Professional Documents
Culture Documents
ABB Fox515 Module Config PDF
ABB Fox515 Module Config PDF
ABB Fox515 Module Config PDF
SYNUF
63 x VC-12 Type tests witnessed by KEMA, Holland
1 x STM-1 STM-1
Electromagnetic compatibility
FOXMAN-UN network management system EMC EN 300 386 V1.3.3
NEBRO 4 x 10/100 BaseT IEC 61 000–6–3
63 x VC-12
Ethernet:
S-BUS: 2 Segments, 2 x VC-4 each
230 VAC Transport (not for batteries BATMO) ETS 300 019–1–2, class 2.2
Distance protection relay Temperature range - 40°C … + 70°C
4 x commands Protection relay Humidity Clima diagram class 2.2
TEBIT
n x 64 kbit/s 1 x 10/100 BaseT
8 x aux signals
Teleprotection & OPTIF – REL316 Operation ETS 300 019–1–3, class 3.2
event recorder 4 x 2 Mbit/s 1 x 100 Base-FX
Diff protection IF – REL551, REL561 Temperature range - 20°C … + 55°C
(max. 4 x ports) 4 x IEEE C37.94 – RED670, RED650
without fan - 20°C … + 45°C
24 x ext. alarms ALCAR or ABB optics – other relais with IEEE C37.94 interface
n x 64 kbit/s Startup temperature - 20°C
Collecting external
4 x control output alarms Humidity max 95%, non-condensing
LOMIF
8 x 2 Mbit/s 8 x E1 (2 Mbit/s) Clima diagram class 3.2
8 x E1 (2 Mbit/s)
G.703 / G.704
P-BUS: 128 x 2 Mbit/s
GECOD
8 x 64 kbit/s n x 64 kbit/s
G.703 module
Telephony exchange G.703 SFP overview
LOMI4
4 x 2 Mbit/s 4 x E1 (2 Mbit/s) 4 x E1 (2 Mbit/s) SYNUF SYN4E NEBRx SWITE OPTIF
G.703 / G.704
STM-1 electrical x x
EXLAN
12 x voice 2-wire a/b n x 64 kbit/s S-1.1 x x
2-wire subscriber
(FXO) ETER1 L-1.1 x x
16 x 2 Mbit/s 4 x 10/100 BaseT
R1: L2-switching
L-1.2 x x
R2: L3-routing
ISDN Modules X-1.2 x x
8 x 144 kbit/s n x 64 kbit/s
ISDN-U interface CWDM x x
2-wire a/b SWITE 6 x 10/100 BaseT
2B1Q or 4B3T
S-4.1 x
Power over Eth
2 x 1000 Base-SX/LX L-4.1 x
L2-switching
L-4.2 x
PCONV X-4.2 x
8 x 2 Mbit/s 2 x 2 Mbit/s
V5.x protocol 100 BASE-SX x
converter G.703
4 x V.24 / V.28 DATAR / DATA4 100 BASE-FX x x
4 x 2 Mbit/s
Legacy data + Eth 100 BASE-LX x
1 x 10/100 BaseT (max. 4 x ports)
PCON2 1000 BASE-SX x x
10 x 2 Mbit/s
V5.x protocol
converter 1000 BASE-LX x x
4 x V.11 / X.24 DATAT / DATA1 1000 BASE-TX x x
© ABB Switzerland Ltd, February 2012. The right to modifications or deviations due to technical progress is reserved.
4 x 2 Mbit/s
1 x 10/100 BaseT Legacy data + Eth
(max. 4 x ports) Available interfaces:
STIC1 n x 64 kbit/s (n = 1-32)
8 x 2 Mbit/s 8 x 1-pair 1 x 1-pair DTM-M 1x
SHDSL module – G.703 / G.704, V.24 / Main FOXMAN-UN network management system features
4 x 2-pair 1 x 2-pair Desktop 1 x IF
4 x V.35 X.21/ V.11 / V.35 / V.36
DATAV / DATA3 SHDSL SHDSL Full-featured management system for various ABB communication equipment including
4 x 2 Mbit/s – 10/100 BaseT
1 x 10/100 BaseT Legacy data + Eth
(max. 4 x ports) FOX515/512, FOX660 and legacy FOX-U
Programmable IF: – Supervision of communication network
Max. 2 x REG
– V.24 / V.28 STIC2 – Graphical network display with comprehensive fault management
4 x interfaces DATAS / DATA5 8 x 2 Mbit/s SHDSL module with 8 x 1-pair 1 x 1-pair REG 1 x 1-pair
– X.24 / V.11 4 x 2 Mbit/s
Legacy data + Eth power for REG/ 4 x 2-pair 1 x 2-pair 1 x 2-pair – Alarm list
– V.35 1 x 10/100 BaseT DTM-M
(max. 4 x ports) SHDSL SHDSL SHDSL
– RS485 (4-wire) – Event list
STICx – Configuration management
8 x 1-pair
NEMSG SHDSL module – Full configuration of network elements
8 x voice 1 x 2 Mbit/s 4 x 2-pair
8 x trunk lines – Backup of configurations
2/4-wire E&M 2/4-wire E&M
– Security management
1KHA - 000 744 - SEN - 02.12 - Printed in Switzerland
SUBH3
30 x voice 1 x 2 Mbit/s Tupon
30 x subscribers 8 Mbit/s MCMI
2-wire a/b (FXS) opt. / el.
interface SDH / PDH Protection Ethernet
modules modules modules
www.abb.com/utilitycommunications
Technical data of FOX512 & FOX515
NEMSG voice and E&M DTM-M SHDSL desktop
SDH features Max. 3 x TU-3 or 63 x TU-12 termination to SBUS TUNOR optical desktop
Analogue telephony modules Number of optical ports 1 x 8 Mbit/s, optical
PDH aggregate modules EXLAN / EXLA6 FXO For more information please contact:
FC/PC connector
TUPON optical PDH Number of ports 12 x 2-wire FXO to UBUS Transmission code MCMI + telemetry, according to G.742
Number of optical ports 1 x 8 Mbit/s PDH, optical according ITU-T Q.522 (Z-interface) Attenuation range Up to 20 dB (approx. 30 km) ABB Switzerland Ltd
E2000 (type LSH-HRL) connector Coding A-law according ITU-T G.711 Optical wavelength 1300 nm Power Systems
Transmission code MCMI + telemetry, according to G.742 Input (from exchange) - 5 ... + 4 dBr, programmable Number of electrical ports 4 x E1 ports according to G.703
Output (to exchange) - 7.5 ... - 3 dBr, programmable
Brown Boveri Strasse 6
Bit rate 2048 kbit/s ± 50 ppm
Wavelength 1300 nm 1500 nm Nominal impedance Complex (EXLAN) or 600 Ω (EXLA6) 5400 Baden, Switzerland
Line impedance 75 Ω asymmetrical or 120 Ω symmetrical
Launched power – 10 ± 2 dBm – 2 ± 2 dBm Channel bandwidth 300 ... 3400 Hz Phone: +41 58 589 37 35
Local power supply 115 VAC ±10%, 50/60 Hz
Minimum sensitivity – 40 dBm – 40 dBm Signalling & functionality Seizure, ringing, ringing off, transmission of flash 230 VAC ±10%, 50 Hz or +41 844 845 845 (Call Center)
Attenuation range 26 dB 34 dB pulses, pulse dialling, DTMF without accompanying 48 VDC, 60 VDC: - 36 VDC … - 72 VDC Fax: +41 58 585 16 88
signal, earth key, charging using 12/16 kHz pulses
Number of electrical ports 4 ports according to G.703 E-Mail: utilitycommunications@ch.abb.com
Bit rate 2048 kbit/s ± 50 ppm
Line impedance 75 Ω asymmetrical or 120 Ω symmetrical www.abb.com/utilitycommunications
We reserve all rights in this document and in the information contained therein. This system overview does neither claim completeness nor availability of modules or functions and ABB reserves the right to insert, postpone or remove modules and functions without further notice.
Reproduction, use or disclosure to third parties without express authority is strictly forbidden. © ABB Switzerland Ltd, Power Systems, 2011.