Professional Documents
Culture Documents
GE Model Number EN218101 - Up To Date Replacement Proposal # 18MA12305
GE Model Number EN218101 - Up To Date Replacement Proposal # 18MA12305
Dear Customer,
Thank you for your requested, we are pleased to submit our proposal.
If you have any questions or needed additional information, please let us know.
©COPYRIGHT 2014 GENERAL ELECTRIC (USA), LLC AND/OR ITS AFFILIATES. All rights reserved. The information
contained herein belongs to the General Electric Company (USA), LLC and/or their affiliates, which has been
provided solely for the express reason of restricted private use. All persons, firms, or corporations who
receive such information shall be deemed by the act of their receiving the same to have agreed to make
no duplication, or other disclosure, or use whatsoever for any, or all such information except as expressly
authorized in writing by the General Electric Company (USA), LLC and/or its affiliates.
GE Imagination at Work
GE Power Conversion
Technical
All products are according to the standard NEMA MG-1 / IEEE STD 112 and the customer
specifications listed below, subject of terms of this proposal.
1. Data Sheet
Standard : NEMA
Out Power (HP) : 1000
Frame : 1338
Motor Type :K
Voltage (V) : 6000
Frequency (Hz) : 50
Enclosure : TEFV
Pole : 10
Speed (RPM) : 600
SF (Service factor) : 1.00
Insulation Class :F
Construction : Horizontal
Temp. Rise (o C) : 80
Hazardous Area : Class II Div. I Group F
Model No. : EN218101 (will be confirmed after approval
drawing)
3. Test
NEMA Complete Test – Non-Witnessed - 1 unit(s) with details as follow:
a. AC high-potential test
b. Determination of breakdown torque
c. Determination of efficiency and power factor at 100/75/50 % load
d. Determination of full load current and speed
e. Determination of locked rotor analyze (current and torque)
f. Determination of no-load losses
g. Determination of rotation at 100/75/50 % load
h. Heat run
i. Measurement of insulation resistance
GE Power Conversion
4. Clarifications
a. All products are according to the standard NEMA MG-1/IEEE STD 112 and the
Customer specifications listed below, subject of terms of this proposal.
b. This quotation is for a duplicate motor of model # EN218101, with accessories and
performance unique of this model number, components may change.
c. Air ducts and blowers are not included in motor scope.
d. This quotation does not include any installation, start-up of field-testing.
e. We are offering our standard Painting Procedure.
f. GE is offering its standard export boxing for ocean freight. Our standard export
boxing is not suitable for storage. For further instruction please refer to the Receiving,
Handling and Storage Instructions attached to this proposal. If requested, we can
provide export box suitable for storage as additional price.
GE Power Conversion
Appendix 1
List of Contractual Documents Supplied after Order Acknowledgment
For induction motor and synchronous motor:
Outline drawing
Data Sheet
Conduit box drawing
Nameplate drawing
Starting characteristic curves (not applicable for wound rotor motors or motors that will
operate with VFD)
Performance curves (not applicable for wound rotor motors or motors that will operate with
VFD)
Thermal limit curves (not applicable for wound rotor motors or motors that will operate with
VFD)
Test Reports
Instruction and Operation Manual (IOM)
All documentation is supplied in Portuguese or English or Spanish.
Appendix 2
Standard Painting Procedure
SURFACE PREPARATION : ACCORDING TO SIS Sa 2 ½ NEAR WHITE METAL BLAST
PRIMER : ONE COAT OF "PRIMER EPOXY POLYAMID SHERWIN WILLIAMS – SHER TILE HS
PRIMER BR
STANDARD COLOR : GRAY
SUBTOTAL DRY THICKNESS : 5.5 MILS (140 um)
FINISH : ONE COAT OF ACRYLIC ALIPHATIC POLYURETHANE SHERWIN WILLIANS – POLANE
234
FINISH COLOR : DARK GRAY – MUNSELL N3.5
DRY THICKNESS : 2.4 MILS (60 um)
TOTAL DRY THICKNESS : 7.9 MILS (200 um)