Professional Documents
Culture Documents
13579
13579
13579
(A) (B)
Paint part (External Surface) General Part Joint part
Reference As per Cl 9.7.4 of CA-III-Specifications Recommended Paint System
DFT DFT
Paint detail Paint type Paint type
(Micro-m) (Micro-m)
Abrasive blast cleaning to minimum SA-2.5 SIS- Abrasive Grit blast cleaning to minimum SA-2.5 SIS-
Surface treatment --- ---
055900 near – white blast cleaning 055900 near – white blast cleaning
150
1st Under-Coat --- --- Product Name: Berger Protectomastic TIO coating XL
Airless spray or Brush
Epoxy high build micaceous iron oxide coating
90
nd
2 Under-Coat --- --- polyamide
Product Name: Berger Epilux 4 High Build MIO Airless spray or Brush
Acrylic polyurethane finish aliphatic isocyanate 30 Acrylic polyurethane finish aliphatic isocyanate 30
Intermediate Coat
Product Name: Berger thane Spray or Brush Product Name: Berger thane Spray or Brush
Acrylic polyurethane finish aliphatic isocyanate 30 Acrylic polyurethane finish aliphatic isocyanate 30
Finish Coat
Product Name: Berger thane Spray or Brush Product Name: Berger thane Spray or Brush
Inorganic zinc silicate primer (Product Name: Berger Zinc Anode 304 MZ) which is specified as 1st Under-Coat in Cl 9.7.4 of CA-III-Specifications cannot be applied to the surface treatment equivalent to ST3..
Therefore, with consideration of paint system specified in Cl 9.7.4 of CA-III-Specifications as mentioned in above (A), Berger Paints India Ltd recommends the equivalent paint system for Joint Part as mentioned in above (B).
Signed by Vender of Paint Product Signed by Vender of Painting Work Signed by Contractor
(Berger Paints India Ltd) (P&R Infraprojects Ltd) (JFE- GAMMON CONSORTIUM)