Professional Documents
Culture Documents
Sprax Sarco Cseries Valve Option
Sprax Sarco Cseries Valve Option
Sprax Sarco Cseries Valve Option
CH Issue 3
'C' Series
Valve Options
Description Typical valve flow characteristics
The Spirax Sarco 'C' series valve range has a number of available 100
options. The options relate to valve stem sealing, trim materials, valve
flow characteristics and Cv capacity values. They are described in
(and may be selected from) this TI.
Flow %
The standard characteristic for the 'C' series valve is equal
percentage (E), however the following options are available: 50
Equal percentage E Equal percentage
Linear L
Fast opening F
Modified equal percentage M
Note: Modified special characteristic trims are designed upon 0
request. 0 50 100
Valve opening %
Valve stem sealing 'C' series valve selection guide
PTFE chevron (P)
1", 1½", 2", 2½", 3", 4", 5", 6" & 8" 2"
Design temperature 14°F to 482°F (-10°C to +250°C) Valve
size DN25, 40, 50, 65, 80, 100, 125, 150 & 200
Material PTFE chevron
Valve series C = Cage trim C
Graphite (H)
E = Equal percentage
14°F to 572°F (-10°C to +300°C) standard bonnet Valve L = Linear
Design temperature E
14°F to 1004°F(-10°C to +540°C) extended bonnet characteristic F = Fast opening
M = Modified equal percentage
Bellows (B) 4 = Carbon steel
Body
material 6 = Stainless steel 4
Design temperature 14°F to 752°F (-10°C to +400°C) 8 = Alloy steel
Material Carbon steel housing ASTM 216 WCB 2 = Butt weld (2" to 8")
Connections 3 = Flanged 3
Pressure rating ASME (ANSI) 150
4 = Socket weld (1", 1½" and 2")
Plug and seat treatment Stem
P = PTFE chevron
sealing H = Graphite
Hardened (T) options P
B = Bellows
Design temperature 14°F to 797°F (-10°C to +425°C)
Seating T = AISI 431 hardened
Material Stainless steel AISI 431
options G = PTFE soft seat T
Leakage ASME (ANSI) Class IV W = Hard faced stellite AISI 316
C = Standard cage
PTFE soft seat (G) Type of trim P = Noise reducing perforated cage C
A = Anti-cavitation cage
Design temperature 14°F to 356°F (-10°C to +180°C)
1 = One
Material PTFE Number of 2 = Two
stages 3 = Three 1
Leakage ASME (ANSI) Class VI
Other = To be specified
Hard face (W) Trim B = Balanced
U
Design temperature 14°F to 1004°F (-10°C to +540°C) balancing U = Unbalanced
Material Hard faced stellite AISI 316 S = Standard
Bonnet type H = Extended for high temperature S
Leakage ASME (ANSI) Class IV or V L = Extended for low temperature
0 = No Reduction
Single and multiple stage cage Reduced trim 1 = 1 Reduction 1
Noise reducing perforated cage (P) 2 = 2 Reductions
3 = 3 Reductions
Design temperature 14°F to 1004°F (-10°C to +540°C)
Material Stainless steel AISI 316 ENC Cv To be specified Cv 35
How to order
Valve capacities see overleaf Example: 1 off 2" CE43PTC1US1 Cv 35 flanged to ASME 300.
Local regulations may restrict the use of this product to below the conditions quoted.
In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2011
Valve capacities Flow coefficient Cv (US) depending on the various trim options - Kvs values are shown in brackets.