Professional Documents
Culture Documents
A L L Diagnostic Trouble Codes (DTC) : P Code Charts P0315
A L L Diagnostic Trouble Codes (DTC) : P Code Charts P0315
A L L Diagnostic Trouble Codes (DTC) : P Code Charts P0315
52SS Page 1
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. See: Testing and Inspection/Initial Inspection and
Diagnostic Overview
* Review Strategy Based Diagnosis for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions provide an overview of each diagnostic category.
DTC Descriptor
DTC P0315
- Crankshaft Position (CKP) System Variation Not Learned
Circuit/System Description
The crankshaft position (CKP) system variation learn feature is used to calculate reference period errors caused by slight build tolerance variation
in the CKP sensor, crankshaft, and CKP sensor position. The calculated error allows the engine control module (ECM) to accurately compensate
for reference period variations. This enhances the ability of the ECM to detect misfire events over a wide range of engine speeds and load
conditions. The ECM stores the Crankshaft Position System Variations values after a learn procedure has been performed. If the actual crankshaft
position variation is not stored within the CKP compensating value look up table, then DTC P0300 may set. If the CKP system variation values
are not stored in the ECM memory, or a proper ECM power down does not occur after completing the CKP Learn Procedure, then DTC P0315
sets.
The ECM detects that the CKP system variation values are not stored in memory.
Diagnostic Aids
This test procedure requires that the vehicle battery has passed a load test and is completely charged. Refer to Battery Inspection/Test. See:
Starting and Charging/Testing and Inspection/Component Tests and General Diagnostics/Battery Inspection/Test
Circuit/System Testing
Important: The CKP System Variation Learn Procedure may have to be repeated up to 5 times before the procedure is learned.
Perform the CKP System Variation Learn Procedure. Refer to Crankshaft Position System Variation Learn. The scan tool should display Learned
this Ignition. See: Powertrain Management/Computers and Control Systems/Crankshaft Position Sensor/Service and Repair
If the CKP System Variation Learn Procedure cannot be performed successfully, inspect for the following conditions:
Repair Instructions
2008 Chevy Truck Express 1500 RWD V6-4.3L Copyright © 2013, ALLDATA 10.52SS Page 2
Perform the Diagnostic Repair Verification after completing the diagnostic procedure. See: Verification Tests