Professional Documents
Culture Documents
Philips DVDR 610 Owners Manual
Philips DVDR 610 Owners Manual
DVDR615
DVDR616
User manual
English
use of your new DVD recorder easier for you.
English
Discs for recording ................................... 36 Browsing the disc ...................................... 50
Recording settings ..................................... 36 Colour coded buttons functions .............. 50
Recording mode ........................................... 37 Browsing the picture disc ........................ 51
Recording language ...................................... 37 Adding pictures to an album ...................... 51
Inserting chapter markers .......................... 37 Changing the picture order within
Direct record function ................................ 38 an album ....................................................... 52
Filter mode ..................................................... 38 Deleting an album ......................................... 52
Manual recording ................................. 38-39 Deleting picture in an album ...................... 52
Manual recording with automatic Changing the slide show settings .............. 53
turn-off (one touch recording) .............. 39 Protecting the recorded title
Direct recording ........................................ 40 (DVD+RW) ................................................ 53
Deleting a recording ................................. 40
System Menu - Preferences
Timer Recording Accessing to the Preferences options .. 54
Recording ....................................................... 54
Introduction ............................................... 41
Sound .............................................................. 54
Programming recordings ................... 41-42 Disc .................................................................. 55
Programming recording from a Access ............................................................. 55
Cable Box ....................................................... 42 Features .......................................................... 55
Programming recordings with
ShowView® System ................................... 43 System Menu - Setup
Changing a programmed recording ...... 44
Accessing to the Setup options ............. 56
Deleting a programmed recording ........ 44 System ....................................................... 56-57
Time-date ....................................................... 57
Editing/Finalising Recording Analogue channels ........................................ 57
About editing ............................................. 45 Video output ............................................ 57-58
Colour coded buttons functions .............. 45 Audio output ................................................. 58
Index Picture screen .................................... 45 Language ......................................................... 58
Changing the disc/title name .................. 46
Making the editing compatible Setting Access Control
(DVD+RW) ................................................ 46 About Access Control ............................. 59
Finalising disc (DVD+R) ........................... 46 Setting or changing the pin code ........... 59
Video editing .............................................. 47 Activating/Deactivating the child lock .. 59
Hiding unwanted chapter ........................... 47 Authorising discs .......................................... 60
Editing chapter (merge/split/hide) ............. 48
Editing title (divide/append/ Troubleshooting ............................. 61-65
index picture) ........................................ 48-49
Deleting chapter markers ........................... 49
Photo editing .............................................. 49 Display panel symbols/
messages ................................................ 66-67
Specifications ........................................... 68
Glossary ......................................................... 69
English
Your Philips DVD recorder allows you to – Remote control and batteries
record the TV programmes or duplicate – Scart cable
camcorder recordings to a DVD+RW or – Antenna cable
DVD+R and play pre-recorded DVDs. – Quick Use Guide
The recordings you make on the
Recorder will play on some DVD players
and DVD-ROM drives. The DVD+R discs
have to be finalised before they can be Region codes
played on other DVD players. DVD films are usually not released at the
same time in all regions of the world, thus
Please take the time to read this user all DVD players/recorders are keyed to a
manual before using your DVD recorder. specific region code.
It contains important information and
notes regarding operation. This device will only play
Region 2 DVDs or DVDs ALL
Helpful Hints: manufactured to be played in all
– If you have questions or if problems come regions ('ALL'). DVDs from other
2
up during operation, please see the chapter regions cannot be played on this
'Troubleshooting'. DVD recorder.
– If you need further assistance, please call
the customer support service for your
country. The corresponding telephone
numbers and e-mail addresses are given in
the guarantee booklet.
10
English
socket
TV
Antenna or
Satellite/Cable TV signal AU D IO
O U T
S-V ID E O
IN
V ID E O IN
SCART IN
1 2 3
The scart or Euro AV cable serves as the 5 Press STANDBY-ON 2 on the DVD
universal connector for picture, sound recorder to turn it on.
and control signals. With this type of ➜ The message 'IS THE TV ON?'
connection, there is practically no loss of appears on the display panel.
quality in picture or sound transmission.
6 Turn on the TV power.
Have the following cables ready: ➜ If the connection has properly made,
1) Antenna cable your TV will automatically turn on to the
2) SCART cable Video Input channel for the SCART
socket and you should see the
1 Turn off your TV and remove the antenna { Language and Country } menu
cable from your TV (or Satellite Receiver/ appears on the TV.
Cable Box). Insert it into the ➜ If not, select the correct Video In
ANTENNA IN socket at the back of channel at the TV manually until you see
the DVD recorder. the { Language and Country } menu.
2 Use the supplied antenna cable to 7 Proceed to page 21 to continue the first
connect the DVD recorder’s TV OUT installation.
socket to the antenna input socket at the
back of your TV set. Helpful Hints:
– If your TV set has several SCART sockets,
3 Use a SCART cable to connect the DVD select the SCART socket that is suitable for
recorder’s EXT 1 (TO TV-I/O) socket both video output and video input.
to the SCART socket at the back of your – If your TV set displays a selection menu for
TV set. the SCART socket, select 'VCR' as the source
for the SCART socket.
4 Connect the power cable from the DVD – The EXT 2 AUX-I/O socket is intended
recorder’s ~ MAINS to the power only for additional devices.
supply.
11
(Y/C) socket
TV
Antenna or
Satellite/Cable TV signal AU D IO
O U T
S-V ID E O
IN
V ID E O IN
SCART IN
1 2
3 4
This connecting cable, also known as the 4 Use an audio cable (red/white) to
SVHS cable, is used to transmit the connect the DVD recorder’s
brightness signal (Y signal) and colour AUDIO L/R OUT socket to the audio
signal (C signal) separately. This mini DIN input socket at the back of your TV set
socket is also called a Hosiden jack. (or labelled as AV In or Audio In).
Have the following cables ready: 5 Connect the power cable from the DVD
1) Antenna cable recorder’s ~ MAINS to the power
2) S-Video (SVHS) cable (not supplied) supply.
3) Audio cables (red/white, not supplied)
6 Press STANDBY-ON 2 on the DVD
1 Turn off your TV and remove the antenna recorder to turn it on.
cable from your TV (or Satellite Receiver/ ➜ The message 'IS THE TV ON?'
Cable Box). Insert it into the appears on the display panel.
ANTENNA IN socket at the back of 7 Turn on the TV power. Select the correct
the DVD recorder. Video In channel at the TV (see page 10).
2 Use the supplied antenna cable to ➜ The first installation menu
connect the DVD recorder’s TV OUT { Language and Country } will appear
socket to the antenna input socket at the on the TV.
back of your TV set 8 Proceed to page 21 to continue the first
3 Use an S-Video (SVHS) cable to connect installation.
the DVD recorder’s S-VIDEO (Y/C)
OUT socket to the S-Video In socket at
the back of your TV set (or labelled as
S-Video In or SVHS).
12
English
(CVBS) socket
TV
Antenna or
Satellite/Cable TV signal AU D IO
O U T
S-V ID E O
IN
V ID E O IN
SCART IN
1 2 4 3
This cable, usually featuring yellow cinch 4 Use an audio cable (red/white) to
plugs, is used for transmitting the connect the DVD recorder’s
Composite Video signal (FBAS, CVBS). In AUDIO L/R OUT socket to the audio
this method of transmission, the colour input socket at the back of your TV set
signal and the brightness signal are (or labelled as AV In or Audio In).
transmitted on the same cable.
5 Connect the power cable from the DVD
Have the following cables ready: recorder’s ~ MAINS to the power
1) Antenna cable supply.
2) Video (CVBS) cable (yellow, not supplied)
3) Audio cables (red/white, not supplied) 6 Press STANDBY-ON 2 on the DVD
recorder to turn it on.
1 Turn off your TV and remove the antenna ➜ The message 'IS THE TV ON?'
cable from your TV (or Satellite Receiver/ appears on the display panel.
Cable Box). Insert it into the 7 Turn on the TV power. Select the correct
ANTENNA IN socket at the back of
Video In channel at the TV (see page 10).
the DVD recorder. ➜ The first installation menu
2 Use the supplied antenna cable to { Language and Country } will appear
connect the DVD recorder’s TV OUT on the TV.
socket to the antenna input socket at the 8 Proceed to page 21 to continue the first
back of your TV set. installation.
3 Use a video (CVBS) cable to connect the
DVD recorder’s VIDEO (CVBS) OUT
socket to the Video In socket at the back
of your TV set (or labelled as Video In, AV
In or Composite).
13
Helpful Hint:
– Most prerecorded video cassettes and
DVDs are copy-protected. If you try to copy
them, the message 'COPY PRO' appears on
the display panel.
14
English
the front sockets
2
1 R
OR
CH- CH+
CH- CH+
You can use the front sockets to copy Option 2: Using S-VIDEO In or
camcorder recordings. These sockets are VIDEO In socket
located behind the flap on the right hand
Use S-VIDEO connection if you have a
side.
Hi8 or S-VHS(C) camcorder. It provides
very good picture quality.
Option 1: Using DV IN socket
Alternatively, you can use VIDEO
(for DVDR615 and DVDR616 only)
connection if your camcorder has only a
Use this connection if you have a Digital
single video output (Composite Video,
Video or Digital 8 camcorder. The DV
CVBS). It provides good picture quality.
socket will conforms to the i.Link
standard. It provides the best picture 1 Use a S-video cable to connect the DVD
quality. recorder’s S-VIDEO input socket to the
● Use an i.LINK 4-pin cable to connect the appropriate S-VHS output socket on the
DVD recorder’s DV IN socket to the camcorder.
appropriate DV output socket on the OR
camcorder. Use a video cable (yellow) to connect the
DVD recorder’s VIDEO input socket to
Before start operating, select ‘CAM 2’ as
the appropriate video output socket on
the input channel.
the camcorder.
For recording, see pages 38~39.
2 Use an audio cable (red/white) to
Helpful Hints: connect the DVD recorder’s
– You can also use the DV IN to connect the AUDIO L/R input socket to the audio
DVD recorder to a Personal Computer that output socket on the camcorder.
has a DV output socket. The PC must have
an IEEE 1394 Firewire connector. Before start operating, select ‘CAM1’ as
– The DV socket on this recorder can only the input channel.
receive input signals, it cannot output signals. For recording, see pages 38~39.
15
sockets socket
STEREO AUDIO IN
L
DIGITAL IN
R
You can connect the DVD recorder to a You can connect the DVD recorder to a
two channel stereo system or receiver in A/V receiver or amplifier in order to
order to enjoy the stereo sound system. enjoy the home theatre system’s
surround sound capabilities.
● Use an audio cable (red/white) to
connect AUDIO L/R (red/white) to one ● Use a coaxial cable to connect COAXIAL
of the following devices : to one of the following devices :
– a stereo system (for example, mini system – an A/V receiver or an A/V amplifier with a
or TV) digital multi-channel sound decoder
– a receiver with Dolby Surround Pro Logic – a receiver with two channel digital stereo
– a receiver with two channel analogue (PCM)
stereo
Before start operating, set the Digital
Before start operating, set the Analogue Output accordingly (see page 58). If the
Output accordingly (see page 54). Digital Output setting does not match
Choose a sound mode setting that is your stereo’s capabilities, the stereo may
most compatible with the connected produce a strong, distorted sound or no
devices. sound at all.
16
English
1 2 3 4 5 67 8 9
1.3
CH- CH+
! @ #
0 CAM 1
DV IN
CAM 2
3 OPEN/CLOSE ç 0 S-VIDEO
– Open or close the disc tray. – S-video input for SVHS/Hi8 camcorders
or SVHS/Hi8 video recorders (input
4 Display panel channel number 'CAM 1').
– Show information about the current
status of the DVD recorder. ! VIDEO
– Video input for camcorders or video
5 PLAY 2 recorders (input channel number
– Play a disc. 'CAM 1').
9 NEXT/CH+ §
– Go to the next chapter/track, do a
forward search, or go to the next
channel.
17
left or right.
34: Cursor buttons for moving up/down
or going to the next/previous channel.
5 SELECT
– Select a function.
– Toggle between upper and lower case
characters while using the alphanumeric
keypad.
6 REC 0
– Start recording the current TV channel or
CH+
the current video input source.
7∞§
– Skip to the previous or next Chapter/
Track.
CH-
– Holding down the button for fast reverse
or fast forward function.
8 RETURN
– Return to the previous menu on a video
CD (VCD) or some DVDs.
9 Colour coded buttons
– A number of functions are available via
the colour coded button. These functions
are displayed in the bottom of the on-
screen menu wherever applicable.
0 TUNER
– Switch between the internal tuner mode
(TV programmes, external channels).
! REC MODE
– Select a recording speed : M1, M2, M2x,
M3, M4, M6 or M8. This determines the
quality of the recording and the amount/
1 STANDBY-ON 2 length of time you can record on a
– Turn on or off the DVD recorder. DVD+R(W).
2 TIMER @ TV/DVD
– Access or exit the timer recording menu. – Switch between playback from the
additional devices (connected via
3 SYSTEM-MENU EXT 2 AUX-I/O socket) and playback
– Access or exit the system menu. from the DVD recorder.
18
English
– Enter numbers or letters in appropriate
entry fields.
– Select a chapter/track number to play.
– Select a TV channel while in internal
13
tuner mode.
$ BROWSER
– Display the on-screen Media Browser
that allows you to browse through and
manage the contents stored in the 14
currently loaded disc.
15
% DISC-MENU CH+
^ OK
– Store or confirm an entry. 17 CH-
& EDIT 18
– Access or exit the edit menu. 19
* STOP 9 20
– Stop playback/recording.
– Holding down the button will open or
21
close the disc tray.
( PLAY 2 22
– Play a disc. 23
) PAUSE ; 24
– Pause the playback or recording.
– Press repeatedly to advance a paused
picture one frame at a time.
¡ T/C (Title/Chapter)
– Select a 'T'(title)/'C'(chapter) directly on
the menu bar.
™ TV VOL + / - ≤ TV MODE
– Adjust the volume of the TV set (for – Switch to TV source mode.
Philips TV with RC5 code only). After that, you may use the following
buttons to control most of the Philips TV
£ DVD MODE set:
– Switch to DVD source mode. – STANDBY 2: Turn off the TV set.
After that, you cannot use the buttons on – 0-9: Press to select a TV channel at the
the remote control to operate your TV.
Philips TV. – 3 4 : Press to change TV channels at
the TV.
19
20
English
The First Installation menu will appear to confirm.
the very first time you turn on the DVD ➜ The { TV Format } menu appears on
recorder. These settings will help you set the TV.
up the basic DVD recorder features TV FORMAT
Select your TV format
easily, including TV channels and language
options. TV Format 4:3 Panscan
4:3 Letterbox
Done
IMPORTANT! 16:9
Skip Search
made all the required connections to the – If the DVD recorder cannot find any TV
DVD recorder, the TV and Satellite stations, select programme number {1} on
Receiver/Cable Box (if any) and switched the TV set or check the cable connection
them on. The automatic channel search from the antenna socket to the DVD
will detect the signals and save all the recorder and TV set.
available programme channels. – If the sound or picture is distorted on any
of the stored TV channels, see pages 23~27
0 Press OK again to start automatic TV “TV channel programming” for manual TV
channel search. search or fine-tuning.
➜ The automatic search may take 15
minutes.
! When TV channel search complete, press
OK to continue.
➜ The { Time and Date } menu appears
on the TV.
TIME AND DATE
Check time and date and correct if
necessary
Time 09:00
Date 26.06.2004
Done OK
English
Although the DVD recorder selects TV sequence
available TV channels during first This feature is only available if you
installation, you may want to repeat the have connected the DVD recorder
process later if more channels become to your TV using the scart socket
available in your area or if you are (EXT 1 TO TV-I/O socket,) see page
reinstalling the DVD recorder. 11.
When the automatic TV channel search
Automatic TV channel search function is activated, the TV channels are
This will erase and replace all previously stored in a specific order. This may differ
stored TV channels. from the order in which the TV channels
appear on your TV. This function changes
1 Press SYSTEM-MENU on the remote the order of the TV channels stored in
control. your DVD recorder to match the order
➜ The system menu appears on the TV. on the TV.
2 Press 4 repeatedly to select { Set-up }. 1 Press SYSTEM-MENU.
3 Press 2 repeatedly to select { Analogue ➜ The system menu appears on the TV.
Ch. }. 2 Press 4 repeatedly to select { Set-up }.
DVD-VIDEO-TITLE 04|CO1
Analogue Ch.
STOP 3 Press 2 repeatedly to select { Analogue
Set-up Ch. }.
Auto search
4 Press 4 repeatedly to select
Follow TV
Sort
{ Follow TV } and press 2 to start
Favourites sorting.
5 Press OK to confirm the message on the
TV.
4 Press 4 to select { Auto search } and ➜ 'TV 01' will appear on the display
press 2 to confirm. panel.
➜ The automatic TV channel search 6 Use the TV’s remote control to select
starts. This allows the DVD recorder to programme number {1} on your TV set.
save all available TV channels. Then, press OK on the DVD recorder’s
➜ This process may take several minutes. remote control.
Once complete, the total number of ➜ If the DVD recorder finds the same TV
channels found appears on the TV. channel as on the TV set, it stores it as
‘P01’.
➜ 'TV 02' will then appear on the display
panel.
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
23
➠
003 ORF2 003 ORF2
004 BC2 004 BC2
005 CHAN 005 CHAN
006 RTL4 006 RTL4
007 SBS6 007 SBS6
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
24
English
You can set your favourite TV channels In some cases, not all of the available TV
for quick access by using the channel up/ channels may have been found and stored
down button on the remote control. during first installation. In this case, you
will need to search for and store the
1 Press SYSTEM-MENU. missing or coded TV channels manually.
➜ The system menu appears on the TV.
1 Press SYSTEM-MENU.
2 Press 4 repeatedly to select { Set-up }. ➜ The system menu appears on the TV.
3 Press 2 repeatedly to select { Analogue 2 Press 4 repeatedly to select { Set-up }.
Ch. }.
3 Press 2 repeatedly to select { Analogue
4 Press 4 repeatedly to select Ch. }.
{ Favourites } and press 2 to confirm.
➜ A list of TV channel programmes DVD-VIDEO-TITLE 04|CO1 STOP
Set-up
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
25
to confirm.
Use the alphanumeric keypad 0-9 to Some TV channels send coded TV signals
enter the preset number for the channel that can only be viewed properly with a
to store (e.g., '01'), then press the purchased or rented decoder. You can
connect such a decoder (descrambler) to
matching colour coded button to select
your DVD recorder (see page 14).
{ Store }.
The following function automatically
8 Press 4 to select { Preset name } and activates the connected decoder for the
press 2 to confirm. TV channel you want to watch.
Use the alphanumeric keypad 0-9 to
enter the preset name for the found 1 Press SYSTEM-MENU.
channel or preset, then press the ➜ The system menu appears on the TV.
matching colour coded button to select
{ Store }. 2 Press 4 repeatedly to select { Set-up }.
➜ Maximum four characters for preset 3 Press 2 repeatedly to select { Analogue
name. Ch. }.
9 Repeat steps 6~8 to search for other DVD-VIDEO-TITLE 04|CO1 STOP
TV channels. Analogue Ch.
Set-up
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
26
English
If the DVD recorder does not set the
DVD-VIDEO-TITLE 04|CO1 STOP
Analogue Ch.
time and date correctly, you can set the
Set-up clock manually by following the steps
Decoder
below.
TV system
Nicam 1 Press SYSTEM-MENU on the remote
Fine Tune
control.
➜ The system menu appears on the TV.
2 Press 4 repeatedly to select { Set-up }.
3 Press 2 repeatedly to select
To improve the sound transmission
{ Time-date }.
of the TV channel
NICAM is a digital sound transmission DVD-VIDEO-TITLE 04|CO1 STOP
system. Using NICAM, you can transmit Time-date
Date
reception is poor and the sound
distorted, you can turn off NICAM.
1 Move to { NICAM } and press 2 to
select { On } or { Off }.
2 Press 1 to confirm. 4 Press 4 to select { Time } and press 2 to
enter the time field.
To finetune the TV channels ➜ { 00 : 00 } (hours : minutes )
1 Move to { Finetune } and press 2. 5 Press 3 4 to change the first digit and
press 2 to go to the next digit field.
2 Press 1 2 to fine-tune the TV channel
manually, then press the matching colour 6 Repeat step 5 until the time is entered
coded button on the remote control to correctly, then press OK to confirm.
select { Store }.
7 Press 4 to select { Date } and press 2 to
enter the date field.
➜ { 00 : 00 : 0000 } (day : month : year).
8 Repeat step 5 until the date is entered
correctly, then press OK to confirm.
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
27
Set-up
Menu
Audio
Subtitle
Country
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
28
English
– If the inhibit icon (XError)
Using this DVD Recorder, you can play appears on the TV screen when a
and record on the following discs: button is pressed, it means the
function is not available on the
Recording and Playback current disc or at the current time.
DVD+RW (DVD ‘plus’ – DVD discs and players are
Rewritable); can be recorded on designed with regional restrictions.
over and over. Before playing a disc, make sure the
DVD+R (DVD ‘plus’ Recordable); disc is for the same zone as your
can be recorded only once. player.
– Do not push on the disc tray or
Playback only: put any objects other than discs on
DVD Video (Digital Versatile the disc tray. It may cause the disc
Disc) player to malfunction.
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
29
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
30
English
You can display JPEG pictures in the
1 Insert a DVD+RW or DVD+R disc. selected roll automatically one after the
If the disc content menu appears on other at adjustable intervals.
the TV
2 Use 1 2 3 4 to navigate within the 1 Insert a JPEG picture disc (CD, DVD+RW,
menu and select a title to play, then press DVD+R).
PLAY 2. If the picture overview appears on
3 To stop playback, press STOP 9. the TV
2 Use 1 2 3 4 to navigate within the
Helpful Hint: menu and select a photo roll folder to
– If the message 'EMPTY DISC' appears play.
on the display panel, this means that there 3 Press PLAY 2 to start the slide show
are no recordings on this disc. playback.
OR
Playing an MP3 CD ● Press OK to show 12 thumbnail pictures.
You can use 1 2 3 4 to select a picture
1 Insert an MP3 CD. file, then press PLAY 2 to begin playback.
If the disc content menu appears on 4 During playback, you can select to zoom,
the TV
flip or rotate the picture.
2 Use 1 2 3 4 to navigate within the
Press EDIT and followed by the
menu and select the album and track to
corresponds colour coded button on the
play, then press PLAY 2.
remote control.
3 During playback, you can press ∞ / § to
5 To stop playback, press STOP 9.
select the next/previous track.
➜ The picture overview appears.
4 To stop playback, press STOP 9.
➜ The number of albums appears on the Supported JPEG picture formats
display.
This DVD recorder can read JPEG
pictures stored on a CD-ROM, Picture
Helpful Hints:
CD, or DVD.
– Only the first session of a multi-session CD
will be played back. File format:
– Further information on the album, track – The file extension has to be '*.JPG' and not
and artist will also be displayed on the TV if '*.JPEG'.
included in the ID tag. – It can only display DCF-standard still
pictures or JPEG pictures e.g. TIFF. It cannot
play back moving pictures, Motion JPEG,
progressive JPEG and other formats, or
pictures in formats other than JPEG, or
pictures associated with sound e.g. AVI-files.
– It may require longer time for the DVD
recorder to display the disc content on the TV
due to the large number of songs/pictures
compiled into one disc.
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
31
Zoom
➜ The languages may be numbered or
Time search
abbreviated, such as “En” for English.
[PLAY] [EDIT] [OK] = PLAY ➜ If the language selected is not available
Audio Subtiltle Repeat Repeat A-B
on the disc, the disc’s default setting
language will be used instead.
3 Press 3 4 to select the setting you want
to adjust. Helpful Hint:
➜ If the selection in the menu is greyed – Some DVDs discs allow subtitle language
out, that means the feature is not changes only via the DVD disc menu. To
available or not possible to change at the access the disc menu, press DISC-MENU.
current state.
➜ Instructions for adjusting the settings
are provided in the following pages.
4 To exit, press SYSTEM-MENU.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
32
English
language This option allows you to enlarge the
This operation works only on DVDs with picture on the TV screen and to pan
multiple soundtrack language or VCDs through the enlarged picture.
with multiple audio channel.
This function can also be accessed via the 1 Press 4 to select { Zoom } and press 2
Red button on the remote control. to enter zoom in mode.
➜ The zoom status bar appears and
1 Press 4 to select { Audio } and press 2 displays the zoom factor.
to enter its options. Zoom 2
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
33
chapter/track backwards
When a disc contains more than one You can fast forward or fast reverse a
track, title or chapter, you can change to a disc at four, eight or thirty two times
different track, title or chapter as follows. normal playback speed.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
34
English
Select shuffle play mode to allow the
Repeat play DVD recorder to randomly select and
You can select a Chapter, Track, Title or play tracks on the disc (MP3 and audio
the entire disc for repeat playback. CDs only).
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
35
Unrecordable pictures
Two different formats of DVD recordable Television programmes, films, video tapes,
discs can be used with this DVD discs, and other materials may be
recorder: copyrighted, it cannot be recorded on
this recorder.
Preferences
overwritten.
Record mode M2x
– Editing can be made on DVD+R discs
Language
as long as they have not been finalised. It Chapters
is also possible to create additional
chapter markings.
– You can also delete unwanted [PLAY] [EDIT] [OK] = PLAY
recording.
– To play a DVD+R disc on other DVD
player, it must be finalised (see page 46 [PLAY] [EDIT] [OK] = PLAY
“Finalising disc (DVD+R)”). After this is
done, no more data can be added to the
disc. 4 Press 3 4 to select the setting for
recording.
➜ Instructions for adjusting the settings
are provided in the following pages.
5 To exit, press SYSTEM-MENU.
English
The recording mode defines the picture Some TV programmes broadcast
quality of recordings and the maximum additional audio language (2-channel
recording time for a disc. During sound). For example, if a programme is
playback, the correct picture quality will available in English and Spanish, with
automatically be selected. Spanish being the second language option.
This function can also be accessed via the You can select the language you want as
REC MODE button on the remote the default setting for recording. This
control. setting will only active if a TV programme
is transmitted in 2-channel sound.
1 Press 4 to select { Record mode } and
When you play the recording, you can
press 2 to enter its options.
play only in the audio you recorded.
2 Press 3 4 to select one of the following
record modes. 1 Press 4 to select { Language } and press
2 to enter its options.
Record Picture Quality Maximum Recording
Mode Time per Disc 2 Press 2 to select one of the options.
➜ { Lang. I } : Original broadcast
M1 High quality (HQ) 1 hour
M2 DVD quality-Standard Play (SP) 2 hours
M2x DVD quality-Standard Play Plus (SP+) 2.5 hours language.
M3
M4
S-VHS quality-Long Play (LP)
VHS quality-Extended Play (EP)
3 hours
4 hours
➜ { Lang. II } : Additional audio language
M6 VHS quality-Super Long Play (SLP) 6 hours (2-channel sound).
M8 VHS quality-Super Extended Play (SEP) 8 hours
3 Press 1 to confirm.
3 Press 1 to confirm.
Inserting chapter markers
Helpful Hint: You can insert a chapter markers within a
– {M1} record mode only available for title during recording. This lets you
model DVDR615 and DVDR616 only. access specific points on the recorded
disc as you would choose a chapter on a
DVD.
To enable direct recording from your TV Use the 'Manual recording' function to
set, make sure that the direct record start recording immediately (e.g., to
mode is turned on. See page 40 “Direct record a TV show already in progress).
Recording” for more information.
1 Turn on the TV power. Select the correct
1 Press 4 to select { Direct record } and Video In channel at the TV.
press 2 to enter its options.
2 Insert a DVD+R(W).
2 Press 2 to select one of the options. ➜ If a DVD+RW was inserted that
➜ { On } : Enable recording directly already contains recordings, press 3 4
from the TV display. to select the location where the
➜ { Off } : Disable direct record recording should be started.
function.
3 Press TUNER on the remote control to
3 Press 1 to confirm. see the TV programmes, then press 3 4
to select the programme number you
Filter mode wish to record.
● To record from additional device, press
For long play or extended play recording,
you can select a suitable filter mode to button {0} on the remote control and
optimise the video recording. The setting followed by 4 to select the correct input
does not influence high quality or channel that matches the socket to which
standard play recording mode. you connected to the DVD recorder.
➜ { CAM 2 } : DV IN socket at the front
1 Press 4 to select { Filter } and press 2 ➜ { CAM 1 } : S-VIDEO or VIDEO and
to enter its options. AUDIO L/R sockets at the front
➜ { EXT 2 } : EXT 2 AUX-I/O Scart
2 Press 2 to select one of the options. socket at the back
➜ { Standard } : Recording quality is as ➜ { EXT 1 } : EXT 1 TO TV-I/O Scart
the recording mode selected. socket at the back
➜ { Sport } : Improve recording of
images that move quickly. Optimise the 4 Press REC 0 to start recording.
picture quality in record mode M3~M8. 5 For recording from external device, you
3 Press 1 to confirm. have to start play on the external device.
● While recording in progress, you can
press OK to insert a chapter marker
wherever necessary.
English
➜ ‘MENU UPDATE’ or ‘CREATE MENU’ automatic turn-off (One
appears on the display panel to indicate
that the DVD recorder is writing the list
Touch Recording)
of contents. Wait until the message
1 Follow the steps 1~3 of “Manual
disappears before removing the
Recording” on page 38.
DVD+R(W).
● If the end of a disc is reached during 2 Press REC 0 on the remote control
recording, recording will stop and the twice to start 30 minutes recording.
DVD recorder will turn off automatically. Each time you press REC 0 you will add
30 minutes to the recording time.
Pausing a recording ➜ The recorder will stop recording at
1 During recording, press PAUSE ;. the designated end time and turn off
➜ You can use this function to avoid automatically.
recording commercials. ● If you wish to delete the recording, press
2 To continue recording, press REC 0. STOP 9 while the display showing the
recording time.
Helpful Hints: ● To check the remaining recording time
– If you insert recordings between existing while recording in progress, press
recordings, check the lengths of the old and SYSTEM-MENU.
new recordings. If the new recording is too
long the subsequent recording (title/chapter)
will be overwritten.
– The length of recording available depends
on the current recording mode and the
amount of time available on the disc.
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
39
The Direct Record function allows you to You can delete a specific recording from
record the TV programme which you are the DVD+R(W).
currently watching when the DVD
recorder is turned off. 1 Insert a recorded DVD+RW or an
unfinalised DVD+R.
1 Turn on the { Direct record } mode in ➜ The Index Picture screen or disc
the recording setting (see page 38). content menu appears on the TV.
2 On the TV, select the programme number 2 Use 1 2 3 4 to select an entry in the
you want to record. menu.
3 With the DVD recorder turned off, press 3 Press the matching colour coded button
REC 0. on the remote control to select
➜ The system will compare the selected { Delete }.
TV channel on the TV set with its stored ➜ The current recording will be deleted.
TV channels. If the same TV channel is ➜ For DVD+RW only, a new recording
found, it switches the DVD recorder to can now be made here.
the corresponding programme number ● To delete all the recordings, see pages
and starts recording. 54~55 “Accessing to the Preferences
4 To stop recording, press STOP 9. options - Disc” and select { Delete all }.
Helpful Hint:
– Do not change channels during the search,
this could affect the tuning of the DVD
recorder.
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
40
English
Use 'Timer Recording’ to automatically
start and stop a recording at a later date/
1 Turn on the TV power. Select the correct
time. The DVD recorder will tune to the Video In channel at the TV.
right programme number and begin 2 Press TIMER on the remote control.
recording at the specified time. ➜ The timer overview appears.
With this DVD recorder, you can pre- ● If the time has not set yet, the { Time
programme up to six recordings within and Date } menu will appear on the
a period of 15 days. screen, see page 27.
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
During timer recording, press STANDBY-ON will stop recording.
41
– Select {Weekly}, {Once} or {Mon-Fri} – Set the timer recording one minute ahead
(Monday to Friday) recordings and press of the programme’s start time. This helps
OK to confirm. ensure the entire programme is recorded as
{ Record mode } the disc requires about 30 seconds to
prepare for recording.
– Select a record mode and press OK to
confirm. See pages 36~37 “Recording – Programme timer recording from {CAM2}
external input source is not possible.
settings - Recording mode”).
{ VPS/PDC }
Programming recording from a
– Select to turn on or off VPS/PDC
Cable Box
mode. For information on VPS/PDC, see
page 41. If you have a Cable Box connected to the
DVD recorder’s Scart connection
● To clear the timer entries, press the ‘EXT 2 AUX-I/O’ (see page 14), follow
matching colour coded button on the the steps described below to program
remote control to select { Clear all }. the recordings.
➜ All the settings in the timer menu are
cleared. 1 Select the channel you want to record at
● To cancel the timer programming, press the Cable Box.
the matching colour coded button on the 2 Programme the recording with the
remote control to select { Cancel }. required information. Follow the steps
➜ The timer overview appears. 1~9 of “Programming Recording” on
pages 41~42.
6 Press the matching colour coded button
on the remote control to select { Store }. { Preset }
➜ The system will store the timer entry – Select { EXT2 } as the input channel
and return to the timer overview screen. and press OK to confirm.
7 To exit, press TIMER. 3 Leave the Cable Box on for the
8 Insert a DVD+R(W). recording.
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
During timer recording, press STANDBY-ON will stop recording.
42
English
matching colour coded button on the
with the ShowView® System
remote control to select { Clear }.
With this programming system, you only
● To cancel the ShowView® programming,
need to enter the ShowView®
press the matching colour coded button
programme number as all the information
on the remote control to select
needed by the DVD recorder for
programming is contained in the { Cancel }.
programming number. ➜ The timer overview appears.
1 Turn on the TV power. Select the correct 5 Press OK to confirm, then press the
Video In channel at the TV. matching colour coded button on the
remote control to select { Store }.
2 Press TIMER on the remote control. ➜ The system will store the timer entry
➜ The timer overview appears. and return to the timer overview screen.
TIMER 11.55
● If the information is missing or not
TIMER OVERVIEW TIMER DETAILS available, you may be asked to enter more
10:55
23:45
CNBCE
Disco E
Weekly
12.04
Start time
Stop time
12:00
18:05
information. Follow the instructions on
21:00 BBC2 E Daily Date 15:07:2004 the TV.
06:00 HBO E 16.04 Repeat Once
08:00 ABCE 13.04 Channel
VPS
199 BBC24
DVD HQ ● If you want to make changes, use
Record Mode Off
3 4 1 2 to select the appropriate entry
field. If required, make changes using 3 4
Delete New Timer Change ShowView or the alphanumeric keypad 0-9.
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
During timer recording, press STANDBY-ON will stop recording.
43
recording recording
1 Turn on the TV power. Select the correct 1 Turn on the TV power. Select the correct
Video In channel at the TV. Video In channel at the TV.
2 Press TIMER on the remote control. 2 Press TIMER on the remote control.
➜ The timer overview appears. ➜ The timer overview appears.
TIMER 11.55 3 Press 3 4 to select a timer programme
TIMER OVERVIEW TIMER DETAILS
which you want to delete.
10:55 CNBCE Weekly Start time 12:00
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
During timer recording, press STANDBY-ON will stop recording.
44
English
You can change disc contents and settings The Index Picture screen shows your
for a recorded DVD+RW or unfinalised recordings on a DVD+RW or DVD+R.
DVD+R from the edit menu screen.
Photo editing is limited to edit the +RW | MY MOVIES STOP 2
MY MOVIES 1-7 00:22:08
information on a roll or album. These M4 3
Static lights
14:01:03
editing changes are available for the DVD The Pianist
01:20:00
recorder, but may not be accessible when 1 The island of lost dream
M4 4
Lord of the Rings, The T 21:02:03
you play the disc on other DVD player. Habla Con Ella
The Ring
00:32:02
M4
5
... 28:06:03
{ Clear }
– Press this button to clear the entry on
the currently selected menu item.
TIPS: No further recording and editing can be carried out on a finalised DVD+R.
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.
45
Helpful Hint:
– If the {Compatible} not available for
selection, it means that the disc is already
compatible.
TIPS: No further recording and editing can be carried out on a finalised DVD+R.
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.
46
English
In the edit video mode, the entire You can choose to hide certain scene for
recording will be played back regardless playback (e.g. commercial skipping) or
of whether they are hidden or not. make them visible again.
Disc bar
TIPS: No further recording and editing can be carried out on a finalised DVD+R.
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.
47
picture)
1 Start playback a recorded DVD+RW or
an unfinalised DVD+R. 1 Start playback a recorded DVD+RW or
2 Press EDIT on the remote control. an unfinalised DVD+R.
3 Press the matching colour coded button 2 Press EDIT on the remote control.
on the remote control to select 3 Press the matching colour coded button
{ Chapter }. on the remote control to select { Title }.
➜ The chapter editing menu appears. ➜ The title editing menu appears.
+RW | SHREK | EDIT MODE PAUSE
+RW | SHREK | EDIT MODE PAUSE
00:01:02
00:01:02
00:00 00:00
[EDIT] = Exit
[EDIT] = Exit
Merge Back Split Hide Divide Append Back Index Pic.
4 Press the matching colour coded button 4 Once you have found the scene that you
on the remote control to make your want to use for title editing, press the
editing. matching colour coded button on the
remote control to make your editing.
{ Merge }
– Select this to merge the current { Divide } - for DVD+RW only
chapter with the chapter before it. – Select this to divide the current title
If the two chapters were hidden, then the into two new titles. Each of these titles is
joined chapter will also be hidden. If only characterised by its own index picture.
one of the chapters is hidden, then the Warning! Once a title is divided, it
joined chapter will not be hidden. cannot be reversed.
{ Back } { Back }
– Select this to return to the previous – Select this to return to the previous
screen. screen.
{ Hide }
– Select this to hide the current chapter.
TIPS: No further recording and editing can be carried out on a finalised DVD+R.
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.
48
English
– Select this to append record to the
existing recording from the position of The Photo (JPEG picture) recordings on a
the playback. Continue steps 5~7. DVD+R(W) are limited to edit the
information.
For append recording only: The editable information items are :
5 Press 3 4 to select the input channel to – Title of the currently selected item
append : { preset programme number }, – Album edit name
{ EXT1 }, { EXT 2 } or { CAM1 }. – Photo edit date
6 Press REC 0 to start append recording. 1 Insert a recorded DVD+RW or an
Warning! Once the recording started, unfinalised DVD+R.
any prior recording from the point of the
playback onwards will be overwritten. 2 Use 1 2 3 4 to select an entry in the
menu.
7 To stop append recording, press
STOP 9. 3 Press EDIT on the remote control.
➜ The edit menu appears.
Deleting chapter markers 4 Press 3 4 to change the character/
You can choose to delete all the chapter number or make an entry by using the
markers in the current recording. alphanumeric keypad 0-9.
➜ Press 1 2 to move to the previous or
1 Follow the steps 1~3 of “Video editing” next entry field.
on page 47.
5 Press OK to confirm the changes.
2 Press the matching colour coded button ➜ The info panel is now updated.
on the remote control to select { No
Chapters }. During photo (JPEG picture) playback,
you can change the photo display.
However, the changes cannot be stored in
the disc.
1 During playback, press EDIT.
2 Press 2 to select { Photo options } on
the screen, then press 4 to select
{ Filter } or { Colour Adjust }.
3 Press 2 to access to the menu, then press
3 4 to select the available setting.
Helpful Hint:
– Editing of the audio content is not possible.
TIPS: No further recording and editing can be carried out on a finalised DVD+R.
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.
49
You can view and manage possible In the Media Browser mode, a number of
contents within your discs by using an functions are available via the colour
on-screen console called the Media coded buttons on the remote control.
Browser.
colour coded buttons
1 Insert a disc into the DVD recorder. (red, green, yellow, blue)
➜ The Index Picture screen or disc
content menu appears on the TV.
(example of an DVD) (example of an DVD+RW)
DVDV/Title1
TITLES INFO
+RW | MY MOVIES
MY MOVIES 1-7
STOP
00:22:08
These functions are displayed in the
Title1
Title2
LengthE
DateE
0:1:14
0:0:0
Static lights
The Pianist
M4
14:01:03
01:20:00
bottom of the menu wherever applicable.
The island of lost dream
Child Lock M4
Title3
Title Name Title 1 Lord of the Rings, The T 21:02:03
Title4 Habla Con Ella 00:32:02
SOURCE TITLES
DVDV/Title1
TITLES INFO
{ Select }
Disctray DVD-V
Title1
Title2 = Title1
Title2
LengthE
DateE
0:1:14
0:0:0
– Add to the selection.
Title3 Child Lock
Title3
Title4 Title Name Title 1
Title5
Title4
Title5 Short Content Description
{ Select All }
Title6
Helpful Hint:
– The information showed on the display
panel varies for different types of media.
TIPS: Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.
50
English
The Media Browser allows you to view ➜ The 12 roll thumbnails picture screen
the JPEG pictures discs or playback as a appears.
slide show or store them in an album. DVD / Photo / Rolls / Roll KYZ 06/06/2004
TIPS: Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.
51
3 Press OK to display the picture overview. 3 Press the matching colour button on the
➜ The 12 roll thumbnails picture screen remote control to select { Delete }.
appears.
Deleting picture in an album
DVD / Photo / Albums / Album XYZ 06/06/2004
TIPS: Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.
52
English
You can adjust the various slide show (DVD+RW)
settings to your individual needs. You can choose to protect the recorded
title on an DVD+RW in order to prevent
1 Press BROWSER on the remote accidental loss of recordings.
control.
➜ The disc content menu appears. 1 Insert a recorded DVD+RW
2 Press 1 2 to select photo roll/album 2 Press BROWSER on the remote
menu and press 3 4 to select a desired control.
photo roll/album folder. ➜ The disc content menu appears.
3 Press PLAY 2 to start slide show play. 3 Press 3 4 to select a recorded title.
Album 001/Photo 001 4 Press the matching colour coded button on
the remote control to select { Protect }.
● If you want to overwrite or edit the
protected title, press the matching colour
coded button to select { Unprotect }.
{ Zoom }
– Select this to activate zoom mode.
In zoom mode,
– Use 1 2 3 4 to pan through the
zoomed image.
– Press the matching colour buttons
{ Zoom Out } or { Zoom In } repeatedly
to select the desired zoom ratio
(2x, 4x, 8x).
– Select { End } to exit zoom mode.
{ Repeat }
– Select this to toggle between repeat
on and off.
{ Speed Down } / { Speed Up }
– Select this to change the slide show
speed :
{ SLOW } – 10 seconds interval
{ MEDIUM } – 5 seconds interval
{ FAST } – 3 seconds interval
TIPS: Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.
53
Sound Mode
Night Mode
DVD-VIDEO-TITLE 04|CO1 STOP
Recording Sound Disc Access
Preferences
Set-up
{ Sound mode }
[PLAY] [EDIT] [OK] = PLAY
You can select from the following settings
how sound will be played back by devices
connected to the analogue outputs (L/R
4 Press 2 repeatedly to select one of the AUDIO OUT).
options from { Preferences } and press 4 – { Stereo } : To hear sound from the left and
to select a setting you want to adjust. right audio channels. Use this setting when
➜ Instructions for adjusting the settings the DVD recorder is connected to a stereo
are provided in the following pages. TV.
– { Surround } : For audio device that is
5 Press 2 to enter its options and use compatible with Dolby Surround. Dolby
1 2 3 4 to make your selection. Digital and MPEG-2 multi-channel are
➜ If the selection in the menu is greyed mixed to a Dolby Surround-compatible
out, that means the feature is not two-channel output signal.
available or not possible to change at the
{ Night mode }
current state.
Allows you to optimise the sound
6 Press 1 to confirm. dynamics at low volume. This causes less
disturbance in quiet environments. This
7 To exit, press SYSTEM-MENU. setting only functions with Dolby Digital
Audio on DVDs.
– { On } : Select this to level out the volume.
High volume outputs will be softened and
low volume outputs are brought upward to
an audible level.
– { Off } : Select this when you want to enjoy
the surround sound with its full dynamic
range.
English
DVD-VIDEO-TITLE 04|CO1 STOP DVD-VIDEO-TITLE 04|CO1 STOP
Disc Features
Preferences Preferences
Dealer demo
options
DVD-VIDEO-TITLE 04|CO1 STOP
Set-up
Second RC
control. OSD
PBC
DVD-VIDEO-TITLE 04|CO1 STOP
System Time-date Analogue Ch. Video output
Set-up
{ Eco Mode }
When switching the DVD recorder to
standby mode, the display panel will turn
blank to save power.
4 Press 2 repeatedly to select one of the – { On } : Turn on Eco mode.
options from { Set-up } and press 4 to – { Off } : Turn off Eco mode.
select a setting you want to adjust.
➜ Instructions for adjusting the settings { Auto standby }
are provided in the following pages. The system will automatically turn on to
standby mode if you do not press any
5 Press 2 to enter its options and use buttons within 15 minutes after a disc has
1 2 3 4 to make your selection. stopped playing or in Browser mode.
➜ If the selection in the menu is greyed This is a power-saving feature.
out, that means the feature is not – { On } : Turn on Auto standby mode.
available or not possible to change at the – { Off } : Turn off Auto standby mode.
current state.
{ Second RC }
6 Press 1 to confirm. Allows you to control the DVD recorder
7 To exit, press SYSTEM-MENU. with a second remote control (not
supplied).
– { On } : Enable second RC control.
– { Off } : Disable second RC control.
English
Select the level of On-screen display
information. DVD-VIDEO-TITLE 04|CO1 STOP
Set-up
display during use.
– { Reduced } : The help text and colour TV shape E
Black level
button bar will remove from the display.
Horizontal
– { Normal } : The help-text will remove
from the menu.
{ Display }
Allows you to change the brightness of
the DVD recorder display panel. { TV shape }
– { Bright } : Normal brightness.
The picture shape can be adjusted to fit
– { Dimmed } : Medium brightness. your TV.
– { Off } : Turn off the display. – { 4:3 letterbox } :
For a 'wide-screen' display
{ PBC } - for VCD only with black bars on the top
Play Back Control allows you to play and bottom.
Video CDs (2.0) interactively, following – { 4:3 panscan } :
the menu on the display. For a full-height
picture with the sides
– { On } : The index menu (if available) will
trimmed.
appear on the TV once you insert a VCD.
– { 16:9 } : For wide-
– { Off } : The VCD will skip the index menu
screen TV (frame
and playback directly from the beginning.
ratio 16:9).
{ Version Info }
It provides the software version { Black level }
information for online upgrade. Adapts the colour dynamic for NTSC
disc.
– { Normal } : Normal colour contrast.
Time-date – { Enhance } : Improve the colour
For more information on this menu, contrast and brighten the picture of NTSC-
please see page 27 “Setting the Time and compatible DVD.
Date”.
{ Horizontal }
Allows you to adjust the horizontal
Analogue channels position of the picture on your TV
For more information on this menu, screen.
please see pages 23~27 “TV Channel – Press 1 2 to scroll the slider to the left or
Programming”. right. When you are satisfied with the
position of the picture, press 4.
Audio output
After connecting the DVD recorder to
your TV and other devices, you may need
to change the digital output setting.
Adjust the Digital Output only if you used
the DVD recorder’s COAXIAL socket.
Set-up
Digital output
{ Digital output }
– { All } : Select this if you use the
COAXIAL socket to connect the DVD
recorder to a stereo receiver that has a
built-in Multi-Channel decoder.
– { PCM } : Select this if the connected
audio equipment is not capable of decoding
multichannel audio. Dolby Digital and
MPEG-2 multi-channel signals are converted
to PCM (Pulse Code Modulation).
– { Off } : Select this to deactivate the digital
audio output. For example, if you use the
AUDIO OUT sockets to connect the DVD
recorder to a TV or Stereo system.
English
Access Control limits viewing of discs enter your new four-digit pin code. You
that exceed the limits you set. Philips must enter the same pin code a second
cannot guarantee the availability of Access time to confirm it.
Control with all discs, and therefore ➜ To cancel your change, press 4 to
denies any liability associated with select { Cancel } and press OK to
unintended watching of discs. confirm.
Pin Code
****
Cancel 6 Press 2 to select { On } or { Off } setting
and press 1 to confirm.
➜ If you turn on the child lock feature,
you will need to enter the four-digit pin
code in order to play locked discs.
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
59
in browser mode;
1 Press the BROWSER on the remote
control.
➜ The disc content menu appears.
2 Press the matching colour coded button
on the remote control to select
{ ChildLock }.
➜ The disc is now locked. You must
enter the four-digit pin code the next
time when you insert the disc.
Helpful Hint:
– Two-sided DVDs and multi-volume discs
may have a different ID for each side/
volume. To completely unlock these discs, you
must authorise each side/volume separately.
Authorising discs
You can enable playback of a locked disc
by entering the four-digit pin code,
however, it will only allow play once.
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
60
English
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem Solution
The message “IS THE TV – The DVD recorder will not operate until you complete the first
ON?” appears on the display installation. Read chapter “Installing the DVD Recorder - First
panel. Installation” for details.
The buttons on the DVD – The DVD recorder may be in Dealer mode, all buttons on the
recorder do not work. front of the DVD recorder are locked. To deactivate the dealer
mode :
1) Disconnect the power cord from the power outlet.
2) Press and hold STOP button and OPEN/CLOSE on the front
of the recorder while you reconnect the power cord to the
power supply.
3) As soon as the time or '00:00' appears on the display (within
6-10 seconds), release the buttons.
– There is a technical problem. Disconnect the DVD recorder
from the power outlet for 30 seconds, then connect again. If the
DVD recorder still will not operate, then reset it to the default
factory settings :
1) Disconnect the DVD recorder from the power outlet.
2) Press and hold down STANDBY-ON button on the front of
the recorder while reconnecting to the power outlet.
3) Release STANDBY-ON button when “IS THE TV ON?”
appears on the display. All the information stored in the
memory (programmes, time) will be cleared. Complete the
first installation again and reset any items you have adjusted
during your use of the recorder.
Remote control does not – Aim the remote control directly at the sensor on the front of the
work. DVD recorder (not towards TV). If the DVD recorder receives a
signal from the remote control, icon D will appear on the
display.
– Remove any obstacles between DVD recorder and the remote
control.
– Batteries are weak, replace the batteries.
– Press DVD-MODE on the remote control.
61
Disc will not play. – Insert the disc with the label facing up.
– The child lock is on. Read chapter “Setting Access Control -
Activating/Deactivating the child lock” for details.
– Wrong region code. The DVD must be coded for ALL regions or
Region 2 in order to play on this DVD recorder.
– There is no recording on the disc or wrong disc type. Read
chapter “Playback - Playable discs” for details.
– Make sure the disc is not scratched or warped. Clean the disc or
replace a new one.
– Check if the disc is defective by trying another disc.
No picture. – Turn on your TV and set to the correct Video In channel. Change
the TV channel until you see the DVD screen. Read chapter
“Connecting to TV - General” for details.
– Check the video connection between the DVD recorder and the
TV.
The picture is distorted or – The disc does not match with the TV colour system standard
black and white during (PAL/NTSC).
playback. – The disc is dirty, clean the disc.
– Sometimes a small amount of picture distortion may appear. This
is not a malfunction.
– If you set the Record Mode to a low-quality speed, change to a
higher-quality speed after you finish recording. Leaving the DVD
recorder set to a low-quality speed may affect the picture quality
when playing DVDs later. Read chapter “Recording - Recording
settings” for details.
– The recording can be made in colour only when the TV channels
or the connected additional device sends a colour signal. In some
situations, programmes that are broadcast in black and white
cannot be recorded.
Distorted sound coming – Do not connect any cables from the DVD recorder to the
from a connected hi-fi 'Phono' input of your amplifier.
amplifier. – Do not connect the DVD recorder’s Coaxial DIGITAL AUDIO
OUT socket to an analogue socket (red/white) on the connecting
devices.
No sound. – Check the audio connections, the red and white sockets. Read
chapters “Connecting to TV” or “Connecting to Additional
Devices” for details.
– You cannot hear MP3 playback if you are using the Coaxial
DIGITAL AUDIO OUT socket for sound from the DVD
recorder.
– Set the Analogue output or Digital output correctly, based on the
equipment you connected to the DVD recorder. Read chapter
“System Menu - Setup” for details.
62
English
Recordings are not – The TV channel you want to record is not stored or you selected
occurring as scheduled. the wrong programme number. Check TV channels stored.
New recordings cannot be – If you adjust the clock after you set a timer recording, reset the
made. timer recording.
– If the DVD recorder cannot read the disc, you cannot record.
– You cannot use the DVD recorder to duplicate copyrighted
materials (DVDs or videotapes) onto a DVD+RW/+R, “COPY
PROTECT” will be displayed.
– A finalised DVD+R has been inserted. Change disc.
The wrong TV channel was – ‘VPS/PDC’ is turned on but ‘VPS/PDC time’ is wrong. Enter the
decoded (recorded) after exact ‘VPS/PDC time’.
you programmed a 1) Enter the ShowView programming number of the desired TV
recording using the channel.
ShowView system. 2) Press OK to confirm.
3) Check the channel number in the {Ch.} input field. If this does
not correspond to the desired TV channel, select this entry
field and change the channel number.
4) Press OK to confirm.
A DVD+RW or DVD+R – If a recording is too short, it is possible that a DVD player cannot
recorded on this DVD detect it. Please observe the following 'minimum recording
recorder will not play on a times'. Recording mode : {M1} – 5 minutes, {M2}– 10 minutes,
DVD player. {M2x} – 13 minutes, {M3} – 15 minutes, {M4} – 20 minutes,
{M6} – 30 minutes, {M8} - 30 minutes.
– Some DVD players cannot playback DVD+RW recordings.
You can solve this problem by using a special function :
1) Press OPEN/CLOSE on the DVD recorder to open the disc
tray.
2) Insert the disc but do not close the tray.
3) Hold down the number button {2} on the remote control until
the tray closes. The disc is modified.
4) If this fails to produce the desired result, repeat the procedure
using the number button {3} on the remote control.
5) You can restore the disc to its original condition by pressing
and holding number button {1}.
Warning! There is a risk that you can no longer play the disc on
other DVD players after the following procedure. Therefore,
apply this function with particular care.
63
The message 'Disc contains – This message may appear if you insert a disc that was not
unknown data' appears. finalised. DVD+R's that have not been finalised are very sensitive
to fingerprints, dust, or dirt. This may cause problems during
recording. To use the disc again, do the following :
1) Make sure that the surface of the disc is clean.
2) Press OPEN/CLOSE on the DVD recorder to open the disc
tray.
3) Insert the disc but do not close the tray.
4) Hold down button number {5} on the remote control until the
tray closes. The DVD recorder will start the repair process.
5) If the disc is recovered, the Picture Index screen will appear.
The index screen flickers – You can finalise the disc using the following function:
when a DVD+R is inserted. 1) Press OPEN/CLOSE on the DVD recorder to open the disc
tray.
2) Insert the disc but do not close the tray.
3) Hold down button number {4} on the remote control until the
tray closes. ‘FINALISING' appears on the display panel.
4) If finalising has been successful, the Picture Index screen will
appear.
Picture is fuzzy and – This happens if you try to copy DVDs or video cassettes that
brightness varies when have been copy-protected. Even though the picture on the TV is
copying DVD Video discs or fine, but the recording on a DVD+R(W) is faulty. This
prerecorded video cassettes. interference is unavoidable with copy-protected DVDs or video
cassettes.
– The DVD+R(W) has recording lifetime, please change a new disc
for recording.
The message ‘NO SIGNAL’ – Check that the cable is plugged in firmly.
appears. – If a recording is made from a video recorder, change the tracking
on the video recorder.
– The DVD recorder may not be able to recognise the video input
signal if this signal is poor or does not comply with relevant
standards.
64
English
The message 'Recording of – Select { Switch now } to switch the DVD recorder to standby
<XX> will start within 1 mode. A programmed timer recording will only start recording if
minute' appears. the DVD recorder is in standby mode.
– Select { Suspend } will suspend the timer recording.
– Select { Cancel recording } will cancel the timer recording.
The message 'Insert – Either no disc was inserted or a disc was inserted that cannot be
recordable disc' appears. used for recordings. Insert a disc that can be recorded upon.
Locate on the disc the right position for the recording. Press
STOP button. Turn off the DVD recorder by pressing STANDBY-
ON button.
The message 'Maximum – It has reached the maximum programmed, no more recordings
number of timers reached' are allowed. Press TIMER button, select the programmed
appears. recording (TIMER block) you want to check or clear using 3 4
button.
The message 'Collision' – The timer recording overlaps with another timer recording.
appears. – If you ignore this warning, the programmed recording with the
early start time will start first.
The second recording will then lack the beginning.
– Change the information for one of the two recordings.
– Delete one of the two recordings.
65
appear on your DVD recorder display: The disc tray cannot be opened or closed due
to some mechanical obstruction.
● COMPATIBLE
The DVD Recorder is busy making changes to
make the disc DVD-compatible.
● 00:00 ● CLOSING
Multifunction display/text line Disc tray is closing.
– Title/track number ● COPY PROT
– Total/elapsed/remaining title/track time The DVD/video cassette you are trying to
– Disc/title name copy is copy-protected.
– Error or warning messages
– Additional information regarding the disc ● DISC ERR
– TV channel number or source of video An error occurred when writing the title. If
– Clock (This is displayed in Standby mode). this happens often, please clean the disc or use
– TV programme title a new one.
● |||||||||||||||||||||||||||||| ● DISC FULL
– Disc bar: Displays the current position on Disc is full. There is no room for new
the disc. recordings.
– Play/Record: The single flashing segment
● DISC UPDATE
represents the current position of the disc
– Updating of disc is done after the editing is
pointer.
complete.
– Pause: Indicated by the flashing segment on
– Entire disc is being erased.
both sides of the current position.
– Stop: Indicated by the flashing segment at ● DISC WARN
the current position. An error occurred when writing the title. The
recording will continue, but the error will be
● ¡
skipped.
Tuner is selected as visible source.
● EMPTY DISC
● Inserted disc is new or has been completely
Disc is the current active source. erased (no recordings present).
● TV ● DISC UPDATE
Modulator is turned off. The antenna signal (RF Entire disc is being erased.
signal) is only connected to the TV when the
modulator is turned off. ● FINALISE
The DVD+R disc is being finalised. The
● D progress bar on the LED shows the status of
Remote control command for the DVD the finalisation process.
recorder has been received.
● EMPTY TITLE
● X TIMER An empty title was selected.
A timer recording has been programmed or is
active. ● INFO DVD
Information on the inserted DVD is displayed
● !SAT on the screen.
The DVD recorder is prepared for satellite
recording. ● CREATE MENU
After the first recording has been successfully
complete on a new disc, the menu structure is
created.
66
English
The DVD Recorder is currently in the first The disc is being prepared after the menu
installation mode. Turn on your TV and read structure has been created.
the section, 'First installation', in the chapter
'Installing the DVD Recorder'.
● PROTECTED
Title is copy-protected and cannot be
● MAX TITLE recorded.
The maximum number of titles has been
reached for the disc. Each disc can have a
● READING
maximum of 49 titles. Disc is being recognised by the DVD recorder.
67
Rear Connections
– Scart 1 (cvbs, S-video/rgb out)
– Scart 2 (cvbs, S-video/rgb in, decoder)
– S-video out
– Video out (cvbs)
– Audio left/right out
– Digital audio out (coaxial)
– RF antenna in
– RF TV out
– Mains
68
English
numbers. Analogue sound varies, while digital A collection of compression systems for digital
sound has specific numerical values. These jacks audio and video.
send audio through two channels, the left and Multichannel: DVDs are formatted to have each
right. sound track constitute one sound field.
Aspect ratio: The ratio of vertical and horizontal Multichannel refers to a structure of sound tracks
sizes of a displayed image. The horizontal vs. having three or more channels.
vertical ratio of conventional TVs. is 4:3, and that of PBC: Playback Control. Refers to the signal
wide-screens is 16:9. recorded on video CDs or SVCDs for controlling
AUDIO OUT Jacks: Red and white jacks on the playback. By using menu screens recorded on a
back of the system that send audio to another Video CD or SVCD that supports PBC, you can
system (TV, Stereo, etc.). enjoy interactive playback and searching.
Chapter: Sections of a picture or a music piece PCM: Pulse Code Modulation. A digital audio
on a DVD that are smaller than titles. A title is encoding system.
composed of several chapters. Each chapter is Region code: A system allowing discs to be
assigned a chapter number enabling you to locate
played only in the region designated. This unit will
the chapter you want. only play discs that have compatible region codes.
Digital: Sound that has been converted into You can find the region code of your unit by
numerical values. Digital sound is available when looking on the product label. Some discs are
you use the DIGITAL AUDIO OUT COAXIAL or compatible with more than one region (or ALL
OPTICAL jacks. These jacks send audio through regions).
multiple channels, instead of just two channels as
S-Video: Produces a clear picture by sending
analogue does. separate signals for the luminance and the colour.
Disc menu: A screen display prepared for You can use S-Video only if your TV has an S-Video
allowing selection of images, sounds, subtitles, In jack.
multi-angles, etc recorded on a DVD. Surround: A system for creating realistic three-
Dolby Digital: A surround sound system dimensional sound fields full of realism by
developed by Dolby Laboratories containing up to arranging multiple speakers around the listener.
six channels of digital audio (front left and right, Title: The longest section of a movie or music
surround left and right, centre and subwoofer). feature on DVD. Each title is assigned a title
DTS: Digital Theatre Systems. This is a surround number, enabling you to locate the title you want.
sound system, but it is different from Dolby Digital. VIDEO OUT jack: Yellow jack on the back of
The formats were developed by different the DVD system that sends the DVD picture video
companies. to a TV.
Index Picture Screen: A screen that gives an
overview of a DVD+RW or DVD+R. An Index
Picture represents each recording.
JPEG: A very common digital still picture format.
A still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite of
its high compression ratio.
MP3: A file format with a sound data compression
system. “MP3” is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio Layer 3.
By using the MP3 format, one CD-R or CD-RW
can contain about 10 times more data then a
regular CD.
69
70
English
LIBYA SECAM B SECAM G 5
LITHUANIA PAL D (was SECAM) PAL K 5
LUXEMBOURG PAL B/SECAM L PAL G/SEC L 2
MADAGASCAR SECAM K1 5
MADEIRA PAL B
MALAGASY SECAM K1
MALAWI PAL B PAL G 5
MALAYSIA PAL B 3
MALI SECAM K1 5
MALTA PAL B PAL H 2
MARTINIQUE SECAM K1
MAURITANIA SECAM B 5
MAURITIUS SECAM B 5
MEXICO NTSC M NTSC M 4
MONACO SECAM L 2
MONGOLIA SECAM D 5
MOROCCO SECAM B 5
MOZAMBIQUE PAL B 5
NAMIBIA PAL I 5
NEPAL PAL B
NETHERLANDS PAL B PAL G 2
NETH. ANTILLES NTSC M NTSC M
NEW CALEDONIA SECAM K1
NEW GUINEA PAL B PAL G 4
NEW ZEALAND PAL B PAL G 4
NICARAGUA NTSC M NTSC M 4
NIGER SECAM K1 5
NIGERIA PAL B PAL G 5
NORWAY PAL B PAL G 2
OMAN PAL B PAL G 2
PAKISTAN PAL B 5
PANAMA NTSC M NTSC M 4
PARAGUAY PAL N PAL N 4
PERU NTSC M NTSC M 4
PHILIPPINES NTSC M NTSC M 3
POLAND PAL D PAL K 2
PORTUGAL PAL B PAL G 2
PUERTO RICO NTSC M NTSC M 1
QATAR PAL B 2
REUNION SECAM K1
RUMANIA PAL D PAL K 2
RUSSIA SECAM D SECAM K 5
RWANDA SECAM K1 5
SABAH/SAWARA PAL B
ST. KITTS NTSC M NTSC M
SAMOA (US) NTSC M 1
SAUDI ARABIA SECAM-B/PAL-B SECAM G 2
SENEGAL PAL 5
SEYCHELLES PAL B PAL G 5
SIERRA LEONE PAL B PAL G 5
SINGAPORE PAL B PAL G
SLOVAK REPUBLIC PAL PAL 2
SOMALIA PAL B PAL G 5
SOUTH AFRICA PAL I PAL I 2
SPAIN PAL B PAL G 2
SRI LANKA PAL B 5
SUDAN PAL B PAL G 5
SURINAM NTSC M NTSC M 4
SWAZILAND PAL B PAL G
SWEDEN PAL B PAL G 2
SWITZERLAND PAL B PAL G 2
SYRIA SECAM B 2
71
DVDR610
DVDR615
DVDR616
CLASS 1
LASER PRODUCT
SgpJP-0440-00-1
72