Professional Documents
Culture Documents
Umpth101c PDF
Umpth101c PDF
/ [Full/Half/Narrow/Chain Print]
1. Size 14. Style key Dimensions:
(W x D x H)
Approx. 4.4" × 8.2" × 2.4"
(Approx.110(W) × 208(D) × 59(H)mm)
1 Start your machine. Accessories 2 Press / to select the settings.
2
1
5
6
5.
6.
Width
Style
18.
19.
Menu key
Clear key Power supply:
(without batteries and tape cassette)
Six AAA alkaline batteries (LR03)
2 Set the language.
Full
ABC
Half
ABC
Narrow
ABC Cutter Unit: TC-4 (replacement)
Medium
5
Six AAA Ni-MH batteries (HR03)*1 Small
2 7. Label Length 20. Print key
1" 1"
0.47" 0.47" 0.16" 0.16" If the cutter blade becomes dull after repetitive use and the tape cannot
7 / [Language] / (25 mm)
(12 mm) (4 mm) 6
3 If a specific label length has been 21. Enter key Tape cassette: Brother TZe tape (width) be cut cleanly, replace with a new cutter (stock no. TC-4). You may Style Normal
8 selected, also appears. [English/Español/Français/Hrvatski/Italiano/Magyar/ [Chain Print]
4 18 22. Auto Designs key 0.13" (3.5mm), 0.23" (6mm), obtain this item from an authorized Brother reseller. 7
19 8. Guidance (left, right) 23. Frame key 0.35" (9mm), 0.47" (12mm) Nederlands/Norsk/Polski/Português/Portug. (BR)/ For creating a label containing text in various styles. Bold
9
9. Power key Română/Slovenski/Slovenský/Suomi/Svenska/Türkçe/ X Replacing the Cutter Unit
10 20 24. Accent key 1. Enter text. 8
11 10. Cursor key : Right *1 Visit us at http://solutions.brother.com/ for the latest 1. Pull out the two sections of the cutter unit (green) in the Outline
25. Space key Čeština/Dansk/Deutsch] .
11. Cursor key : Left information about the recommended batteries. 2. Press , then [Copies: ] appears. direction of the arrows shown in the illustration.
9
12 21
13
14
22
23
12.
13.
Backspace key
Size key 3 Set the unit of measurement. 3. Press / or enter number with number keys to
select the number of copies.
Shadow
10
The default setting is [inch]. Italic
15 Should you encounter any problems with your product, 4. Press . Printing will start, and then the message "OK 11
NOTE please do not return your product to the store! to Feed?" appears. I+Bold
/ [Unit] 12
• The LCD shows one row of 12 characters; however, the text that After referring to the User's guide, if you still need
assistance, call Brother Customer Service at: / [inch/mm] . 5. Press to enter more text. I+Outline
you enter can be up to 80 characters in length. 13
• While selecting the settings, press the Space key to go back to Voice: 1-877-BROTHER 6. Clear the text, enter the text for the next label, and then I+Shadow
the default item. Web: www.brother-usa.com NOTE press . 14
Fax: 1-901-379-1210 Vertical
• The print preview is a generated image of the label, and may • The machine automatically turns off if no keys are pressed within 7. When the message "OK to Feed?" appears after the last
If you need to locate a service center, please call five minutes. Only the highlighted symbols can be used in DECO MODE.
differ from the actual label when printed. 1-877-BROTHER or visit us at www.brother-usa.com label is printed, press . Width Normal
16 24 • To cancel any operation, press . To enter Pictograph symbols :
• Label length shown on LCD may slightly differ from the actual 8. After the tape is fed, press the cutter lever to cut off the 2. Install a new cutter unit. Push it in until it snaps into place. +
17 25 label length when printed. ×2
chain of labels. Do not touch the cutter blade directly with your fingers. / [Pictograph] / Select category
× 1/2 / Choose a symbol
NOTE
The selected symbol is displayed as "A1" in the text input screen.
• When [Half] or [Narrow] is set, the displayed label length is the
length from the printed dots ( ) to the end of the label.
Resetting the P-touch For example, a car is displayed as in the screen.
Short Cut Keys
Troubleshooting LCD display Label image You can reset the P-touch labeler when you want to initialize the 1 2 3 4 5 6 7 8 9
The maximum number of characters (80 characters*) The machine has “locked and then press to turn the P-touch back on.
have already been entered. C
The batteries are weak. The display stays blank • Check that the batteries are correctly up” (i.e., nothing happens
Low Battery!
If using AAA alkaline batteries: Replace them with new
ones.
Text Full! *50 characters - for Auto Designs function and DECO
MODE
after you have turned on inserted. when a key is pressed,
even though the machine
• Refer to “Resetting the P-touch”. Half ABC
1.6" 2 Release and .
Margin
D
the machine. • If the batteries are weak, replace them. (41 mm)
The P-touch labeler turns on with the internal memory reset. File
If using Ni-MH batteries: Charge them fully. is on.)
With the DECO MODE function: E
Since the number of entered characters exceeds the When the label is printed Narrow ABC
Battery Dead The installed batteries are running low. NOTE Cable
label length, reduce the text. out, the margin(space) is • See “Setting Margin” in this users guide • The batteries may be weak. Replace 1"
F
and select [Half] or [Narrow] to have The power turns off when them. (25 mm) All text, settings and stored files are cleared.
An invalid number was entered as the label length. Text Limit! All other functions: too large on both sides of smaller margins for your label.
Invalid! (This is not displayed in Auto Designs function.) Since the number of entered characters exceeds the the text. you try to print. • Check that the batteries are correctly Deco mode
inserted. • To print more than 1 copy of a label with minimum margin, set G
label length, reduce the text, or select [Auto] as the
label length. the margin to [Narrow].
• You tried to print a text file when there is no data • Check that the tape cassette has been Declaration of Conformity Preview
The machine does not • Check that the end of the tape feeds • When [Chain Print] is set, feed the tape before using the cutter H
stored in the memory. inserted correctly. The tape does not feed (Europe/Turkey only)
Printing on 0.13" (3.5mm) tape with invalid Frame print, or the printed under the tape guides. otherwise a part of the text may be cut off. Also, cut along the
• If the tape cassette is empty, replace it. properly or the tape gets Feed
• is pressed when no text is entered. characters are not formed • The cutter lever is used while printing. Do printed dots ( ) with scissors so the text is centered in the label. We, BROTHER INDUSTRIES, LTD I
No Frame OK? setting ON. (Select to print with no Frame, • Check the cassette cover is properly stuck inside the machine. not touch the cutter lever during printing.
No Text! • You tried to select Text Preview or Cable Label when properly. closed. *Feed the tape before using the cutter. 15-1, Naeshiro-cho, Mizuho-ku,
no text is entered. to cancel.) Nagoya, 467-8561, Japan Unit J
All text and format • Do not pull the tape since this may damage the tape cassette.
• The batteries may be weak. Replace declare that this product is in compliance with the essential
• was pressed when no text was entered while Feeding tape after printing when [Chain Print] is them. settings need to be Language K
OK to Feed? • Press and select [Text&Format]. requirements and other relevant provisions of Directives
using the DECO MODE or Auto Designs function. selected. Refer to “Setting Margin”. The setting has cleared • When power is disconnected for more cleared to create a new
on its own. than three minutes, all text & formats in label. 2004/108/EC. L
Only 0.47"(12mm) tapes are available for use with the display will be lost. Language and Unit The Declaration of Conformity (DoC) is on our Web site.
• You tried to enter a 3rd line by pressing . Insert 0.47" DECO MODE function. The LCD is set to an Please go to http://solutions.brother.com -> choose region
settings will also be cleared. • Refer to “Initial Settings”. To print all pictographs :
Line Limit! • You tried to print or preview two lines of text while incorrect language. (eg. Europe) -> choose country -> choose your model ->
0.13" (3.5mm) or 0.23" (6 mm) tape is installed. Install Wrong Tape! Use a tape cassette with the mark.
A blank horizontal line • There maybe some dust on the print choose “Manuals”-> choose Declaration of Conformity / [Print List] [Print OK?]
tape of a larger size. head. Remove the tape cassette and use
appears through the (*Select Language when required).
a dry cotton swab to gently wipe the print
You tried to print a label when there is no cassette printed label. head with an up-and-down motion.
No Cassette! installed.