This document provides design details for a vertical stub to monorail beam connection according to BS EN 1993-1-8:2005. It specifies the material properties and performs checks for the bolts and welds. The bolts are checked for shear, bearing, tension, and combined shear and tension loading and found to be safe. The welds are also checked and found to have adequate capacity. Finally, the plate thickness is checked for bending and found to meet the minimum required thickness.
This document provides design details for a vertical stub to monorail beam connection according to BS EN 1993-1-8:2005. It specifies the material properties and performs checks for the bolts and welds. The bolts are checked for shear, bearing, tension, and combined shear and tension loading and found to be safe. The welds are also checked and found to have adequate capacity. Finally, the plate thickness is checked for bending and found to meet the minimum required thickness.
This document provides design details for a vertical stub to monorail beam connection according to BS EN 1993-1-8:2005. It specifies the material properties and performs checks for the bolts and welds. The bolts are checked for shear, bearing, tension, and combined shear and tension loading and found to be safe. The welds are also checked and found to have adequate capacity. Finally, the plate thickness is checked for bending and found to meet the minimum required thickness.
This document provides design details for a vertical stub to monorail beam connection according to BS EN 1993-1-8:2005. It specifies the material properties and performs checks for the bolts and welds. The bolts are checked for shear, bearing, tension, and combined shear and tension loading and found to be safe. The welds are also checked and found to have adequate capacity. Finally, the plate thickness is checked for bending and found to meet the minimum required thickness.
Yeid Strength = 355 N/mm² Ultimate Tensile Strength = 430 N/mm² Modulus of elasticity of steel , E = 210000 N/mm²
VERTICAL STUB TO MONORAIL BEAM CONNECTION
Max FX = 17.9 KN Refer Attahed staad out put Max FZ = 0 KN Max FY = 133.3 KN Max Mx = 29.3 KNm BOLT CHECK FOR SHEAR Design Criteria = Fv,Ed < Fv,Rd
Total Design Shear Force = 17.9 KN
Number Bolt provided = 8 Dia of Bolt = 20 mm Area of rod = 314.1593 mm² Design Shear per Bolt (Fv,Ed) = 2.24 KN Design shear resistance per bolt ( Fv,Rd) =
fub = 800 N/mm² Refer Table 3.1 BS EN 1993-1-8:2005
ƳM2 = 1.25 Refer Table 2.1 BS EN 1993-1-8:2005 Fv,Rd = (0.6 x 800 x 0.75 x A )/1.25 = 90.48 KN KN < (Fv,Ed) 2.24 KN < 90.48 KN ( Fv,Rd) HENCE BOLT SAFE SHEAR BOLT CHECK FOR BEARING Design Criteria = Fv,Ed < Fb,Rd Plate thickness (t) = 12 mm Design Bearing Resistance per bolt ( Fb,Rd) =
Design Tension Resistance per bolt ( Ft,Rd) 95.00 KN Design of Tensile force per rod ( Ft,Ed) Direct Tension = 133.3 KN Direct Tension Per rod = 133.3/8 = 16.66 KN Tension Due To moment Bolt Neutral Axis (d/7) = 58.33 mm top bolt c-l Ft = M x (dmax) / d^2 bolt in tension First row of bolt Tension (Ft1 ) Ft = 29.3 x 10^6 x222.5 /(( 222.5^2 +122.5^2+22.5^2)x2) 222.5 first row bolt Ft1 = 50.136 KN
Total Tension per rod = 66.80 KN
( Ft,Ed) = 66.80 KN 77.5 bolt in compresion Second row of bolt Tension (Ft2 ) Ft = 25.3 x 10^6 x122.5 /(( 222.5^2 +122.5^2+22.5^2)x2) first row bolt Ft12 = 23.88 KN Total Tension per rod = 40.54 Third row of bolt Tension (Ft3 ) Ft = 25.3 x 10^6 x22.5 /(( 222.5^2 +122.5^2+22.5^2)x2) first row bolt Ft1 = 2.5 KN Total Tension per rod = 19.16 KN ( Ft,Ed) = 66.80 KN
Design Criteria = Fw,Ed < Fw,Rd Design weld resistance per unit length (Fw,Rd) = fvw.d x a fvw.d = 220 0 Refer clause 4.5.3.3 BS EN 1993-1-8:2005 a = 6 mm Fw,Rd = 1320 N/mm Length of the weld = 250 mm Total weld resistance (Fw,Rd) = 330 KN > 253.01 KN HENCE OK
PLATE CHECK FOR BENDING
N,Ed = 271 KN (Total Tension for two Bolt)
Maximum length of plate between column web to Bolt line( c ) = 20 Maximum Moment (Mpl,1,Rd,u) = 271x0.025 = 5.42 KNm Thickness of Plate provided 16+16 = 32 mm = Thickness of Plate required = 1.1x8.13 0.25x0.1x3555x1000 = 25.92 mm Provided Plate Thickness = 32 mm Hence Safe