Professional Documents
Culture Documents
Technical Info Express Information Express Technique
Technical Info Express Information Express Technique
FOR SAVFR 21
INFORMATION EXPRESS TECHNIQUE A
MACHINE: PHOTOBOOK PRO
Date : 05/02/07 SAV IET N°01 V02 ed 01 Page : 1/1
SUMMARY/SOMMAIRE: Installing a second paper cutter
Application on : Application mode/Modalité d’application :
Application sur : Immediately :immédiatement :
all machines If necessary /si nécessaire : Í
Periodically/périodiquement :
toutes les machines Next service call/lors d’un passage:
Problem:
Cause:
The S/A detection end of glue (white gear) is not in contact with the cartridge glue
flange, the detection cannot be done. This is due to the coding wheel plastic support
which touches the machine’s cover. The spring cannot move the full S/A coding
wheel to the bottom position.
Solution:
Remove the machine cover and cut the angle (shown in red) of the grey plastic plate
in order that it doesn’t touch anymore the machine cover.
WARNING: Be careful to no put shavings everywhere
frghjkehrkj
AFT
BEFORE AFTER
THESE INFORMATIONS ARE DESIGNED ONLY FOR TECHNICIANS AND ARE CONFIDENTIAL, AND NOT CONTRACTUAL.
CES INFORMATIONS SONT FAITES POUR DES TECHNICIENS ET SONT CONFIDENTIELLES ET NON CONTRACTUELLES.