Professional Documents
Culture Documents
Qunatity - Nagaland
Qunatity - Nagaland
129A from Design Km 146.208 to Km 163.592 (Length – 17.384 Km) in the state of
Nagaland on EPC mode (Pkg – III) under NH(O) - TSP”
Abstract of Quantity for of Box Culvert
S.No. SOR Description Unit 1x5x5 1x3x4.0- 1x2x3.0- 1x2.x2.- 1x2.00-46 Quantity Rate Amount
2 No. 9no. 26 26
2 12.8 Plain/Reinforced Cement Concrete in Open Foundation complete as per cu.m 74 297 546 494 920 2331
Drawing and Technical Specifications. PCC Grade M15
3 B (ii) PCC Grade M20 (for curtain wall) 108.62 358.57 773.41 577.43 1021.61 2840
4 12.8 Plain/Reinforced Cement Concrete in Open Foundation complete as per cu.m 800 2214 4264 2496 4416 14190
Drawing and Technical Specifications.(G. RCC Grade M30)
5 12.40 Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in t 80 225 442 260 460 1467
Foundation complete as per Drawing and Technical Specifications.
6 14.4 Providing and laying Cement concrete wearing coat M-30 grade cum 22 81 234 208 368 913
including reinforcement complete as per drawing and Technical
Specifications as per relevant clause of section 2700.
7 14.10 PCC M15 Grade leveling course below approach slab complete as per cum 26 117 337 337 596 1413
drawing and Technical specification and as per relevant section 2700
8 14.11 Providing and laying M-30 grade Reinforced cement concrete approach Cum 52 234 676 676 1196 2834
slab including reinforcement and formwork complete as per drawing and
Technical specification and as per relevant sections 1500, 1600, 1700
and 2704
9 8.22 Reinforced Cement Concrete Crash Barrier (Provision of an Reinforced Rmt 54 198 520 520 920 2212
cement concrete crash barrier at the edges of the road, approaches to
bridge structures and medians, constructed with M-20 grade concrete
with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm
dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler
board, keyed to the structure on which it is built and installed as per
design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-
DO III dated 24 June 1994 as per dimensions in the approved drawing
and at locations directed by the Engineer, all as specified)
1 of 18
Construction of 2 Laning with Hard Shoulder of Peren – Dimapur section on NH –
129A from Design Km 146.208 to Km 163.592 (Length – 17.384 Km) in the state of
Nagaland on EPC mode (Pkg – III) under NH(O) - TSP”
Abstract of Quantity for of Box Culvert
S.No. SOR Description Unit 1x5x5 1x3x4.0- 1x2x3.0- 1x2.x2.- 1x2.00-46 Quantity Rate Amount
2 No. 9no. 26 26
14 13.10 Providing and laying of Filter media with granular materials/stone Cum 398 1296 1092 1560 2760 7106
crushed aggregates satisfying the requirements laid down in clause
2504.2.2. of MORT&H specifications to a thickness of not less than 600
mm with smaller size towards the soil and bigger size towards the wall
and provided over the entire surface behind abutment, wing wall and
return wall to the full height compacted to a firm condition complete as
per drawing and technical specifications 710.1.4 of I.R.C. 78 and 2200.
Back filling behind abutment, wing wall and return wall complete as per
15 13.9 drawing and Technical specification 710.1.4 of I.R.C. 78 and 2200.(i) Cum 2334 6255 5850 4004 7084 25527
Granular material
Providing and laying boulders apron on river bed for protection against
scour with stone boulders weighing not less than 40 kg each complete
15.1 cum 138 389 645 278 1262 2713
as per drawing and Technical specification as per relevant clauses of
section 2503
2 of 18
Construction of 2 Laning with Hard Shoulder of Peren – Dimapur section on NH –
129A from Design Km 146.208 to Km 163.592 (Length – 17.384 Km) in the state of
Nagaland on EPC mode (Pkg – III) under NH(O) - TSP”
Abstract of Quantity for of Box Culvert
S.No. SOR Description Unit 1x5x5 1x3x4.0- 1x2x3.0- 1x2.x2.- 1x2.00-46 Quantity Rate Amount
2 No. 9no. 26 26
3 of 18
DETAILS OF MEASUREMENTS OF BOX STRUCTURE SIZE: 1 x 5 x 5
Item
Description Unit Length Width Height No. Quantity
Foundation
Excavation for Structures Earth work in excavation of
foundation of structures as per drawing and technical
specification, including setting out, construction of
1.00 2.1 I (i) shoring and bracing, removal of stumps and other cu.m 798
deleterious matter, dressing of sides and bottom and
backfilling with approved material including dewatering
etc. complete.
Ordinary soil (Upto 3m depth) 7.14 13.00 1.02 1 95
Parapet wall
Retaining wall 8.750 6.600 2.1 4 485
Curtain wall 218
798
parapet shaft
Return wall foundation 8.250 5.600 0.400 4 73.92
8.250 4.800 0.500 4 39.60
8.250 0.800 0.500 4 13.20
return wall shaft 8.250 0.550 6.600 4 119.79
399.73
Supplying, fitting and placing HSD (High Strength
Deformed Steel) bar reinforcement in foundation
4.00 2.24 mt 40
complete as per drawing and technical specifications as
per section 1600.
top slab @ 100 kg/m^3 36.84 0.1 3.68
Wall @ 100 kg/m^3 68.40 0.1 6.84
bottom slab @ 100 kg/m^3 42.00 0.1 4.20
Parapet wall @ 100kg/m^3 0.00 0.1 0.00
Haunch , shear Key, Bracket @ 100 kg/m^3 5.98 0.1 0.60
Return wall @ 100 kg/m^3 246.51 0.1 24.65
39.97
Providing and laying Cement concrete wearing coat M-
30 grade including reinforcement complete as per
5.00 4.40 cum 11
drawing and Technical Specifications as per relevant
clause of section 2700.
4 of 18
Description Unit Length Width Height No. Quantity
13.14 11.00 0.075 1 11
PCC M15 Grade leveling course below approach
6.00 4.1 slab complete as per drawing and Technical cum 13
specification and as per relevant section 2700
3.60 12.00 0.15 2 13
Providing and laying M-30 grade Reinforced cement
concrete approach slab including reinforcement and
7.00 4.11 formwork complete as per drawing and Technical Cum 26
specification and as per relevant sections 1500, 1600,
1700 and 2704
3.5 12.00 0.3 2 25.2
Reinforced Cement Concrete Crash Barrier (Provision
of an Reinforced cement concrete crash barrier at the
edges of the road,approaches to bridge structures and
medians, constructed with M-25grade concrete with
HYSD reinforcement conforming to IRC:212000 and
dowel bars 25 mm dia, 450 mm long at expansion joints
8.00 8.29 filled with pre-moulded asphalt filler board, keyed to the Rmt 27
structure on which it is built and installed as per design
given in the enclosure to MOST circular No. RW/NH-
33022/1/94-DO III dated 24 June, 1994as per
dimensions in the approved drawing and at locations
directed
by the Engineer, all as specified)
13.14 2 26.28
Providing painting figuring and numbering to culverts
10.00 8.16 upto 6 m span complete as per IRC specifications. Nos 2
2 2
Painting on concrete surface of R.C.C. Railing
(Providing and applying 2 coats of water based cement
11.00 4.21 paint to unplastered concrete surface after cleaning the Sqm 53
surface of dirt, dust, oil, grease, efflorescence and
applying paint @ of 1 litre for 2 Sq.m. )
13.1 2 2 52.56
Providing and laying Pitching on slopes laid over
prepared filter media including boulder apron laid dry in
12.00 5.4 front of toe of embankment complete as per drawing Cum 41
and Technical specifications as per section 2504. A
Stone/Boulder
u/s Flexible appron (add in item no. 5.4) 6.14 3 0.75 1 13.815
d/s Flexible appron (add in item no. 5.4) 6.14 6 0.75 1 27.63
Slope pitching 5.20 7.80 0.3 68.9
5 of 18
Description Unit Length Width Height No. Quantity
Cone on slope 5.20 7.80 331.3
1166.8
Providing weep holes in Brick masonry/ Plain/
Reinforced concrete abutment, wing wall/return
wall with 100 mm dia. AC pipe, extending through the
15.00 3.8 Rmt 88
full width of the structure with slope of 1 V: 20 H
towards drawing face. Complete as per drawing and
Technical specifications section 2706 and 2200.
side wall 12.00 5.00 0 0
Return wall 0.55 8.00 5.00 160 88
88
Type 2
Excavation Cum 17.14 2.3 2.3 1 90.671
PCC M15 Cum 16.34 1.5 0.15 1 3.677
PCC M-20 Cum 16.14 1.4675 1 23.685
M-15 Rigid Apron Cum 7.50 16.14 0.15 1 18.158
17.00 M-15 Rigid Apron Cum 7.50 16.14 0.15 1 18.158
U/S Rigid apron Cum 7.50 16.14 0.3 1 36.315
D/S Rigid apron Cum 7.50 16.14 0.3 1 36.315
114.075
6 of 18
DETAILS OF MEASUREMENTS OF BOX STRUCTURE SIZE: 1 x 2 x 2
Dimensions
Item Description Unit Length Width Height No. Quantity
Foundation
Excavation for Structures Earth work in excavation of
foundation of structures as per drawing and technical
specification, including setting out, construction of
1.00 2.1 I (i) shoring and bracing, removal of stumps and other cu.m 319
deleterious matter, dressing of sides and bottom and
backfilling with approved material including dewatering
etc. complete.
Ordinary soil (Upto 3m depth) 3.60 13.00 0.83 1 39
Parapet wall
Retaining wall 4.025 5.400 2.1 4 183
Curtain wall 97
318
parapet shaft
Return wall foundation 3.525 4.400 0.400 4 24.82
3.525 3.900 0.200 4 5.50
3.525 0.500 0.200 4 1.41
return wall shaft 3.525 0.400 3.750 4 21.15
95.07
Supplying, fitting and placing HSD (High Strength
Deformed Steel) bar reinforcement in foundation
4.00 2.24 mt 10
complete as per drawing and technical specifications as
per section 1600.
top slab @ 100 kg/m^3 10.92 0.1 1.09
Wall @ 100 kg/m^3 14.40 0.1 1.44
bottom slab @ 100 kg/m^3 11.86 0.1 1.19
Parapet wall @ 100kg/m^3 0.00 0.1 0.00
Haunch , shear Key, Bracket @ 100 kg/m^3 5.02 0.1 0.50
Return wall @ 100 kg/m^3 52.88 0.1 5.29
9.51
Providing and laying Cement concrete wearing coat M-
30 grade including reinforcement complete as per
5.00 4.40 cum 8
drawing and Technical Specifications as per relevant
clause of section 2700.
7 of 18
Item Description Unit Length Width Height No. Quantity
9.60 11.00 0.075 1 8
PCC M15 Grade leveling course below approach
6.00 4.1 slab complete as per drawing and Technical cum 13
specification and as per relevant section 2700
3.60 12.00 0.15 2 13
Providing and laying M-30 grade Reinforced cement
concrete approach slab including reinforcement and
7.00 4.11 formwork complete as per drawing and Technical Cum 26
specification and as per relevant sections 1500, 1600,
1700 and 2704
3.5 12.00 0.3 2 25.2
Reinforced Cement Concrete Crash Barrier (Provision
of an Reinforced cement concrete crash barrier at the
edges of the road,approaches to bridge structures and
medians, constructed with M-25grade concrete with
HYSD reinforcement conforming to IRC:212000 and
dowel bars 25 mm dia, 450 mm long at expansion joints
8.00 8.29 filled with pre-moulded asphalt filler board, keyed to the Rmt 20
structure on which it is built and installed as per design
given in the enclosure to MOST circular No. RW/NH-
33022/1/94-DO III dated 24 June, 1994as per
dimensions in the approved drawing and at locations
directed
by the Engineer, all as specified)
9.60 2 19.2
Providing painting figuring and numbering to culverts
10.00 8.16 upto 6 m span complete as per IRC specifications. Nos 2
2 2
Painting on concrete surface of R.C.C. Railing
(Providing and applying 2 coats of water based cement
11.00 4.21 paint to unplastered concrete surface after cleaning the Sqm 39
surface of dirt, dust, oil, grease, efflorescence and
applying paint @ of 1 litre for 2 Sq.m. )
9.6 2 2 38.40
Providing and laying Pitching on slopes laid over
prepared filter media including boulder apron laid dry in
12.00 5.4 front of toe of embankment complete as per drawing Cum 18
and Technical specifications as per section 2504. A
Stone/Boulder
u/s Flexible appron (add in item no. 5.4) 2.60 3 0.75 1 5.85
d/s Flexible appron (add in item no. 5.4) 2.60 6 0.75 1 11.7
17.55
Slope pitching 2.05 3.08 0.3 10.7
8 of 18
Item Description Unit Length Width Height No. Quantity
Back filling behind abutment, wing wall and return
14.00 3.9 wall complete as per drawing and Technical Cum 154
specification 710.1.4 of I.R.C. 78 and 2200.
(i) Granular material 3.08 10.60 2.05 2 133.6
Cone on slope 2.05 3.08 20.3
153.9
Providing weep holes in Brick masonry/ Plain/
Reinforced concrete abutment, wing wall/return
wall with 100 mm dia. AC pipe, extending through the
15.00 3.8 Rmt 10
full width of the structure with slope of 1 V: 20 H
towards drawing face. Complete as per drawing and
Technical specifications section 2706 and 2200.
side wall 12.00 2.00 0 0
Return wall 0.4 3.00 2.00 24 9.6
9.6
Type 2
Excavation Cum 7.6 2.3 2.3 1 40.204
PCC M15 Cum 6.8 1.5 0.15 1 1.530
PCC M-20 Cum 6.6 1.4675 1 9.686
M-15 Rigid Apron Cum 3.00 6.6 0.15 1 2.970
17.00 M-15 Rigid Apron Cum 3.00 6.6 0.15 1 2.970
U/S Rigid apron Cum 3.00 6.6 0.3 1 5.940
D/S Rigid apron Cum 3.00 6.6 0.3 1 5.940
29.430
9 of 18
DETAILS OF MEASUREMENTS OF BOX STRUCTURE SIZE: 1 x 3 x 4
Foundation
Excavation for Structures Earth work in excavation of
foundation of structures as per drawing and technical
specification, including setting out, construction of
1.00 2.1 I (i) shoring and bracing, removal of stumps and other cu.m 590
deleterious matter, dressing of sides and bottom and
backfilling with approved material including dewatering
etc. complete.
Ordinary soil (Upto 3m depth) 4.84 13.00 0.87 1 55
Parapet wall
Retaining wall 7.130 6.200 2.1 4 371
Curtain wall 163
589
parapet shaft
Return wall foundation 6.630 5.200 0.400 4 55.16
6.630 4.500 0.400 4 23.87
6.630 0.700 0.400 4 7.43
return wall shaft 6.630 0.500 5.620 4 74.52
245.36
Supplying, fitting and placing HSD (High Strength
Deformed Steel) bar reinforcement in foundation
4.00 2.24 mt 25
complete as per drawing and technical specifications as
per section 1600.
top slab @ 100 kg/m^3 19.35 0.1 1.94
Wall @ 100 kg/m^3 40.32 0.1 4.03
bottom slab @ 100 kg/m^3 19.35 0.1 1.94
Parapet wall @ 100kg/m^3 0.00 0.1 0.00
Haunch , shear Key, Bracket @ 100 kg/m^3 5.36 0.1 0.54
Return wall @ 100 kg/m^3 160.98 0.1 16.10
24.54
Providing and laying Cement concrete wearing coat M-
30 grade including reinforcement complete as per
5.00 4.40 cum 9
drawing and Technical Specifications as per relevant
clause of section 2700.
10 of 18
Item Description Unit Length Width Height No. Quantity
10.84 11.00 0.075 1 9
PCC M15 Grade leveling course below approach
6.00 4.1 slab complete as per drawing and Technical cum 13
specification and as per relevant section 2700
3.60 12.00 0.15 2 13
Providing and laying M-30 grade Reinforced cement
concrete approach slab including reinforcement and
7.00 4.11 formwork complete as per drawing and Technical Cum 26
specification and as per relevant sections 1500, 1600,
1700 and 2704
3.5 12.00 0.3 2 25.2
Reinforced Cement Concrete Crash Barrier (Provision
of an Reinforced cement concrete crash barrier at the
edges of the road,approaches to bridge structures and
medians, constructed with M-25grade concrete with
HYSD reinforcement conforming to IRC:212000 and
dowel bars 25 mm dia, 450 mm long at expansion joints
8.00 8.29 filled with pre-moulded asphalt filler board, keyed to the Rmt 22
structure on which it is built and installed as per design
given in the enclosure to MOST circular No. RW/NH-
33022/1/94-DO III dated 24 June, 1994as per
dimensions in the approved drawing and at locations
directed
by the Engineer, all as specified)
10.84 2 21.68
Providing painting figuring and numbering to culverts
10.00 8.16 upto 6 m span complete as per IRC specifications. Nos 2
2 2
Painting on concrete surface of R.C.C. Railing
(Providing and applying 2 coats of water based cement
11.00 4.21 paint to unplastered concrete surface after cleaning the Sqm 44
surface of dirt, dust, oil, grease, efflorescence and
applying paint @ of 1 litre for 2 Sq.m. )
10.8 2 2 43.36
Providing and laying Pitching on slopes laid over
prepared filter media including boulder apron laid dry in
12.00 5.4 front of toe of embankment complete as per drawing Cum 26
and Technical specifications as per section 2504. A
Stone/Boulder
u/s Flexible appron (add in item no. 5.4) 3.84 3 0.75 1 8.64
d/s Flexible appron (add in item no. 5.4) 3.84 6 0.75 1 17.28
25.92
Slope pitching 4.12 6.18 0.3 43.3
11 of 18
Item Description Unit Length Width Height No. Quantity
Back filling behind abutment, wing wall and return
14.00 3.9 wall complete as per drawing and Technical Cum 695
specification 710.1.4 of I.R.C. 78 and 2200.
(i) Granular material 6.18 10.40 4.12 2 529.6
Cone on slope 4.12 6.18 164.8
694.4
Providing weep holes in Brick masonry/ Plain/
Reinforced concrete abutment, wing wall/return
wall with 100 mm dia. AC pipe, extending through the
15.00 3.8 Rmt 48
full width of the structure with slope of 1 V: 20 H
towards drawing face. Complete as per drawing and
Technical specifications section 2706 and 2200.
side wall 12.00 4.00 0 0
Return wall 0.5 6.00 4.00 96 48
48
Type 2
Excavation Cum 12.84 2.3 2.3 1 67.924
PCC M15 Cum 12.04 1.5 0.15 1 2.709
PCC M-20 Cum 11.84 1.4675 1 17.375
M-15 Rigid Apron Cum 6.00 11.84 0.15 1 10.656
17.00 M-15 Rigid Apron Cum 6.00 11.84 0.15 1 10.656
U/S Rigid apron Cum 6.00 11.84 0.3 1 21.312
D/S Rigid apron Cum 6.00 11.84 0.3 1 21.312
68.544
12 of 18
DETAILS OF MEASUREMENTS OF BOX STRUCTURE SIZE: 1 x 2 x 3
Foundation
Excavation for Structures Earth work in excavation of
foundation of structures as per drawing and technical
specification, including setting out, construction of
1.00 2.1 I (i) shoring and bracing, removal of stumps and other cu.m 443
deleterious matter, dressing of sides and bottom and
backfilling with approved material including dewatering
etc. complete.
Ordinary soil (Upto 3m depth) 3.84 13.00 0.87 1 43
Parapet wall
Retaining wall 5.630 5.800 2.1 4 274
Curtain wall 125
443
parapet shaft
Return wall foundation 5.130 4.800 0.400 4 39.40
5.130 4.200 0.300 4 12.93
5.130 0.600 0.300 4 3.69
return wall shaft 5.130 0.450 4.720 4 43.58
163.56
Supplying, fitting and placing HSD (High Strength
Deformed Steel) bar reinforcement in foundation
4.00 2.24 mt 17
complete as per drawing and technical specifications as
per section 1600.
top slab @ 100 kg/m^3 14.31 0.1 1.43
Wall @ 100 kg/m^3 30.24 0.1 3.02
bottom slab @ 100 kg/m^3 14.31 0.1 1.43
Parapet wall @ 100kg/m^3 0.00 0.1 0.00
Haunch , shear Key, Bracket @ 100 kg/m^3 5.09 0.1 0.51
Return wall @ 100 kg/m^3 99.60 0.1 9.96
16.36
Providing and laying Cement concrete wearing coat M-
30 grade including reinforcement complete as per
5.00 4.40 cum 9
drawing and Technical Specifications as per relevant
clause of section 2700.
13 of 18
Item Description Unit Length Width Height No. Quantity
9.84 11.00 0.075 1 8
PCC M15 Grade leveling course below approach
6.00 4.1 slab complete as per drawing and Technical cum 13
specification and as per relevant section 2700
3.60 12.00 0.15 2 13
Providing and laying M-30 grade Reinforced cement
concrete approach slab including reinforcement and
7.00 4.11 formwork complete as per drawing and Technical Cum 26
specification and as per relevant sections 1500, 1600,
1700 and 2704
3.5 12.00 0.3 2 25.2
Reinforced Cement Concrete Crash Barrier (Provision
of an Reinforced cement concrete crash barrier at the
edges of the road,approaches to bridge structures and
medians, constructed with M-25grade concrete with
HYSD reinforcement conforming to IRC:212000 and
dowel bars 25 mm dia, 450 mm long at expansion joints
8.00 8.29 filled with pre-moulded asphalt filler board, keyed to the Rmt 20
structure on which it is built and installed as per design
given in the enclosure to MOST circular No. RW/NH-
33022/1/94-DO III dated 24 June, 1994as per
dimensions in the approved drawing and at locations
directed
by the Engineer, all as specified)
9.84 2 19.68
Providing painting figuring and numbering to culverts
10.00 8.16 upto 6 m span complete as per IRC specifications. Nos 2
2 2
Painting on concrete surface of R.C.C. Railing
(Providing and applying 2 coats of water based cement
11.00 4.21 paint to unplastered concrete surface after cleaning the Sqm 40
surface of dirt, dust, oil, grease, efflorescence and
applying paint @ of 1 litre for 2 Sq.m. )
9.8 2 2 39.36
Providing and laying Pitching on slopes laid over
prepared filter media including boulder apron laid dry in
12.00 5.4 front of toe of embankment complete as per drawing Cum 20
and Technical specifications as per section 2504. A
Stone/Boulder
u/s Flexible appron (add in item no. 5.4) 2.84 3 0.75 1 6.39
d/s Flexible appron (add in item no. 5.4) 2.84 6 0.75 1 12.78
19.17
Slope pitching 3.12 4.68 0.3 24.8
14 of 18
Item Description Unit Length Width Height No. Quantity
Back filling behind abutment, wing wall and return
14.00 3.9 wall complete as per drawing and Technical Cum 225
specification 710.1.4 of I.R.C. 78 and 2200.
(i) Granular material 4.68 10.50 3.12 2 153.3
Cone on slope 3.12 4.68 71.6
224.9
Providing weep holes in Brick masonry/ Plain/
Reinforced concrete abutment, wing wall/return
wall with 100 mm dia. AC pipe, extending through the
15.00 3.8 Rmt 27
full width of the structure with slope of 1 V: 20 H
towards drawing face. Complete as per drawing and
Technical specifications section 2706 and 2200.
side wall 12.00 3.00 0 0
Return wall 0.45 5.00 3.00 60 27
27
Type 2
Excavation Cum 9.84 2.3 2.3 1 52.054
PCC M15 Cum 9.04 1.5 0.15 1 2.034
PCC M-20 Cum 8.84 1.4675 1 12.973
M-15 Rigid Apron Cum 4.50 8.84 0.15 1 5.967
17.00 M-15 Rigid Apron Cum 4.50 8.84 0.15 1 5.967
U/S Rigid apron Cum 4.50 8.84 0.3 1 11.934
D/S Rigid apron Cum 4.50 8.84 0.3 1 11.934
43.038
15 of 18
DETAILS OF MEASUREMENTS OF BOX STRUCTURE SIZE: 1 x 2 x 2
Dimensions
Item Description Unit Length Width Height No. Quantity
Foundation
Excavation for Structures Earth work in excavation of
foundation of structures as per drawing and technical
specification, including setting out, construction of
1.00 2.1 I (i) shoring and bracing, removal of stumps and other cu.m 303
deleterious matter, dressing of sides and bottom and
backfilling with approved material including dewatering
etc. complete.
Ordinary soil (Upto 3m depth) 3.60 13.00 0.83 1 39
Parapet wall
Retaining wall 3.687 5.400 2.1 4 167
Curtain wall 97
303
parapet shaft
Return wall foundation 3.525 4.400 0.400 4 24.82
3.525 3.900 0.200 4 5.50
3.525 0.500 0.200 4 1.41
return wall shaft 3.525 0.400 3.750 4 21.15
95.07
Supplying, fitting and placing HSD (High Strength
Deformed Steel) bar reinforcement in foundation
4.00 2.24 mt 10
complete as per drawing and technical specifications as
per section 1600.
top slab @ 100 kg/m^3 10.92 0.1 1.09
Wall @ 100 kg/m^3 14.40 0.1 1.44
bottom slab @ 100 kg/m^3 11.86 0.1 1.19
Parapet wall @ 100kg/m^3 0.00 0.1 0.00
Haunch , shear Key, Bracket @ 100 kg/m^3 5.02 0.1 0.50
Return wall @ 100 kg/m^3 52.88 0.1 5.29
9.51
Providing and laying Cement concrete wearing coat M-
30 grade including reinforcement complete as per
5.00 4.40 cum 8
drawing and Technical Specifications as per relevant
clause of section 2700.
16 of 18
Item Description Unit Length Width Height No. Quantity
9.60 11.00 0.075 1 8
PCC M15 Grade leveling course below approach
6.00 4.1 slab complete as per drawing and Technical cum 13
specification and as per relevant section 2700
3.60 12.00 0.15 2 13
Providing and laying M-30 grade Reinforced cement
concrete approach slab including reinforcement and
7.00 4.11 formwork complete as per drawing and Technical Cum 26
specification and as per relevant sections 1500, 1600,
1700 and 2704
3.5 12.00 0.3 2 25.2
Reinforced Cement Concrete Crash Barrier (Provision
of an Reinforced cement concrete crash barrier at the
edges of the road,approaches to bridge structures and
medians, constructed with M-25grade concrete with
HYSD reinforcement conforming to IRC:212000 and
dowel bars 25 mm dia, 450 mm long at expansion joints
8.00 8.29 filled with pre-moulded asphalt filler board, keyed to the Rmt 20
structure on which it is built and installed as per design
given in the enclosure to MOST circular No. RW/NH-
33022/1/94-DO III dated 24 June, 1994as per
dimensions in the approved drawing and at locations
directed
by the Engineer, all as specified)
9.60 2 19.2
Providing painting figuring and numbering to culverts
10.00 8.16 upto 6 m span complete as per IRC specifications. Nos 2
2 2
Painting on concrete surface of R.C.C. Railing
(Providing and applying 2 coats of water based cement
11.00 4.21 paint to unplastered concrete surface after cleaning the Sqm 39
surface of dirt, dust, oil, grease, efflorescence and
applying paint @ of 1 litre for 2 Sq.m. )
9.6 2 2 38.40
Providing and laying Pitching on slopes laid over
prepared filter media including boulder apron laid dry in
12.00 5.4 front of toe of embankment complete as per drawing Cum 18
and Technical specifications as per section 2504. A
Stone/Boulder
u/s Flexible appron (add in item no. 5.4) 2.60 3 0.75 1 5.85
d/s Flexible appron (add in item no. 5.4) 2.60 6 0.75 1 11.7
17.55
Slope pitching 3.69 2.00 0.3 1 27.43
17 of 18
Item Description Unit Length Width Height No. Quantity
Back filling behind abutment, wing wall and return
14.00 3.9 wall complete as per drawing and Technical Cum 154
specification 710.1.4 of I.R.C. 78 and 2200.
(i) Granular material 3.08 10.60 2.05 2 133.6
Cone on slope 2.05 3.08 20.3
153.9
Providing weep holes in Brick masonry/ Plain/
Reinforced concrete abutment, wing wall/return
wall with 100 mm dia. AC pipe, extending through the
15.00 3.8 Rmt 10
full width of the structure with slope of 1 V: 20 H
towards drawing face. Complete as per drawing and
Technical specifications section 2706 and 2200.
side wall 12.00 2.00 0 0
Return wall 0.4 3.00 2.00 24 9.6
9.6
Type 2
Excavation Cum 7.6 2.3 2.3 1 40.204
PCC M15 Cum 6.8 1.5 0.15 1 1.530
PCC M-20 Cum 6.6 1.4675 1 9.686
M-15 Rigid Apron Cum 3.00 6.6 0.15 1 2.970
17.00 M-15 Rigid Apron Cum 3.00 6.6 0.15 1 2.970
U/S Rigid apron Cum 3.00 6.6 0.3 1 5.940
D/S Rigid apron Cum 3.00 6.6 0.3 1 5.940
29.430
18 of 18