Professional Documents
Culture Documents
Wind Plant Modeling and Interconnection Users Group Scope
Wind Plant Modeling and Interconnection Users Group Scope
Scope
Background: The rated capacity of wind generation in many U.S. control areas has grown to the
point where the influence on transmission system operations and performance can no longer
safely be judged as negligible. As with other transmission-connected elements, appropriate
models of wind plants are necessary for the range of engineering studies employed to assess
these impacts and ensure the reliable operation of the network.
Wind plants pose some major challenges for modeling in power system calculations and
simulations. Relative to conventional generation facilities, wind plants are comprised of large
numbers of small units, and the turbines themselves employ technologies for energy conversion
and control that are not well known to power system engineers. Some early models for
commercial wind turbines have been developed and are available, but there is very little
application experience and guidance upon which to draw, and the validation efforts for these
existing models have not been exhaustive.
This type of situation is not new to the industry, as the introduction of any new technology for
transmission system application imposes similar challenges for modeling. The power system
engineering community, especially through the efforts of technical committees within the IEEE
Power Engineering Society, has been able to keep pace with important technology advancements
in transmission system design and engineering. With wind generation, however, the situation is a
bit more critical given the industry growth rate, the short project lead times, and the rapid
evolution in wind turbine technology and wind plant design practices.
Scope and Activities: By leveraging established relationships with all of the stakeholders, the
UWIG Wind Plant Modeling and Interconnection User Group aims to meet the immediate and
critical needs of the wind generation and power industries. The activities will focus on assessing
the impact of wind generation on the transmission network, including wind turbine and wind
plant modeling, dynamic performance, and short circuit behavior; the influence of wind plant
design on interconnection performance, and best practices and standards for wind plant
interconnection.
Because the industry efforts in this area are really just beginning, the list of needs is substantial.
The Users Group will prioritize and develop recommendations for meeting these needs, in
accordance with the following outline:
1. Wind Turbine and Wind Plant Models for Transmission System Studies
In support of the activities outlined above, some additional description related to the activities of
the User Group follows:
Models
• Work to create, maintain, and evaluate information related to computer models for both
new and existing wind turbine technologies and other commercial products to be used in
power system studies
• Assist in efforts to validate new and existing computer models against available
laboratory data and field measurements
• Develop new information - new models, application expertise and guidance, validation -
when required and supported by User Group members or the UWIG
• Provide support to User Group members engaged in studies, evaluations, or performance
measurements of wind generation facilities on their systems
• Document experience with existing models and make recommendations for
enhancements or new developments that will better meet the needs of the engineering
community
• Assist participating vendors of wind turbines or other products for wind plant applications
with the specification and development of appropriate models for their technologies
• Provide a forum for User Group members to share experience and lessons learned from
their own use and application of wind turbine and wind plant models
• Evaluate new tools and techniques for studies of transmission networks with wind
generation facilities
• Offer support and assistance for a wide range of computer tools, including GE PSLF, PTI
PSS/E, EMTP and PSCAD, etc.
• Participate in industry activities to develop wind plant interconnection guidelines
• Participate in industry activities to develop a standard approach to performing
interconnection studies required under FERC Order 2003
Liaison
• Maintain liaison with IEEE Power Engineering Society, AWEA, IEC, IEA, WECC, and
other technical committees working in this area
• Provide support to other UWIG User Groups (e.g. Distributed Wind User Group for
turbine modeling) where appropriate
Communication and Education: User Group results will be provided over the web and through
meeting participation. The following communication means will be employed:
User Group Startup: The initial activities of the User Group will focus on assessing the
ongoing work and development in this area and prioritizing the various industry needs. We
would like to identify User Group members who would be able to contribute to one or more of
the following activities during the startup phase. We especially encourage the participation of
power system engineers who can contribute to the modeling and study work, and interconnection
requirements definition.
The User Group members will identify and prioritize specific needs and open technical questions
related to wind turbine and wind plant modeling in power system studies. The items of highest
priority will be evaluated in detail, and recommendations will be made as to how these might be
addressed by UWIG or other parties.
The User Group will seek to support and assist with opportunities for collecting laboratory or
field measurement data for the purpose of model validation.
Over the past two or three years, an increasing number of technical papers, articles, and
presentations have been appearing in the industry literature. While significant in number, they are
scattered over a variety of journals and technical conference proceedings. To keep the members
apprised of this growing body of work, the User Group will compile and begin maintaining an
annotated bibliography, with links to electronic documents where possible.
Finally, the User Group will work to establish liaison with outside organizations engaged in
related work, such as the IEEE, AWEA, IEC, IEA, and WECC. Relevant goals, objectives and
activities of these organizations will be tracked, and opportunities to constructively engage and
contribute to their work will be sought.
NREL Participation: The activities of the Wind Plant Modeling and Interconnection User
Group have good synergy with some ongoing initiatives and activities at NREL. The
dynamometer test facility, for example, has the potential to provide very detailed measurement
information for characterizing the electro-dynamic performance of individual wind turbines.
NREL is currently a participating member of the IEA Annex XXI that is focused on the very
topic of developing dynamic models for wind turbines and wind plants. Ed Muljadi's work in
characterizing the steady-state performance of wind plants through detailed modeling and
calculation can provide a solid basis for moving forward with questions related to both small-
and large-signal dynamic phenomena. The NREL program will contribute to specific activities of
the User Group.
New activities that will contribute to the users group objectives include a dynamic model
validation exercise for a utility company in the southwest U.S. In this effort, newly available
dynamic wind turbine models for PSS/E will be used to construct various representations of a
large wind plant. The effect of the amount of detail in the wind plant model on the dynamic
behavior as viewed at the point of interconnection to the transmission system will be explored.
The exposure of the plant to turbine trips for faults on the transmission network will also be
investigated.
| UWIG Home |