Professional Documents
Culture Documents
Aledon Babbage
Aledon Babbage
2. What is Ohm’s?
The Ohms is the International Standard Unit of measuring electrical resistance. It can
be easily defined as the resistance of electricity flowing between two points or endpoints
carrying an electrical current with a measure of one ampere when exposed to a
potential difference of one volt.
Electrical Power refers to the rate at which electricity is circulating from within an
electrical circuit. It can be described as the rate in which the energy within the circuit is
expading and is the result of the two variables namely the voltage and current .
Copper is one of metals that is able to conduct electricity well into the circuit. It is given
that metals have low resistivity rate and as a result, metals have high conductivity rate.
The resistivity rate of copper is 0.0171 Ohms.
The unit of measurement for resistance is measured in Ohms. The value of resistance
is represented with the Greek Letter Omega (Ω).
Ohm’Law= (V(Voltage)=I(Current)R(Resistance)
Current=Voltage/Resistance
C=160V/2Ω
The current is 80 A.
7. What is the current in a 160V circuit if the resistance is 20Ω?
Ohm’Law= (V(Voltage)=I(Current)R(Resistance)
Current=Voltage/Resistance
C=160V/20Ω
C=8 A (8 amperes)
The current is 8 A.
Ohm’Law= (V(Voltage)=I(Current)R(Resistance)
Current=Voltage/Resistance
C=160V/10Ω
The current is 16 A.
Ohm’Law= (V(Voltage)=I(Current)R(Resistance)
Current=Voltage/Resistance
C=160V/5Ω
The current is 32 A
10. Based on questions 2, 3, and 4, what happens to the current in a circuit as the
resistance decreases? Increases?
From the problems stipulated in the said numbers, we can conclude that the current in
within the circuit increases because the resistance has been decreasing in every
problem. Also when the resistance increases, the current within the circuit decreases.
11. What is required to move 6A through 5Ω?
Ohm’Law= (V(Voltage)=I(Current)R(Resistance)
V=IR
Voltage= 6A x 5 Ω
Voltage= 30 V
Ohm’Law= (V(Voltage)=I(Current)R(Resistance)
V=IR
Voltage= 6A x 10Ω
Voltage= 60 V
Ohm’Law= (V(Voltage)=I(Current)R(Resistance)
V=IR
Voltage= 6A x 20Ω
Voltage= 120 V
14. Based on questions 11, 12, 13, what happens to the required in a circuit as the
resistance decreases? Increases?
From the problems stipulated in the said numbers, we can conclude that the voltage
required in the circuit decreases when the resistance is decreasing. Also, the voltage
required in the circuit increases when the resistance increases.
15. Create your own problem and provide the solution.
What is the voltage required for the circuit if to move 8A with a circuit resistance of 6 Ω
Ohm’Law= (V(Voltage)=I(Current)R(Resistance)
V=IR
Voltage= 8A x 6Ω
Voltage= 48 V