Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Reactive Armor

state-of-the-art technology

BFVS Armor Tiles General Dynamics Armament and


• M3 -18 each Technical Products (GDATP), in
• M4 - 8 each conjunction with Rafael Ordnance
• M5 - 55 each Systems Division, has developed a
• M6 - 7 each next-generation Reactive Armor for
• M7 - 8 each application on the Bradley Fighting
96 Total Tiles
Per Vehicle Set
Vehicle System. This new concept
in Reactive Armor incorporates
state-of-the-art technology while
utilizing an insensitive high-energy
explosive.

Reactive Armor tiles produced by


Rafael and GDATP have been type
classified for production. During
extensive U.S. Government qualifi-
cation, over 1,500 armor tiles were
extensively tested. These tests
included:
• Shaped-charge armor protection
• Small-arms sensitivity
• Sequential environmental
• Transportation tests
• Artillery-fragment sensitivity
Specifications
• Sympathetic detonation
Reactive armor State-of-the art technology combining
an advanced reactive element with a new
• Collateral damage
passive element for armor protection • Tile mapping and junction tests
Superior performance The only solution that can defeat full-scale, • Special safety tests
shape-charge threats of modern, long-
range anti-tank missiles This new-generation Reactive
Safety Incident-free safety record in field opera- Armor offers a substantial increase
tions and combat in protection levels for troops and
Growth potential The weight savings of reactive armor equipment against all shoulder-fired
allows the capability to further increase
weapons, and most tube-launched,
protection without exceeding current
weight constraints shaped-charge systems.
Production capabilities GDATP has existing certified production
facilities
Logistics Logistics requirements are no greater
than those of ammunition

Four LakePointe Plaza, 2118 Water Ridge Parkway, Charlotte, NC 28217 www.gdatp.com
Crystal City Office Crystal Gateway Four, Suite 200, 200 12th Street S. Arlington, VA 22202
Tel 703 414 1800 Fax 703 414 1823 E-mail GDBusDev@gdatp.com
 Copyright 2004 General Dynamics Printed in U.S.A. (A054704)

You might also like