The document is a cost sheet for a job producing a part from aluminum. It lists the raw material as aluminum weighing 320 grams and costing 41 rupees. It then lists the costs for cutting, lathe work, surface grinding, and cylindrical grinding, totaling to 101 rupees. Additional costs include 3% rejection at 3.03 rupees, overhead and profit of 15% adding 15.6 rupees, and a low volume allowance of 5.98 rupees, bringing the final part cost to 125.62 rupees.
The document is a cost sheet for a job producing a part from aluminum. It lists the raw material as aluminum weighing 320 grams and costing 41 rupees. It then lists the costs for cutting, lathe work, surface grinding, and cylindrical grinding, totaling to 101 rupees. Additional costs include 3% rejection at 3.03 rupees, overhead and profit of 15% adding 15.6 rupees, and a low volume allowance of 5.98 rupees, bringing the final part cost to 125.62 rupees.
The document is a cost sheet for a job producing a part from aluminum. It lists the raw material as aluminum weighing 320 grams and costing 41 rupees. It then lists the costs for cutting, lathe work, surface grinding, and cylindrical grinding, totaling to 101 rupees. Additional costs include 3% rejection at 3.03 rupees, overhead and profit of 15% adding 15.6 rupees, and a low volume allowance of 5.98 rupees, bringing the final part cost to 125.62 rupees.