Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 4

Alarm Name affect SSV

Sensor Failure NO
AC Surge Protector Fault NO
Battery Current Out of Range NO
Battery Not In Position NO
Battery Power Unavailable NO
BBU DC Output Out of Range NO
Board Not In Position NO
Burglar Alarm NO
Cell Blocked NO
Fan Stalled NO
Mains Input Out of Range NO
Monitoring Device Maintenance Link Failure NO
Power Module and Monitoring Module Communication Failure NO
Power Supply DC Output Out of Range NO
BBU Board Maintenance Link Failure NO
BBU CPRI Interface Error YES
BBU CPRI Optical Module Fault YES
BBU CPRI Optical Module or Electrical Port Not Ready YES
BBU Optical Module Transmit/Receive Fault YES
Board Hardware Fault YES
Board Software Synchronization Failure YES
Cell Capability Degraded YES
Cell Unavailable YES
External Clock Reference Not Configured YES
External Clock Reference Problem YES
GPS Antenna Fault NO
GPS Locked Satellites Insufficient NO
No License Running in System YES
Remote Maintenance Link Running Data and Configuration Mismatch YES
RF Unit Maintenance Link Failure YES
RF Unit TX Channel Gain Out of Range YES
RF Unit VSWR Threshold Crossed YES
S1 Interface Fault--29201 YES
SCTP Link Fault NO
System Clock Failure YES
Time Synchronization Failure YES
Transmission Optical Interface Error YES
FAN Failure NO
Sensor temperatur ruang battery NO
PLN Power Failure NO
Door Open NO
Arester DCPDB Failure NO
RF Unit CPRI Interface Error YES
Inter-System RF Unit Parameter Settings Conflict YES
Inter-System Board Object Configuration Conflict YES
Inter-System Monitoring Device Parameter Settings Conflict NO
Inter-System Control Rights Conflict YES
Inter-System Cabinet Configuration Conflict NO
Remote Maintenance Link Failure YES
Ethernet Link Fault YES
Transmission Optical Module Not In Position YES
RF Unit Optical Module Transmit/Receive Fault YES
Board Software Program Error YES
X2 Interface Fault NO
X2 Interface Configuration Update Failed NO
RF Unit Clock Problem YES
RF Unit External Power Supply Insufficient YES
IP Address Conflict YES
eNodeB Control Plane Transmission Interruption YES
User Plane Path Fault NO
RF Unit Optical Module Type Mismatch YES
Data Configuration Exceeding Licensed Limit NO
Local User Consecutive Login Retries Failed NO
Configuration File Damaged YES
Base Station Frame Number Synchronization Error YES
Automatic Version Rollback YES
Inter-System Communication Failure YES
RF Unit RX Channel RTWP/RSSI Too Low YES
RF Unit Hardware Fault NO
RF Unit AC Input Power Failure YES
MAC Excessive Frame Error Rate YES
RF Unit Optical Module Fault YES
Cell PCI Conflict NO
Configuration Data Inconsistency YES
RRU Network Topology Type and Configuration Mismatch YES
Board Software Auto-Supply Failure YES
License on Trial NO
Board Temperature Unacceptable YES
Door Open ZTE NO
Battery Temperature Unacceptable NO
Transmission Optical Module Fault YES
Cell Unavailable--29240 YES
RF Unit TX Channel Switched Off Through Command YES
Power Module Abnormal YES
RF Unit Optical Module or Electrical Port Not Ready YES
RF Unit Hardware Fault--26532 YES
IP Clock Link Failure YES
Board Type and Configuration Mismatch YES
Cabinet Air Outlet Temperature Unacceptable NO
BBU CPRI Optical Interface Performance Degraded YES
Board Powered Off NO
Cell Reconfiguration Failed NO
SCTP Link Congestion NO
Load Disconnect NO
Inter-Board Service Link Failure YES
RRU Cascading Levels and Configuration Mismatch NO
Power Failure other Huawei NO
- NO
GPS Maintenance Link Failure NO
GPS Clock Output Unavailable NO
Inter-Board CANBUS Communication Failure NO
No Traffic Volume in the Cell YES
No response from all the NTP servers YES
Account Locked NO
Board Not Securely Installed YES
Ethernet Port Broadcast Packets Exceeding Alarm YES
RF Unit RX Channel RTWP/RSSI Unbalanced YES
M3UA route is unavailable YES
M3UA destination entity is inaccessible YES
M3UA SCTP path Faulty NO
M3UA link fault YES
SCCP DPC paused NO
SCCP SSN paused NO
IP Path Fault NO
Unauthorized Program Exist NO
Optical Module Fault YES
Detecting the Standby Forwarding Path Failed NO
Module Fault YES
CPU overload YES
Service filter rule is not effective NO
ARP Probe Not Responded NO
One DNS Server No Response NO
S1ap Link Down NO
Licensed Feature Entering Keep-Alive Period YES
Board Clock Input Unavailable YES
Transmission Optical Interface Performance Degraded YES
RF Unit Optical Interface Performance Degraded YES
RF Unit Temperature Unacceptable NO
Active Workspace Version Unavailable YES
Board Blocked YES
Number of Subscribers Approaching the Threshold Specified by the License YES
License File Expiring Precaution YES
License Feature Expiring Precaution YES
License Checking Alarm YES
OSPF neighbor abnormal YES
Trunk interface down YES
ARP probe failure YES
Physical line down YES
BBU Fan Stalled NO
IP PM Activation Failure YES
Phase Failure NO
Hidrogen Faulty NO
Arrester Failure NO
GSM Local Cell Unusable YES
Configured Capacity Limit Exceeding Licensed Limit YES
S1 Interface Fault YES
License Data Loss YES
System Dynamic Traffic Exceeding Licensed Limit NO
Local Cell Unusable YES
OBL Failure NO
Genset Run NO
Fuel Empty NO
E1/T1 Loss of Signal YES
Load Disconnect NO
Carrier No Traffic YES
IP Path Excessive Packet Loss Rate YES
Ambient Temperature Unacceptable NO
Radio Link Failure YES
GSM Local Cell Capability Decline NO
Carrier Configuration Error YES
Board Uplink Service Processing Channel Abnormal YES
Water Alarm NO
Main Control Board in Wrong Slot NO
Base Station Service Overload NO
Board Overload NO
Cabinet Temperature Unacceptable NO
Arrester Fail NO
Inter-BBU Port Failure NO
Inter-BBU Optical Module Receive Failure NO
SCTP Link IP Address Unreachable NO
Smoke Alarm NO
Cabinet Humidity Unacceptable NO
Board Configuration Inconsistent with Resource Group Configuration NO
Local Cell Capability Decline NO

You might also like