Professional Documents
Culture Documents
In-Place: Inclinometers
In-Place: Inclinometers
_ IN-PLACE
INCLINOMETERS
INCLINOMETERS
& PENDULUMS
S410
S410_EN_11_09/2017
IN-PLACE
INCLINOMETERS
S410 MEMS In-Place Inclinometer (double wheel-carriage) is
specifically designed to combine the benefits of automatic monitoring
and the selective installation of probes at different depths.
APPLICATIONS FEATURES
• Landslides • Removable and modular
system for multiple installation
• Tunneling
• High accuracy
• Diaphragm walls
• Low thermal drift
• Dams
• Available in both digital and
• Deep excavations
4-20mA version
• Unstable slopes
• Nearly real-time monitoring with
• Piles OMNIAlog and miniOMNIAlog
S410_EN_11_09/2017
TECHNICAL
SPECIFICATIONS
S411HA15 UNIAXIAL S411HA30 UNIAXIAL S411HD15 UNIAXIAL S411HD30 UNIAXIAL
S412HA15 BIAXIAL S412HA30 BIAXIAL S412HD15 BIAXIAL S412HD30 BIAXIAL
Model Analogue In-Place Inclinometers Digital In-Place Inclinometers
Measuring range ±10°, ±15° ±20°, ±30° ±10°, ±15° ±20° ±30°
Accuracy
Lin. MPE(2) ±0.150% FS for ±10°, ±20° ±0.025% FS for ±10°, ±15°
±0.200% FS for ±15°, ±30° ±0.070% FS for ±20°, ±30°
Signal output 4-20 mA (current loop) RS-485 with Modbus RTU protocol (3)
(1) Sensitivity is a specific paramenter different for every gauge. The sensitivity is calculated during gauge calibration test and inserted into the Calibration Report. (2)) MPE is the Maximum Permitted Error on the
measuring range (FSR). In the Calibration Report, the accuracies of the gauge are calculated using both linear regression (≤ Lin. MPE) and polynomial correction (≤ Pol. MPE)
PHYSICAL FEATURES
PROBE FEATURES
Material stainless steel and thermoplastic resin stainless steel and thermoplastic resin
C B C
S410_EN_11_09/2017
ACCESSORIES AND SPARE PARTS
FOR ANALOGUE MEMS IPIS
Support multiplexer box
head or OVP junction box
to OMNIAlog
datalogger
Inclinometer casing
Bottom cap
S410_EN_11_09/2017
ACCESSORIES AND SPARE PARTS
FOR DIGITAL MEMS IPIS
Support Digital IPI Junction box or
head cable measuring box
to OMNIAlog
datalogger
Inclinometer casing
Bottom cap
S410_EN_11_09/2017
LANDSLIDE After a number of manual inclinometer surveying, the sliping surface is identified. Therefore is possible
to organize an automatic monitoring by installing IPIs in the vicinity of the sliping surface dept and one
APPLICATION IPI in the bottom point of each casing as reference.
OMNIAlog
field station
Junction box
Support head
FIRM SOIL
All the information in this document is the property of Sisgeo S.r.l. and should not be used without permission from Sisgeo S.r.l.
We reserve the right to change our product without prior notice.