud.
Updated pontoon inner structure with higher strength, so lifetime could be longer. And safer for working on deep water.
1
MAXWAY MACHINE COMPANY LTD
Installed DOOSAN hydraulic travel motors in our pontoons. They could get global warranty from DOOSAN.
Quality could be guaranteed. And repair and maintenance will be very easy to do in your local market.
Ends of our driving / driven wheels are forging part. It is stronger too much than casting part and common steel part.
They could supply more reliable strength for driving the whole amphibious excavator.
(Forging part is expensive a lot than casting part and common steel part, but strength is higher too much).
2
MAXWAY MACHINE COMPANY LTD
On the pontoon side, we will add a special material, as the following left photo.
This special material could help to reduce the corrosion of acid water or salty water. So, pontoon lifetime could be longer.
Pontoon inside and outside is painted high quality anti-rust paint, they could protect pontoons very well.
Armrests and pedal for operator to climb on pontoons. The armrests are bolted on pontoons, easy to remove and replace them.
Pedal is big enough for operator to step on.
3
MAXWAY MACHINE COMPANY LTD
On the steel holes that hydraulic hoses will passed, we add soft rubber cover to protect hoses to be worn by steel.
User-friendly design will make you work happy and like to use them.
For each set of pontoon undercarriage, we supply a set of spare parts for free (5 pcs of track shoes and 20 sections of chains).
They could be very helpful when you need to replace some parts urgently.
Side pontoons with hydraulic fully automatic spuds for amphibious excavator to work on deep water and flowing water.
The side pontoons could raise the width of the whole pontoon undercarriage, so it could help to keep balance.
And spuds could be pushed into river bed by hydraulic system to fix excavator steadily, very easy to operate.
4
MAXWAY MACHINE COMPANY LTD
Amphibious excavators assembled our MAXWAY amphibious pontoon undercarriage working in different working conditions:
5
MAXWAY MACHINE COMPANY LTD
1) In MAXWAY pontoons, we will install big torque hydraulic travel motors (DOOSAN brand).
For example, for our amphibious pontoons for 20--23 ton class excavators, they will be installed DOOSAN TM60VC (standard
pontoon) or TM70VC (hydraulic extendable pontoon) travel motors.
For other suppliers, they install DOOSAN TM40VC travel motors. Driving force of TM40VC is smaller a lot than our TM60VC
and TM70VC, also price is cheap a lot.
For their small size travel motors, the driving wheels will be smaller size too. Price is cheaper than ours, but small driving wheels
will bear too much pull force, easy to be broken.
2) Our MAXWAY sprockets are made by alloy with heat treatment. The cost is higher, but lifetime is longer.
Some suppliers’ driving / driven wheel sprockets are made by common casting without heat treatment.
Very easy to be worn and broken.
3) Our sprockets are bolted on driving / driven wheels. Very easy for users to replace sprockets after working for several years.
Some suppliers weld their sprockets on the driving / driven wheel. Cost is cheaper, but very difficult to replace sprockets.
6
MAXWAY MACHINE COMPANY LTD
4) We supply the whole set of hydraulic pipelines that connect hydraulic travel motors with your excavator centre revolving joint.
So, when you getting our pontoons, you could connect these hydraulic pipelines with your excavator directly, no need to buy
more pipelines by yourself.
Some suppliers only supply 1 or 2 meter long hydraulic pipeline to save cost.
But users have to buy more pipelines to connect their excavators.
5) For our pontoon bottom, we have special design : double-layer chain tracks on pontoon bottom.
On the chain tracks, all the factories will weld wear-resistance steel plate to protect pontoons.
If users forget to check the wear-resistance steel plates after using pontoons for several years,
the chain track at the pontoon bottom easy to be worn. Water will go into pontoon, that is not safe.
Considering this matter, our engineers make double layer chain tracks on pontoon bottom (pontoon inside).
Even the chain tracks are worn, the second layer will help to stop water go into pontoon.
So, users could drive amphibious excavator to land to repair safely.
7
MAXWAY MACHINE COMPANY LTD
Some cheap pontoon track shoes inside is empty, no inner structure to supply strength. Very easy to be bent and broken.
VS
7) Our chains are specially made by 40Cr alloy with heat treatment.
They are specially designed by our chief engineer according to his 18 years pontoon design experience.
Lifetime is longer. So your repair cost is lower, and not waste your time.
VS
8
MAXWAY MACHINE COMPANY LTD
Some suppliers weld chains and track shoes together, it is a bad thing for users to replace chains.
9) On each pontoon side, we make 3 check holes for users to go into pontoons for checking and repair.
On the checking hole door, we make special seal to stop water go into pontoons.
This seal has better working performance other common seal.
Some cheap pontoons do not have checking holes. If pontoon need to be repaired, that will be very difficult.
M VS
10) We supply 5 pieces of track shoes and 20 sections of chains for each set of pontoon undercarriage for free.
These parts are helpful when you need to replace them urgently.
9
MAXWAY MACHINE COMPANY LTD
11) At last, our pontoons are better design and better paint.
So, they look more beautiful and powerful. The good outward appearance could help you to attract your clients
to rent your machine or help you to win the bid for more projects.
10